Vấn đề vật liệu trong quản lý chất thải hạt nhân

N. Tsoulfanidis and R.G. Cochran, “Radioactive Waste Management,” Nuclear Technology, 93 (1991), pp. 263–304. H. Ocken, “Radiation-Field Control Manual—1997 Revision,” EPRI Report TR-107991 (Palo Alto, CA: EPRI, October 1997). Y.S. Tang and J.H. Saling, Radioactive Waste Management (Washington, D.C.: Hemisphere Publishing Corporation, 1990). Technical Position on Waste Form, Revision 1 (Washington, D.C.: Office of Nuclear Materials Safety and Safeguards, U.S. Nuclear Regulatory Commission, January 1991). L.L. Hench, D.E. Clark, and J. Campbell, “High Level Waste Immobilization Forms,” Nuclear and Chemical Waste Management, 5 (1984), pp. 149–173. L.H. Johnson and D.W. Shoesmith, “Spent Fuel,” Radioactive Waste Forms for the Future, ed. W. Lutze and R.C. Ewing (Amsterdam: North-Holland, 1988). R.A. Knief, Nuclear Engineering (Washington, D.C.: Hemisphere Publishing Corporation, 1992). The Management of Radioactive Waste (London: The Uranium Institute, August 1991). W. Lutze, “Silicate Glasses,” in Ref. 6. R.C. Ewing, W.J. Weber, and F.W. Clinard, “Radiation Effects in Nuclear Waste Forms for High-Level Radioactive Waste,” Progress in Nuclear Energy, 29 (2) (1995), pp. 63–127. A.E. Ringwood et al., “Synroc,” in Ref. 6. For example, K.L. Murty, “Texture-Based Physical, Mechanical and Corrosion Characteristics of Zirconium Alloys,” Textures in Materials Research, ed. R.K. Ray and A.K. Singh (New Delhi, India: Oxford & IBH Publishing Co., Ltd., 1999), pp. 113–160. K.L. Murty, “Stress Corrosion Cracking and Pellet Cladding Mechanical Interaction of Zircaloys—Application to LWRs,” Emerging Trends in Corrosion Control—Evaluation, Monitoring and Solutions, ed. A.S. Khanna, K.S. Sharma, and A.K. Sinha (New Delhi, India: Akademic Books International, 1999), pp. 702–710. B. Grambow, “Source Terms for Performance Assessment of HLW-Glass and Spent Fuel as Waste Forms,” Scientific Basis for Nuclear Waste Management, Mat. Res. Soc. Symp. Proc. Vol. 506 (Warrendale, PA: MRS, 1998), pp. 141–152. S. Stroes-Gascoyne, J. Nuclear Mater., 190 (1992), pp. 87–100. K.L. Murty, “Internal Pressurization Creep of Thin-Walled Tubing of Zr-Alloys for Dry Storage Feasibility of Nuclear Spent Fuel.,” in this issue. J.S. Small, D.P. Trivedi, and P.K. Abraitis, “Modeling of Glass Dissolution and Transport with the Code SUGAR,” Scientific Basis for Nuclear Waste Management, Mat. Res. Soc. Symp. Proc. Vol. 506 (Warrendale, PA: MRS, 1998), pp. 253–260. R.D. McCright et al., “Candidate Container Materials for Yucca Mountain Waste Package Design,” Proc. Nuclear Waste Packaging Focus ’91 Conf. (La Grange Park, IL: American Nuclear Society, 1991). Waste Package Final Update to EIS Engineering File, BBA000000-01717-5705-00019 Rev 01 (Washington, D.C.: TRW Environmental Safety Systems, Inc., U.S. Department of Energy, March 1999). Code of Federal Regulations, Title 10, Chapter 1, Part 61, “Licensing Requirements for Land Disposal of Radioactive Waste,” Federal Register, 47, 57446 (Rockville, MD: U.S. Nuclear Regulatory Commission, 1982). D.B. Bullen et al. (in this issue). W. Miller et al., Natural Analogue Studies in the Geological Disposal of Radioactive Waste (Amsterdam: Elsevier Science, 1994). L. Werme, P. Sellin, and N. Kjellbert, Copper Canisters for Nuclear High Level Waste Disposal. Corrosion Aspects, SKB Technical Report, TR-92-26 (Stockholm, Norway: SKB, 1992). Viability Assessment of a Repository at Yucca Mountain, DOE/RW-0508 (Washington, D.C.: Office of Civilian Radioactive Waste Management, U.S. Department of Energy, December 1998). M.-S. Yim, Evaluation of Waste Forms for Immobilization of C-14 and I-129, EPRI Report TR-110096 (Rockville, MD: EPRI, 1998). K.L. Murty, “Significance and Role of Deformation Micromechanisms in Life-Predictive Modeling of Aging Structures,” Appl. Mech. Rev. 5, (May 1993), pp. 194–200. Code of Federal Regulations, Title 10, Chapter 1, Part 60, “Disposal of High-Level Radioactive Waste in Geologic Repositories,” Federal Register, 48, 120, 28194 (Rockville, MD: U.S. Nuclear Regulatory Commission, 1983). H.K. Manaktala and C. G. Interrante, Technical Considerations for Evaluating Substantially Complete Containment of High-Level Waste Within the Waste Package, NUREG/CR-5638 (Rockville, MD: U.S. Nuclear Regulatory Commission, 1990). S. Stroes-Gascoyne and J.M. West, “An Overview of Microbial Research Related to High-Level Nuclear Waste Disposal with Emphasis on the Canadian Concept for the Disposal of Nuclear Fuel Waste,” Canadian J. of Microbiology, 42 (4) (1996), pp. 349–366. K.L. Murty et al., “In-Situ Nuclear Magnetic Resonance Study of Defect Dynamics During Deformation of Materials,” J. Mater. Sci., 31 (1996), pp. 3289–3297. K. Detemple et al., “In-Situ Nuclear Magnetic Resonance Investigation of Deformation-Generated Vacancies in Aluminum,” Phys. Rev., B52 (1995), pp. 125–133. K.L. Murty and M.D. Mathew, “Condition Monitoring of Structural Materials Using Nondestructive Ball Indentation Technique,” Int. Symp. Mater. Aging and Life Management (ISOMALM 2000). F.M. Haggag and K.L. Murty, “A Novel Stress-Strain Microprobe for Nondestructive Evaluation of Mechanical Properties of Materials,” Nondestructive Evaluation (NDE) and Materials Properties III, ed. P.K. Liaw et al. (Warrendale, PA: TMS, 1997), pp. 101–106. B. Raj, C.V. Subramanian, and T. Jayakumar, Nondestructive Testing of Welds (Narosa Publishing House and Materials Park, OH: ASM International, 2000).