Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus
Tóm tắt
Từ khóa
Tài liệu tham khảo
Russel, 1985, Moisture and temperature effects on the mixed mode delamination fracture in graphite/epoxy, ASTM STP 876, 349
Benzeggagh, M. L., Prel, Y. J. & De Charentenay, F. X., Experimental analysis of mode I delamination testing. 5th Int. Conf. on Composites Materials, ICCMV, San Diego, CA.
Prel, 1986, Étude par élément finis et corrélation expérimentale du délaminage en mode I et en mode II, JNC5, 49
Vanderkley, 1981, Mode I-mode II delamination fracture toughness of a unidirectional graphite/epoxy composite, Masters thesis
Bradley, 1985, Matrix deformation and fracture in graphite reinforced epoxies, 389
Benzeggagh, 1989, A mixed mode delamination specimen and its finite element analysis, ICCM 7, 210
Davies, 1987, Comportement en délaminage des matériaux composites à matrice thermoplastiques
Hashemi, 1990, The effects of geometry, rate and temperature on the mode I, mode II and mixed mode I + II interlaminar fracture of carbon fiber/poly(ether ketone) composites, J. Comp. Mater., 24, 918, 10.1177/002199839002400902
Benzeggagh, 1989, A mixed mode specimen for interlaminar fracture testing, Comp. Sci. Technol., 34, 129, 10.1016/0266-3538(89)90101-2
Benzeggagh, 1988, Rupture interdélaminatoire en mode mixte I + II, JNC6, 365
Ramkumar, 1985, Characterization of mode I and mixed mode delamination growth in T300/5028 graphite epoxy, ASTM STP 876, 315
O'Brien, 1982, Characterization of delamination onset and growth in composite laminate, ASTM STP 775, 140
Gong, 1992, Determination of the mixed mode delamination toughness using an imposed displacement cantilever beam test method, ECCM 5
Crews, 1988, A mixed mode bending apparatus for delamination testing, NASA TM 100662 Report
Gong, 1995, Mixed mode interlaminar fracture toughness of unidirectional glass/epoxy composite, ASTM STP 1230, 100
Gong, 1992, Rupture interlaminaire en mode mixte I + II du composite stratifié verre/epoxy unidirectionnel et multidirectionnel
Aboura, 1992, Étude comparative entre deux tests de mode mixte I + II introduisant des géométries d'éprouvettes de types IDCB et MMB, JNC 8, 679
Reeder, 1991, Non-linear analysis and redesign of the mixed mode bending delamination test, NASA TM 102777
Laksimi, 1991, Mode I interlaminar fracture of symmetrical cross-ply composites, Comp. Sci. Technol., 41, 147, 10.1016/0266-3538(91)90025-K
Friedrich, 1989, Fracture analysis of polymer composites, Vol. 6, 425
Corleto, 1987, Correspondence between stress fields and damage zones ahead of crack tip of composites under mode I and mode II loading
Arcan, 1987, SEM fractography of pure and mixed mode interlaminar fractures in graphite/epoxy composites, 41
Hibbs, 1987, Correction between micromechanical failure processes and the delamination toughness of graphite/epoxy systems, 68
Benzeggagh, 1992, Mixed mode delamination in unidirectional glass/epoxy composites under static and fatigue loading, ICCM IX
Aboura, 1993, Etude du processus de délaminage mode I, mode II et mode mixte I + II de matériaux composites à renforts tissée à différentes vitesses de sollicitation
Singh, S. & Partridge, I. K., Delamination failure in unidirectional carbon fibre/epoxy under mixed mode loading. Polym. & Polym. Comp. (submitted).