Material Failure by Void Growth to Coalescence

Anderson, 1977, Analysis of a model for void growth and coalescence ahead of a moving crack tip, J. Mech. Phys. Solids, 25, 217, 10.1016/0022-5096(77)90024-2 Aoki, 1984, Effects of microvoids on crack blunting and initiation in ductile materials, Int. J. Fracture, 24, 267, 10.1007/BF00020741 Aravas, 1985, Microvoid growth and failure in the ligament between a hole and a blunt crack, Int. J. Fracture, 29, 21, 10.1007/BF00020674 Argon, 1982 Becker, 1986, Effect of yield surface curvature on necking and failure in porous plastic solids, J. Appl. Mech., 108, 491, 10.1115/1.3171801 Becker, 1987 Becker, 1987 Berg, 1970, Plastic dilatation and void interaction, 171 Bishop, 1951, A theory of the plastic distortion of a polycrystalline aggregate under combined stresses, Phil. Mag., 42, 414, 10.1080/14786445108561065 Brown, 1973, The initiation and growth of voids at second phase particles, 164 Budiansky, 1969, Remarks on theories of solid and structural mechanics Budiansky, 1982, Void growth and collapse in viscous solids, 13 Chu, 1980, Void nucleation effects in biaxially stretched sheets, J. Eng. Materials Technol., 102, 249, 10.1115/1.3224807 Cialone, 1980, Hydrogen assisted fracture of spheroidized plain carbon steels, Met. Trans., 12A, 1373 Cocks, 1982, On creep fracture by void growth, Prog. Materiuls Science, 27, 189, 10.1016/0079-6425(82)90001-9 Cocks, 1987, Creep constitutive equations for damaged materials, Adv. Appl. Mech., 25, 239, 10.1016/S0065-2156(08)70279-5 Cottrell, 1958, Theory of brittle fracture in steel and similar metals, Transactions AIME, 212, 192 Cox, 1974, An investigation of the plastic fracture of AISI 4340 and 18 nickel-200 grade maraging steels, Mer. Trans., 5, 1457, 10.1007/BF02646633 Dafalias, 1983, Corotational rates for kinematic hardening at large plastic deformations, J. Appl. Mech., 50, 561, 10.1115/1.3167091 Doraivelu, 1984, A new yield function for compressible P/M materials, Int. J. Mech. Sci., 26, 527, 10.1016/0020-7403(84)90006-7 Dyson, 1976, Constraints on diffusional cavity growth rates, Metal Science, 10, 349, 10.1179/030634576790431417 Dyson, 1983, Continuous cavity nucleation and creep fracture, Scripta Metall., 17, 31, 10.1016/0036-9748(83)90065-0 Frost, 1982 Goods, 1979, The nucleation of cavities by plastic deformation, Acta Metall., 27, 1, 10.1016/0001-6160(79)90051-8 Green, 1968 Guennouni, 1987, Constitutive equations for rigid plastic or viscoplastic materials containing voids, Fatigue Fract. Engng. Mater. Struct., 10, 399, 10.1111/j.1460-2695.1987.tb00489.x Gurson, 1977, Continuum theory of ductile rupture by void nucleation and growth–I. Yield criteria and flow rules for porous ductile media, J. Engng. Materials Technol., 99, 2, 10.1115/1.3443401 Gurson, 1977, Porous rigid-plastic materials containing rigid inclusions–Yield function, plastic potential, and void nucleation, 2A, 357 Hadamard, 1903 Hahn, 1984, The influence of microstructure on brittle fracture toughness, Met. Trans., 15A, 947, 10.1007/BF02644685 Hahn, 1975, Metallurgical factors affecting fracture toughness of aluminum alloys, Met. Trans., 6A, 653, 10.1007/BF02672285 Hancock, 1982, Plasticity of porous metals, 69 Hancock, 1983, On the role of strain and stress state in ductile failure, J. Mech. Phys. Solids, 31, 1, 10.1016/0022-5096(83)90017-0 Hancock, 1976, On the mechanisms of ductile failure in high strength steels subjected to multiaxial stress-states, J. Mech. Phys. Solids, 24, 147, 10.1016/0022-5096(76)90024-7 He, 1981, The penny-shaped crack and the plane strain crack in an infinite body of power-law material, J. Appl. Mech., 48, 830, 10.1115/1.3157742 Hill, 1962, Acceleration waves in solids, J. Mech. Phys. Solids, 10, 1, 10.1016/0022-5096(62)90024-8 