Marginal fit and microleakage of cast and metal laser sintered copings—An in vitro study

Stephen, 2008 Gemalmaz, 1995, Marginal fit changes during porcelain firing cycles, J Prosthet Dent, 73, 49, 10.1016/S0022-3913(05)80272-0 Anusavice, 2003 White, 1992, Microleakage of a new crown and fixed partial denture luting agent, J Prosthet Dent, 67, 156, 10.1016/0022-3913(92)90447-I Kim, 2013, An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system, Dent Mater, July (29), e91, 10.1016/j.dental.2013.04.007 Wu, 2007, A modified one-step putty-wash impression technique, J Prosthet Dent, 98, 245, 10.1016/S0022-3913(07)60063-8 Schmid-Schwap, 2011, Microleakage after thermocycling of cemented crowns – a meta-analysis, Dent Mater, 27, 855, 10.1016/j.dental.2011.05.002 Soriani, 2007, Effect of the use of die spacer on the marginal fit of copings cast in NiCr, NiCrBe and commercially pure titanium, Braz Dent J, 18, 225, 10.1590/S0103-64402007000300009 Jahangiri, 2005, Assessment of sensitivity and specificity of clinical evaluation of cast restoration marginal accuracy compared to stereomicroscopy, J Prosthet Dent, 93, 138, 10.1016/j.prosdent.2004.11.007 John, 1990, A standardized method of determination of crown margin fidelity, J Prosthet Dent, 64, 18, 10.1016/0022-3913(90)90147-5 Piemjai, 2001, Effect of seating force, margin design and cement on marginal seal and retention of complete metal crowns, Int J Prosthodont, 14, 412 Gale, 1999, Thermal cycling procedures for laboratory testing of dental restorations, J Dent, 27, 89, 10.1016/S0300-5712(98)00037-2 Crim, 1985, Comparison of four thermocycling techniques, J Prosthet Dent, 53, 50, 10.1016/0022-3913(85)90064-2 Tjan, 1992, Marginal leakage of cast gold crowns luted with an adhesive resin cement, J Prosthet Dent, 67, 11, 10.1016/0022-3913(92)90039-D Bindl, 2005, Marginal and internal fit of all-ceramic CAD/CAM crown copings on chamfer preparations, J Oral Rehabil, 32, 441, 10.1111/j.1365-2842.2005.01446.x Valderhaug, 1976, Periodontal conditions in patients 5 years following insertion of fixed prostheses. Pocket depth and loss of attachment, J Oral Rehabil, 3, 237, 10.1111/j.1365-2842.1976.tb00949.x Valderhaug, 1977, Oral hygiene in a group of supervised patients with fixed prostheses, J Periodontol, 48, 221, 10.1902/jop.1977.48.4.221 Lang, 1983, Clinical and microbiological effects of subgingival restorations with overhanging or clinically perfect margins, J Clin Periodontol, 10, 563, 10.1111/j.1600-051X.1983.tb01295.x Foster, 1990, Failed conventional bridge work from general dental practice: clinical aspects and treatment needs of 142 cases, Br Dent J, 168, 199, 10.1038/sj.bdj.4807133 Hung, 1990, Marginal fit of porcelain fused to metal and 2 types of ceramic crowns, J Prosthet Dent, 63, 26, 10.1016/0022-3913(90)90260-J Shiratsuchi, 2006, Influence of finish line design on marginal adaptation of electroformed metal–ceramic crowns, J Prosthet Dent, 95, 237, 10.1016/j.prosdent.2006.01.009 Wu, 2007, The use of vacuum-formed resin sheets as spacers for putty-wash impressions, J Prosthet Dent, 97, 54, 10.1016/j.prosdent.2006.11.008 Monzavi, 2005, Use of wax spacers for putty-wash impression of implant snapon impression copings, J Prosthet Dent, 93, 494, 10.1016/j.prosdent.2005.03.003 Crim, 1987, Microleakage: the effect of storage and cycling duration, J Prosthet Dent, 57, 574, 10.1016/0022-3913(87)90339-8 Christensen, 1966, Marginal fit of gold inlay castings, J Prosthet Dent, 16, 297, 10.1016/0022-3913(66)90082-5 Gavelis, 1981, The effects of various finish line preparations of the marginal seal and occlusal seat of full crown preparations, J Prosthet Dent, 45, 138, 10.1016/0022-3913(81)90330-9 Fransson, 1985, The fit of metal–ceramic crowns. A clinical study, Dent Mater, 1, 169, 10.1016/S0109-5641(85)80019-1 Valderrama, 1995, A comparison of the marginal and internal adaptation of titanium and gold–platinum–palladium metal ceramic crowns, Int J Prosthodont, 8, 29