Materials and manufacturing strategies for mechanically transformative electronics

Materials Today Advances - Tập 7 - Trang 100089 - 2020
S.-H. Byun1, J.Y. Sim2, K.-C. Agno1, J.-W. Jeong1
1School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141, Republic of Korea
2Welfare & Medical ICT Research Department, Electronics and Telecommunications Research Institute, Daejeon, 34129, Republic of Korea

Tài liệu tham khảo

Lim, 2020, Advanced soft materials, sensor integrations, and applications of wearable flexible hybrid electronics in healthcare, energy, and environment, Adv. Mater., 32 Zhang, 2020, A review of electronic skin: soft electronics and sensors for human health, J. Mater. Chem. B., 8, 852, 10.1039/C9TB02531F Liu, 2016, Epidermal mechano-acoustic sensing electronics for cardiovascular diagnostics and human-machine interfaces, Sci. Adv., 2, 10.1126/sciadv.1601185 Jeong, 2013, Materials and optimized designs for human-machine interfaces via epidermal electronics, Adv. Mater., 25, 6839, 10.1002/adma.201301921 Jeong, 2015, Soft materials in neuroengineering for hard problems in neuroscience, Neuron, 86, 175, 10.1016/j.neuron.2014.12.035 Sim, 2017, Microfluidic neural probes: in vivo tools for advancing neuroscience, Lab Chip, 17, 1406, 10.1039/C7LC00103G Qazi, 2018, Microscale inorganic LED based wireless neural systems for chronic in vivo optogenetics, Front. Neurosci., 12, 764, 10.3389/fnins.2018.00764 Dejace, 2019, Gallium-based thin films for wearable human motion sensors, Adv. Intell. Syst., 1, 1900079, 10.1002/aisy.201900079 Bartlett, 2016, Rapid fabrication of soft, multilayered electronics for wearable biomonitoring, Adv. Funct. Mater., 26, 8496, 10.1002/adfm.201602733 Kim, 2011, Epidermal Electronics, Science, 333, 838, 10.1126/science.1206157 Kaltenbrunner, 2013, An ultra-lightweight design for imperceptible plastic electronics, Nature, 499, 458, 10.1038/nature12314 Wang, 2018, Skin electronics from scalable fabrication of an intrinsically stretchable transistor array, Nature, 555, 83, 10.1038/nature25494 Jang, 2017, Self-assembled three dimensional network designs for soft electronics, Nat. Commun., 8, 15894, 10.1038/ncomms15894 Constantinescu, 2016, Epidermal electronics for electromyography: an application to swallowing therapy, Med. Eng. Phys., 38, 807, 10.1016/j.medengphy.2016.04.023 Song, 2019, Wearable and implantable electronics: moving toward precision therapy, ACS Nano, 13, 12280, 10.1021/acsnano.9b08323 Schiavone, 2020, Soft, implantable bioelectronic interfaces for translational research, Adv. Mater. Xu, 2014, 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium, Nat. Commun., 5, 3329, 10.1038/ncomms4329 Qazi, 2019, Wireless optofluidic brain probes for chronic neuropharmacology and photostimulation, Nat. Biomed. Eng., 3, 655, 10.1038/s41551-019-0432-1 Minev, 2015, Electronic dura mater for long-term multimodal neural interfaces, Science, 347, 159, 10.1126/science.1260318 Noh, 2018, Miniaturized, battery-free optofluidic systems with potential for wireless pharmacology and optogenetics, Small, 14 Howe, 2018, Stretchable, implantable, nanostructured flow-diverter system for quantification of intra-aneurysmal hemodynamics, ACS Nano, 12, 8706, 10.1021/acsnano.8b04689 Markvicka, 2018, An autonomously electrically self-healing liquid metal–elastomer composite for robust soft-matter robotics and electronics, Nat. Mater., 17, 618, 10.1038/s41563-018-0084-7 Schmitt, 2018, Soft robots manufacturing: a review, Front. Robot. AI., 5, 84, 10.3389/frobt.2018.00084 Wen, 2019, Flexible, multifunctional neural probe with liquid metal enabled, ultra-large tunable stiffness for