Hull, 1959, The growth of grain-boundary voids under stress, Phil. Mag., 4, 673, 10.1080/14786435908243264 Hutchinson, 1973, Finite strain analysis of elastic-plastic solids and structures, 17 Hutchinson, 1983, Constitutive behaviour and crack tip fields for materials undergoing creep-constrained grain boundary cavitation, Acta Metall., 31, 1079, 10.1016/0001-6160(83)90204-3 Hutchinson, 1980, Surface instabilities on statically strained plastic solids, Int. J. Mech. Sci., 22, 339, 10.1016/0020-7403(80)90051-X Hutchinson, 1981, Shear band formation in plane strain, Int. J. Solids Structures., 17, 451, 10.1016/0020-7683(81)90053-6 Hutchinson, 1987 Koplik, 1987 Lee, 1983, Stress analysis for kinematic hardening in finite-deformation plasticity, J. Appl. Mech., 50, 554, 10.1115/1.3167090 Li, 1988 Magnusen, 1987 Marciniak, 1967, Limit strains in the process of stretch forming sheet metals, Int. J. Mech. Sci., 9, 609, 10.1016/0020-7403(67)90066-5 McClintock, 1968, A criterion for ductile fracture by growth of holes, J. Appl. Mech., 35, 363, 10.1115/1.3601204 McMeeking, 1977, Finite deformation analysis of crack tip opening in elastic-plastic materials and implications for fracture initiation, J. Mech. Phys. Solid, 25, 357, 10.1016/0022-5096(77)90003-5 Mear, 1985, Influence of yield surface curvature on flow localization in dilatant plasticity, Mech. Materials, 4, 395, 10.1016/0167-6636(85)90035-3 Moussy, 1985, Les differentes echelles du developpement de l'endommagement dans del aciers. Influence sur la localization de la deformation a l'echelle microscopique, 263 Needleman, 1972, Void growth in an elastic-plastic medium, J. Appl. Mech., 41, 964, 10.1115/1.3422899 Needleman, 1987 Needleman, 1978, Limits to ductility set by plastic flow localization, 237 Needleman, 1980, Plastic creep flow effects in the diffusive cavitation of grain boundaries, Acta Metall., 28, 1315, 10.1016/0001-6160(80)90001-2 Needleman, 1984, An analysis of ductile rupture in notched bars, J. Mech. Phys. Solids, 32, 461, 10.1016/0022-5096(84)90031-0 Needleman, 1984, Finite element analysis of localization in plasticity, V, 94 Needleman, 1984, Limits to formability in rate-sensitive metal sheets, 51 Needleman, 1987, An analysis of ductile rupture modes at a crack tip, J. Mech. Phys. Solids, 35, 151, 10.1016/0022-5096(87)90034-2 Nemat-Nasser, 1977, Model studies of ductile fracture, 387 Nemat-Nasser, 1980, Unstable growth of tension cracks in brittle solids: Stable and unstable bifurcations, snap-through, and imperfection sensitivity, Int. J. Solids Structures, 16, 1017, 10.1016/0020-7683(80)90102-X Norris, 1979, Computer simulation of the Charpy V-notch toughness test, Engineering Frucrure Mechanics, 11, 261, 10.1016/0013-7944(79)90003-1 Nutt, 1987, Void nucleation at fiber ends in Al-SiC composites, Scripta Metallurgica, 21, 705, 10.1016/0036-9748(87)90389-9 Pan, 1983, Localization of deformation in rate sensitive porous plastic solids, Int. J. Fracture, 21, 261, 10.1007/BF00942345 Paris, 1979, Initial experimental investigation of tearing instability theory Peirce, 1984, A tangent modulus method for rate dependent solids, Compur. Struct., 18, 875, 10.1016/0045-7949(84)90033-6 Petch, 1958, The ductile-brittle transition in the fracture of α-iron, I. Phil. Mag., 3, 1089, 10.1080/14786435808237038 Puttick, 1960, Ductile fracture in metals, Phil. Mag., 4, 964, 10.1080/14786435908238272 Rice, 1976, Elastic-plastic fracture mechanics, 23 Rice, 1977, The localization of plastic deformation, 207 Rice, 1981, Constraints on the diffusive cavitation of isolated grain boundary facets in creeping polycrystals, Acta Metall., 29, 675, 10.1016/0001-6160(81)90150-4 Rice, 1970, The role of large crack tip geometry changes in plane strain fracture, 