Mathematical model in dynamic mass measurement with consideration of position variation of fulcrum point

Kamimura, 1995, Design of optimum FIR filter for eliminating mechanical noise in weight measurement with loadcell, Acoustical Society of Japan, 51, 845 Umemoto, 2011, Improvement of accuracy for continuous mass measurement in checkweighers with an adaptive notch filter, Trans. Soc. Instrum. Control Eng., 47, 477, 10.9746/sicetr.47.477 Sun, 1998, On the fast and high accurate mass measurement under the conditions of floor vibration. On the method of compensating the difference in dynamics without on-line identification, Japan Society for Precision Engineering, 64, 1029, 10.2493/jjspe.64.1029 Sun, 1999, On the fast and high accurate mass measurement under the conditions of floor vibration. On the method of compensating the difference in dynamics by using the approximate polynomial model, Japan Society for Precision Engineering, 65 Tsuzura, 2019, Vibration compensation for checkweigher using dummy load cell, Proc. of APMF, 80 Yamakawa, 2020, Vibration compensation using dummy load-cell in dynamic mass measurement, Acta IMEKO, 9, 75, 10.21014/acta_imeko.v9i5.942 Yamakawa, 2014, Mathematical model of checkweigher with electromagnetic force balance system, Acta IMEKO, 3, 9, 10.21014/acta_imeko.v3i2.86 Yamakawa, 2017, Reduction of the effect of floor vibrations in a checkweigher using an electromagnetic force balance system, Acta IMEKO, 6, 65, 10.21014/acta_imeko.v6i2.405