deep-brain chemical sensing and agent delivery, Biosens. Bioelectron., 131, 37, 10.1016/j.bios.2019.01.060 Park, 2019, Ultrastretchable elastic shape memory fibers with electrical conductivity, Adv. Sci., 6, 10.1002/advs.201901579 Poon, 2019, Phase-changing metamaterial capable of variable stiffness and shape morphing, Adv. Eng. Mater., 21, 10.1002/adem.201900802 Buckner, 2019, Enhanced variable stiffness and variable stretchability enabled by phase-changing particulate additives, Adv. Funct. Mater., 29, 10.1002/adfm.201903368 Hao, 2018, A eutectic-alloy-infused soft actuator with sensing, tunable degrees of freedom, and stiffness properties, J. Micromech. Microeng., 28, 10.1088/1361-6439/aa9d0e Zappetti, 2020, Phase changing materials-based variable-stiffness tensegrity structures, Soft Robot., 7, 362, 10.1089/soro.2019.0091 Alambeigi, 2016, A continuum manipulator with phase changing alloy, 758 Tonazzini, 2016, Variable stiffness fiber with self-healing capability, Adv. Mater., 28, 10142, 10.1002/adma.201602580 Schubert, 2013, Variable stiffness material based on rigid low-melting-point-alloy microstructures embedded in soft poly(dimethylsiloxane) (PDMS), RSC Adv., 3, 24671, 10.1039/c3ra44412k Van Meerbeek, 2016, Morphing metal and elastomer bicontinuous foams for reversible stiffness, shape memory, and self-healing soft machines, Adv. Mater., 28, 2801, 10.1002/adma.201505991 Yoshida, 2018, Multipoint bending and shape retention of a pneumatic bending actuator by a variable stiffness endoskeleton, Soft Robot., 5, 718, 10.1089/soro.2017.0145 Yang, 2017, Bioinspired robotic fingers based on pneumatic actuator and 3D printing of smart material, Soft Robot., 4, 147, 10.1089/soro.2016.0034 Zhang, 2019, Fast-response, stiffness-tunable soft actuator by hybrid multimaterial 3D printing, Adv. Funct. Mater., 29 Yang, 2019, 4D printing reconfigurable, deployable and mechanically tunable metamaterials, Mater. Horiz., 6, 1244, 10.1039/C9MH00302A Wang, 2020, Shape memory alloy-based soft finger with changeable bending length using targeted variable stiffness, Soft Robot., 7, 283, 10.1089/soro.2018.0166 Yang, 2017, Novel variable-stiffness robotic fingers with built-in position feedback, Soft Robot., 4, 338, 10.1089/soro.2016.0060 Pilate, 2014, Design of multistimuli-responsive shape-memory polymer materials by reactive extrusion, Chem. Mater., 26, 5860, 10.1021/cm5020543 Must, 2019, A variable-stiffness tendril-like soft robot based on reversible osmotic actuation, Nat. Commun., 10, 344, 10.1038/s41467-018-08173-y Li, 2019, Bioinspired variable stiffness dielectric elastomer actuators with large and tunable load capacity, Soft Robot., 6, 631, 10.1089/soro.2018.0046 Imamura, 2017, A variable stiffness dielectric elastomer actuator based on electrostatic chucking, Soft Matter, 13, 3440, 10.1039/C7SM00546F Shan, 2015, Rigidity-tuning conductive elastomer, Smart Mater. Struct., 24, 10.1088/0964-1726/24/6/065001 Jackson, 2018, Field responsive mechanical metamaterials, Sci. Adv., 4, 10.1126/sciadv.aau6419 Lee, 2015, Enhanced electroresponsive performance of double-shell SiO 2/TiO 2 hollow nanoparticles, ACS Nano, 9, 4939, 10.1021/nn5068495 Coon, 2019, Application of magneto-rheological fluids for investigating the effect of skin properties on arterial tonometry measurements, Front. Mater., 6, 45, 10.3389/fmats.2019.00045 Chang, 2018, Mechanically triggered composite stiffness tuning through thermodynamic relaxation (ST3R), Mater. Horiz., 5, 416, 10.1039/C8MH00032H Byun, 2019, Mechanically transformative electronics, sensors, and implantable devices, Sci. Adv., 5, 10.1126/sciadv.aay0418 Gao, 2019, The research status and