Material jetting additive manufacturing: An experimental study using designed metrological benchmarks

Yap, 2014, Compressive strength of thin-walled cellular core by inkjet-based additive manufacturing, 333

Yap, 2015, Shape recovery effect of 3D printed polymeric honeycomb, Virtual Phys Prototyp, 10, 91, 10.1080/17452759.2015.1060350

Sing, 2016, Laser and electron-beam powder-bed additive manufacturing of metallic implants: a review on processes, materials and designs, J Orthop Res, 34, 369, 10.1002/jor.23075

Yap, 2016, 3D printed bio-models for medical applications, Rapid Protot J, 23

Sun, 2016, Selective laser melting of stainless steel 316L with low porosity and high build rates, Mater Des, 104, 197, 10.1016/j.matdes.2016.05.035

Khoo, 2015, 3D printing of smart materials: a review on recent progresses in 4D printing, Virtual Phys Prototyp, 10, 103, 10.1080/17452759.2015.1097054

Ponche, 2014, A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process, Robot Comput Integr Manuf, 30, 389, 10.1016/j.rcim.2013.12.001

Liu, 2016, Guidelines for AM part consolidation, Virtual Phys Prototyp, 11, 133, 10.1080/17452759.2016.1175154

Kumke, 2016, A new methodological framework for design for additive manufacturing, Virtual Phys Prototyp, 11, 3, 10.1080/17452759.2016.1139377

Cooper, 2012, Additive manufacturing for product improvement at red bull technology, Mater Des, 41, 226, 10.1016/j.matdes.2012.05.017

Vayre, 2012, Designing for additive manufacturing, Procedia CIRP, 3, 632, 10.1016/j.procir.2012.07.108

Vayre, 2013, Identification on some design key parameters for additive manufacturing: application on electron beam melting, Procedia CIRP, 7, 264, 10.1016/j.procir.2013.05.045

Hague, 2004, Material and design considerations for rapid manufacturing, Int J Prod Res, 42, 4691, 10.1080/00207840410001733940

Mellor, 2014, Additive manufacturing: a framework for implementation, Int J Prod Econ, 149, 194, 10.1016/j.ijpe.2013.07.008

Adam, 2014, Design for additive manufacturing—element transitions and aggregated structures, CIRP J Manuf Sci Technol, 7, 20, 10.1016/j.cirpj.2013.10.001

Dikshit, 2017, Investigation of quasi-static indentation response of inkjet printed sandwich structures under various indenter geometries, Materials, 10, 10.3390/ma10030290

Yeong, 2005, Development of scaffolds for tissue engineering using a 3D inkjet model maker, Virtual Modelling and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping Proc 2nd Int Conf on Advanced Research in Virtual and Rapid Pro, 115

Chua, 2005, Rapid prototyping in tissue engineering: a state-of-the-art report, Virtual Model Rapid Manuf, 1, 9

Cazón, 2014, PolyJet technology for product prototyping: tensile strength and surface roughness properties, Proc Inst Mech Eng Part B: J Eng Manuf, 228, 1664, 10.1177/0954405413518515

Barclift, 2012, Examining variability in the mechanical properties of parts manufactured via polyjet direct 3d printing

Blanco, 2014, Nonisotropic experimental characterization of the relaxation modulus for PolyJet manufactured parts, J Mater Res, 29, 1876, 10.1557/jmr.2014.200

Ibrahim, 2009, Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy, J Cranio-Maxillo-Facial Surg, 37, 167, 10.1016/j.jcms.2008.10.008

Meisel, 2015, An investigation of key design for additive manufacturing constraints in multimaterial three-dimensional printing, J Mech Des, 137, 111406, 10.1115/1.4030991

Tibbits, 2014, 4D printing: multi-material shape change, Architl Des, 84, 116

Yu, 2015, Controlled sequential shape changing components by 3D printing of shape memory polymer multimaterials, Procedia IUTAM, 12, 193, 10.1016/j.piutam.2014.12.021

Sugavaneswaran, 2015, Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure, Mater Des, 66, 29, 10.1016/j.matdes.2014.10.029

Brooks, 2016, Design and evaluation of additively manufactured parts with three dimensional continuous fibre reinforcement, Mater Des, 90, 276, 10.1016/j.matdes.2015.10.123

Mueller, 2015, Mechanical properties of parts fabricated with inkjet 3D printing through efficient experimental design, Mater Des, 86, 902, 10.1016/j.matdes.2015.07.129

Cooke, 2010, Variability in the geometric accuracy of additively manufactured test parts, 1

Oh, 2008, A benchmark study on rapid prototyping processes and machines: quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost, Proc Inst Mech Eng Part B: J Eng Manuf, 222, 201, 10.1243/09544054JEM724

Ippolito, 1995, Benchmarking of rapid prototyping techniques in terms of dimensional accuracy and surface finish, CIRP Ann ManufTechnology\, 44, 157, 10.1016/S0007-8506(07)62296-3

Yang, 2017, Performance evaluation of ProJet multi-material jetting 3D printer, Virtual Phys Prototyp, 12, 95, 10.1080/17452759.2016.1242915

Kruth, 2005, Benchmarking of different sls/slm processes as rapid manufacturing techniques

Cavallini, 2009, Studying the repeatability in DMLS technology using a complete geometry test part

Fahad, 2012, A new benchmarking part for evaluating the accuracy and repeatability of Additive Manufacturing (AM) processes, 28

Mahesh, 2004, Benchmarking for comparative evaluation of RP systems and processes, Rapid Prototyp J, 10, 123, 10.1108/13552540410526999

Moylan, 2012, Proposal for a standardized test artifact for additive manufacturing machines and processes, Proceedings of the Solid Freeform Fabrication Symposium, 902

Yang, 2014, An investigation of standard test part design for additive manufacturing, Proceedings of the Solid Freeform Fabrication Symposium, 901

Ameta, 2015, Investigating the role of geometric dimensioning and tolerancing in additive manufacturing, J Mech Des, 137, 111401, 10.1115/1.4031296

Lee, 2016, Characterization and evaluation of 3D printed microfluidic chip for cell processing, Microfluid Nanofluid, 20, 1, 10.1007/s10404-015-1676-z

Seepersad CC, Govett T, Kim K, Lundin M, Pinero D. A Designer’s Guide for Dimensioning and Tolerancing SLS parts. p. 921-31.

Udroiu, 2009, Experimental determination of surface roughness of parts obtained by rapid prototyping, 283

Kumar, 2015, An experimental and theoretical investigation of surface roughness of poly-jet printed parts, Virtual Phys Prototyp, 10, 23, 10.1080/17452759.2014.999218

2016

Yap, 2014, Compressive strength of thin-walled cellular core by inkjet-based additive manufacturing, Proceedings of 1st International Conference on Progress in Additive Manufacturing, 333, 10.3850/978-981-09-0446-3_077

Meisel, 2015