641 Rice, 1969, On the ductile enlargement of voids in triaxial stress fields, J. Mech. Phys. Solids, 17, 201, 10.1016/0022-5096(69)90033-7 Riedel, 1986 Ritchie, 1973, On the relationship between critical tensile stress and fracture toughness in mild steel, J. Mech. Phys. Solids, 21, 395, 10.1016/0022-5096(73)90008-2 Rolfe, 1977 Rudnicki, 1975, Conditions for the localization of deformation in pressure-sensitive dilatant materials, J. Mech. Phys. Solids, 23, 371, 10.1016/0022-5096(75)90001-0 Saje, 1982, Void nucleation effects on shear localization in porous plastic solids, Int. J. Fracture, 19, 163, 10.1007/BF00017128 Sham, 1983, Effects of triaxial stressing on creep cavitation of grain boundaries, Acta Metall., 31, 919, 10.1016/0001-6160(83)90120-7 Shima, 1976, Plasticity theory for porous metals, Int. J. Mech. Sci., 18, 285, 10.1016/0020-7403(76)90030-8 Smith, 1968, Cleavage fracture in mild steel, Int. J. Fracture Mechanics, 4, 131, 10.1007/BF00188940 Speich, 1982, Effect of volume fraction and shape of sulfide inclusions on through-thickness ductility and impact energy of high-strength 4340 plate steels, Met. Trans., 13A, 2239, 10.1007/BF02648395 Stone, 1975, Discussion of Metallurgical factors affecting fracture toughness of aluminum alloys, Met. Trans., 6A, 668, 10.1007/BF02672286 Tvergaard, 1978, Effect of kinematic hardening on localized necking in biaxially stretched sheets, Int. J. Mech. Sci., 20, 651, 10.1016/0020-7403(78)90023-1 Tvergaard, 1981, Influence of voids on shear band instabilities under plane strain conditions, Int. J. Fracture, 17, 389, 10.1007/BF00036191 Tvergaard, 1982, On localization in ductile materials containing spherical voids, Int. J. Fracture, 18, 237, 10.1007/BF00015686 Tvergaard, 1982, Ductile fracture by cavity nucleation between larger voids, J. Mech. Phys. Solids, 30, 265, 10.1016/0022-5096(82)90033-3 Tvergaard, 1982, Material failure by void coalescence in localized shear bands, Int. J. Solids Structures, 18, 659, 10.1016/0020-7683(82)90046-4 Tvergaard, 1982, Influence of void nucleation on ductile shear fracture at a free surface, J. Mech. Phys. Solids, 30, 399, 10.1016/0022-5096(82)90025-4 Tvergaard, 1984, On the creep constrained ditksive cavitation of grain boundary facets, J. Mech. Phys. Solids, 32, 373, 10.1016/0022-5096(84)90021-8 Tvergaard, 1984, Constitutive relations for creep in polycrystals with grain boundary cavitation, Acta Metall., 32, 1977, 10.1016/0001-6160(84)90178-0 Tvergaard, 1985, Effect of grain boundary sliding on creep constrained diffusive cavitation, J. Mech. Phys. Solids, 33, 447, 10.1016/0022-5096(85)90009-2 Tvergaard, 1986, Analysis of creep crack growth by grain boundary cavitation, Int. J. Fracture, 31, 183, 10.1007/BF00018927 Tvergaard, 1987, Effect of yield surface curvature and void nucleation on plastic flow localization, J. Mech. Phys. Solids, 35, 43, 10.1016/0022-5096(87)90027-5 Tvergaard, 1987, Ductile shear fracture at the surface of a bent specimen, Mech. Materials, 6, 53, 10.1016/0167-6636(87)90022-6 Tvergaard, 1987 Tvergaard, 1987 Tvergaard, 1988 Tvergaard, 1984, Analysis of the cup-cone fracture in a round tensile bar, Acta Metall., 32, 157, 10.1016/0001-6160(84)90213-X Tvergaard, 1986, Effect of material rate sensitivity on failure modes in the Charpy V-notch test, J. Mech. Phys. Solids, 34, 213, 10.1016/0022-5096(86)90019-0 Tvergaard, 1987 Tvergaard, 1981, Flow localization in the plane strain tensile test, J. Mech. Phys. Solids, 29, 115, 10.1016/0022-5096(81)90019-3 Yamamoto, 1978, Conditions for shear localization in the ductile fracture of void-containing materials, Int. J. Fracture, 14, 347, 10.1007/BF00015989 Ziegler, 1959, A modification of Prager's hardening rule, Quart. Appl. Math., 17, 55, 10.1090/qam/104405