challenges of shape memory polymer-based flexible electronics, Mater. Horiz., 6, 931, 10.1039/C8MH01070F Zhu, 2020, Liquid metal–based soft microfluidics, Small, 16, 10.1002/smll.201903841 Yan, 2018, Advances in liquid metals for biomedical applications, Chem. Soc. Rev., 47, 2518, 10.1039/C7CS00309A Yu, 2018, Recent advances in liquid metal manipulation toward soft robotics and biotechnologies, Chem. Eur J., 24, 9456, 10.1002/chem.201800605 Wang, 2018, Controllable and reversible tuning of material rigidity for robot applications, Materials, Today Off., 21, 563 Manti, 2016, Stiffening in soft robotics: a review of the state of the art, IEEE Robot. Autom. Mag., 23, 93, 10.1109/MRA.2016.2582718 Blanc, 2017, Flexible medical devices: review of controllable stiffness solutions, Actuators, 6, 23, 10.3390/act6030023 Zheng, 2015, Pneumatic balloon actuator with tunable bending points, 18 Rich, 2017, Liquid metal-conductive thermoplastic elastomer integration for low-voltage stiffness tuning, Adv. Mater. Technol., 2, 10.1002/admt.201700179 Nasab, 2017, A soft gripper with rigidity tunable elastomer strips as ligaments, Soft Robot., 4, 411, 10.1089/soro.2016.0039 Kukla, 2017, The determination of mechanical properties of magnetorheological elastomers (MREs), Procedia Eng., 177, 324, 10.1016/j.proeng.2017.02.233 Lee, 2018, Fabrication and characterization of natural rubber-based magnetorheological elastomers at large strain for base isolators, Shock Vib., 2018 Majidi, 2010, Tunable elastic stiffness with microconfined magnetorheological domains at low magnetic field, Appl. Phys. Lett., 97, 10.1063/1.3503969 Ge, 2016, Multimaterial 4D printing with tailorable shape memory polymers, Sci. Rep., 6, 10.1038/srep31110 Wu, 2016, Multi-shape active composites by 3D printing of digital shape memory polymers, Sci. Rep., 6 Carpenter, 2019, Healable thermoplastic for kinesthetic feedback in wearable haptic devices, Sensor Actuator A Phys., 288, 79, 10.1016/j.sna.2019.01.032 Shintake, 2015, Variable stiffness actuator for soft robotics using dielectric elastomer and low-melting-point alloy, 1097 Orita, 2016, Scalable electroactive polymer for variable stiffness suspensions, IEEE ASME Trans. Mechatron., 21, 2836, 10.1109/TMECH.2016.2586484 Gao, 2017, Wearable microfluidic diaphragm pressure sensor for health and tactile touch monitoring, Adv. Mater., 29, 10.1002/adma.201701985 Eddings, 2008, Determining the optimal PDMS–PDMS bonding technique for microfluidic devices, J. Micromech. Microeng., 18, 10.1088/0960-1317/18/6/067001 Park, 2012, Design and fabrication of soft artificial skin using embedded microchannels and liquid conductors, IEEE Sensor. J., 12, 2711, 10.1109/JSEN.2012.2200790 Hao, 2018, A variable degree-of-freedom and self-sensing soft bending actuator based on conductive liquid metal and thermoplastic polymer composites, 1 Meng, 2008, Self-organizing alignment of carbon nanotube in shape memory segmented fiber prepared by in situ polymerization and melt spinning, Compos. Appl. Sci. Manuf., 39, 314, 10.1016/j.compositesa.2007.10.007 Fassler, 2013, 3D structures of liquid-phase GaIn alloy embedded in PDMS with freeze casting, Lab Chip, 13, 4442, 10.1039/c3lc50833a Fassler, 2015, Liquid-phase metal inclusions for a conductive polymer composite, Adv. Mater., 27, 1928, 10.1002/adma.201405256 Ramachandran, 2019, All-fabric wearable electroadhesive clutch, Adv. Mater. Technol., 4, 10.1002/admt.201800313 Chenal, 2014, Variable stiffness fabrics with embedded shape memory materials for wearable applications, 2827 Jeong, 2014, Capacitive epidermal electronics for electrically safe, long-term electrophysiological