Mathematical modeling of the solar regenerative heat exchanger under turbulent oscillating flow: Applications of renewable and sustainable energy and artificial heart

Beni, 2007 Mortazavy Beni, 2009 Beni, 2010 Mortazavy Beni, 2007, 3-D Numerical analysis of thermal/fluid characteristics of woven mesh structures as heat regenerators, 13th, 112 Raihananda, 2021, Low-cost floating solar still for developing countries: prototyping and heat-mass transfer analysis, Results Eng., 12, 10.1016/j.rineng.2021.100300 Dorer, 2009, Energy and CO2 emissions performance assessment of residential micro-cogeneration systems with dynamic whole-building simulation programs, Energy Convers. Manag., 50, 648, 10.1016/j.enconman.2008.10.012 Formosa, 2010, Analytical model for Stirling cycle machine design, Energy Convers. Manag., 51, 1855, 10.1016/j.enconman.2010.02.010 Timoumi, 2008, Performance optimization of Stirling engines, Renew. Energy, 33, 2134, 10.1016/j.renene.2007.12.012 Organ, 1997 Rühlich, 1999 Tanaka, 1990, Flow and heat transfer characteristics of the Stirling engine regenerator in an oscillating flow, JSME Int J, 33, 283 Ibrahim, 2001 Tong, 1960 Gedeon, 1996, 198442 Thomas, 2000, Evaluation of 5 different correlations for the heat transfer in Stirling engine regenerators, Proc Eur Stirling Forum, 35, 111 Miyabe, 1982, An approach to the design of Stirlingengine regenerator matrix using packs of wire gauzes, Proc IECEC, 17, 1839 Kolodziej, 2012, Heat transfer and flow resistance for stacked wire gauzes: experiments and modeling, Int. J. Heat Fluid Flow, 33, 101, 10.1016/j.ijheatfluidflow.2011.11.006 Tew, 2004 Cheadle, 2011 Tao, 2009, Numerical analysis on pressure dropand heat transfer performance of mesh regenerators used in cryocoolers, Cryogenics, 49, 497, 10.1016/j.cryogenics.2009.07.003 Wilcox, 1994 Fluent Dynamics Software, 2010, Ansys fluent, 1, 7601 Lemmon, 2000, Thermodynamic properties of air and mixtures of nitrogen, argon, and oxygen from 60 to 2000 K at pressures to 2000 MPa, J. Phys. Chem. Ref. Data, 29, 10.1063/1.1285884 Lemmon, 2004, Viscosity and thermal conductivity equations for nitrogen, oxygen, argon, and air, Int. J. Thermophys., 25, 21, 10.1023/B:IJOT.0000022327.04529.f3 Hewitt, 2008 Conde, 2011 Ji-Wook, 2002, Thermal/fluid characteristics of isotropic plain-weave screen laminates as heat exchange surfaces Schmidt, 1981 Jaffe, 1988, A review of test results on solar thermal power modules with dish-mounted Stirling and Brayton cycle engines, ASME J. Sol. Energy Eng., 110, 268, 10.1115/1.3268267 Xu, 2002, In-plane effective thermal conductivity of plain- weave screen laminates, IEEE TCPT, 25, 615 Mancini, 2003, Dish-Stirling systems: an overview of development and status, J. Sol. Energy Eng., 12, 135, 10.1115/1.1562634 Wirtz, 2003, Thermal/fluid characteristics of 3-D woven mesh structures as heat exchanger surfaces, IEEE Trans. Compon. Packag. Technol., 26, 40, 10.1109/TCAPT.2003.811476 Mortazavy Beni, 2019, Study of the sneezing effects on the real human upper airway using fluid–structure interaction method, J. Braz. Soc. Mech. Sci. Eng., 10.1007/s40430-019-1677-z Mortazavy Beni, 2019, In silico investigation of sneezing in a full real human upper airway using computational fluid dynamics method, Comput. Methods Progr. Biomed., 177, 203, 10.1016/j.cmpb.2019.05.031 Hamed, 2020, SARS-CoV-2 droplet deposition path and its effects on the human upperairway in the oral inhalation, Comput. Methods Progr. Biomed. Mortazavy Beni, 2021, Experimental tracking and numerical mapping of novel coronavirus micro-droplet deposition through nasal inhalation in the human respiratory system, Biomech. Model. Mechanobiol., 20, 1087, 10.1007/s10237-021-01434-8 Beni, 2021 Alaodolehei, 2020, Performance enhancement of an achalasia automatic detection system using ensemble empirical mode decomposition denoising method, J. Med. Biol. Eng., 40, 179, 10.1007/s40846-019-00497-4