measurements, Adv. Healthc. Mater., 3, 642, 10.1002/adhm.201300334 Jang, 2016, Ferromagnetic, folded electrode composite as a soft interface to the skin for long-term electrophysiological recording, Adv. Funct. Mater., 26, 7281, 10.1002/adfm.201603146 González-González, 2018, Thin film multi-electrode softening cuffs for selective neuromodulation, Sci. Rep., 8, 10.1038/s41598-018-34566-6 Ware, 2014, Thiol-ene/acrylate substrates for softening intracortical electrodes: substrates for intracortical electrodes, J. Biomed. Mater. Res., 102, 1, 10.1002/jbmb.32946 Simon, 2017, Design and demonstration of an intracortical probe technology with tunable modulus: design and demonstration of an intracortical probe technology, J. Biomed. Mater. Res., 105, 159, 10.1002/jbm.a.35896 Zátonyi, 2019, A softening laminar electrode for recording single unit activity from the rat hippocampus, Sci. Rep., 9, 2321, 10.1038/s41598-019-39835-6 Kim, 2013, Soft robotics: a bioinspired evolution in robotics, Trends Biotechnol., 31, 287, 10.1016/j.tibtech.2013.03.002 Polygerinos, 2017, Soft robotics: review of fluid-driven intrinsically soft devices; manufacturing, sensing, control, and applications in human-robot interaction, Adv. Eng. Mater., 19, 10.1002/adem.201700016 Yap, 2016, High-force soft printable pneumatics for soft robotic applications, Soft Robot., 3, 144, 10.1089/soro.2016.0030 Polygerinos, 2015, Soft robotic glove for combined assistance and at-home rehabilitation, Robot. Autonom. Syst., 73, 135, 10.1016/j.robot.2014.08.014 Kwon, 2020, Flat inflatable Artificial muscles with large stroke and adjustable force– length relations, IEEE Trans. Robot., 1 Ranzani, 2015, A bioinspired soft manipulator for minimally invasive surgery, Bioinspiration Biomimetics, 10, 10.1088/1748-3190/10/3/035008 Palli, 2014, On the control of a dielectric elastomer artificial muscle with variable impedance Carpi, 2014, Enabling variable-stiffness hand rehabilitation orthoses with dielectric elastomer transducers, Med. Eng. Phys., 36, 205, 10.1016/j.medengphy.2013.10.015 Boutry, 2018, A stretchable and biodegradable strain and pressure sensor for orthopaedic application, Nat. Electron., 1, 314, 10.1038/s41928-018-0071-7 Yang, 2019, Electronic skin: recent progress and future prospects for skin-attachable devices for health monitoring, Robot. Prosthet. Adv. Mater., 31 Meng, 2019, Flexible weaving constructed self-powered pressure sensor enabling continuous diagnosis of cardiovascular disease and measurement of cuffless blood pressure, Adv. Funct. Mater., 29, 10.1002/adfm.201806388 Lee, 2019, Parallel signal processing of a wireless pressure-sensing platform combined with machine-learning-based cognition, inspired by the human somatosensory system, Adv. Mater. Yang, 2019, Microstructured porous pyramid-based ultrahigh sensitive pressure sensor insensitive to strain and temperature, ACS Appl. Mater. Interfaces, 11, 19472, 10.1021/acsami.9b03261 Lai, 2019, In-process and in-use modulation of sensitivity and sensing range for CMOS-MEMS tactile sensor with dielectric PDMS nanocomposite, 2523 Zárate, 2019, Design of a bioinspired variable stiffness sensor, 376 Kumar, 2015, DSC measurements of the thermal properties of gallium particles in the micron and sub-micron sizes, obtained by sonication of molten gallium, J. Therm. Anal. Calorim., 119, 1587, 10.1007/s10973-015-4402-x Al-Shannaq, 2015, Supercooling elimination of phase change materials (PCMs) microcapsules, Energy, 87, 654, 10.1016/j.energy.2015.05.033 Zhang, 2020, Study on the nucleating agents for gallium to reduce its supercooling, Int. J. Heat Mass Tran., 148, 119055, 10.1016/j.ijheatmasstransfer.2019.119055 Wisse, 2006, Unusual tuning of mechanical properties of thermoplastic elastomers using supramolecular fillers, Macromolecules, 39, 7425, 10.1021/ma060986i Kim, 2015, Electroactive shape memory performance of polyurethane/graphene nanocomposites, React. Funct. Polym., 88, 1, 10.1016/j.reactfunctpolym.2015.01.004 Hu, 2018, Stretchable and magneto-sensitive strain sensor based on silver nanowire-polyurethane sponge enhanced magnetorheological elastomer, Mater. Des., 156, 528, 10.1016/j.matdes.2018.07.024 Sun, 2015, Development of a novel variable stiffness and damping magnetorheological fluid damper, Smart Mater. Struct., 24, 10.1088/0964-1726/24/8/085021 Yang, 2020, Flexible Actuators for Soft Robotics, Adv. Intell. Syst., 2, 10.1002/aisy.201900077 Jeong, 2015, Wireless optofluidic systems for programmable in vivo pharmacology and optogenetics, Cell, 162, 662, 10.1016/j.cell.2015.06.058 Park, 2014, Immunologic and tissue biocompatibility of flexible/stretchable electronics and optoelectronics, Adv. Healthc. Mater., 3, 515, 10.1002/adhm.201300220 Herbert, 2018, Soft material-enabled, flexible hybrid electronics for medicine, healthcare, and human-machine interfaces, Materials, 11, 187, 10.3390/ma11020187 Sun, 2009, Assessment of the biocompatibility of photosensitive polyimide for implantable medical device use, J. Biomed. Mater. Res., 90A, 648, 10.1002/jbm.a.32125 Yuk, 2019, Hydrogel bioelectronics, Chem. Soc. Rev., 48, 1642, 10.1039/C8CS00595H Mahapatro, 2020, Effect of polymer coating characteristics on the biodegradation and biocompatibility behavior of magnesium alloy, Polym. Plast. Technol. Mater., 59, 301, 10.1080/25740881.2019.1634728 Cherng, 2019, Hemocompatibility and adhesion of heparin/dopamine and heparin/collagen self-assembly multilayers coated on a titanium substrate, Appl. Surf. Sci., 463, 732, 10.1016/j.apsusc.2018.08.217 Kazem, 2018, Extreme toughening of soft materials with liquid metal, Adv. Mater., 30, 10.1002/adma.201706594 Zhu, 2013, Ultrastretchable fibers with metallic conductivity using a liquid metal alloy core, Adv. Funct. Mater., 23, 2308, 10.1002/adfm.201202405 Garcia-Sandoval, 2018, Chronic softening spinal cord stimulation arrays, J. Neural. Eng., 15, 10.1088/1741-2552/aab90d Kaursoin, 2007, Melt spun thermoresponsive shape memory fibers based on polyurethanes: effect of drawing and heat-setting on fiber morphology and properties, J. Appl. Polym. Sci., 103, 2172, 10.1002/app.25124 Dickey, 2008, Eutectic gallium-indium (EGaIn): a liquid metal alloy for the formation of stable structures in microchannels at room temperature, Adv. Funct. Mater., 18, 1097, 10.1002/adfm.200701216 Tutika, 2019, Liquid metal–elastomer soft composites with independently controllable and highly tunable droplet size and volume loading, ACS Appl. Mater. Interfaces, 11, 17873, 10.1021/acsami.9b04569 Jeong, 2016, Mechanically stretchable and electrically insulating thermal elastomer composite by liquid alloy droplet embedment, Sci. Rep., 5, 10.1038/srep18257 Lin, 2018, Sonication-enabled rapid production of stable liquid metal nanoparticles grafted with poly(1-octadecene- alt -maleic anhydride) in aqueous solutions, Nanoscale, 10, 19871, 10.1039/C8NR05600E Tang, 2018, Microfluidic mass production of stabilized and stealthy liquid metal nanoparticles, Small, 14, 10.1002/smll.201800118 Thelen, 2012, A study of the production and reversible stability of EGaIn liquid metal microspheres using flow focusing, Lab Chip, 12, 3961, 10.1039/c2lc40492c Tang, 2016, Liquid-metal microdroplets formed dynamically with electrical control of size and rate, Adv. Mater., 28, 604, 10.1002/adma.201503875