Marginal adaptation of CAD/CAM zirconia-based crown during fabrication steps

Maritilo, 2008, The firing procedure influences properties of a zirconia core ceramic, Dent Mater, 24, 471, 10.1016/j.dental.2007.04.008 Bindl, 2003, Clinical and SEM evaluation of all-ceramic chair-side CAD/CAM generated partial crowns, Eur J Oral Sci, 111, 163, 10.1034/j.1600-0722.2003.00022.x Goldin, 2005, Marginal fit of leucite–glass pressable ceramic restorations and ceramic pressed-to-metal restorations, J Prosthet Dent, 93, 143, 10.1016/j.prosdent.2004.10.023 Gonzalo, 2009, A comparison of the marginal vertical discrepancies of zirconium and metal ceramic posterior fixed dental prostheses before and after cementation, J Prosthet Dent, 102, 378, 10.1016/S0022-3913(09)60198-0 Komine, 2007, Marginal and internal adaptation of zirconium dioxide ceramic copings and crowns with different finish line designs, Dent Mater, 26, 659, 10.4012/dmj.26.659 Att, 2009, Marginal adaptation of three different zirconium dioxide three-unit fixed dental prostheses, J Prosthet Dent, 101, 239, 10.1016/S0022-3913(09)60047-0 Beschnidt, 1999, Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth, J Oral Rehabil, 26, 582, 10.1046/j.1365-2842.1999.00449.x Sundar, 2007, Cercon® zirconia: conservative options in metal-free dentistry, Clin Man Degudent Gmbh Beuer, 2010, Marginal and internal fit of zirconia based fixed dental prostheses fabricated with different concepts, Clin Cosm Invest Dent, 2, 5, 10.2147/CCIDEN.S6691 2006, 8 Braunwarth, 2006, 1 Beuer, 2008, Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system, Dent Mater, 27, 820 Sibel, 2006, Surface protection for newly erupting first molars, Compend Contin Educ Dent, 27, 46 Krejci, 1993, Marginal adaptation and fit of adhesive ceramic inlays, Dent J, 21, 39, 10.1016/0300-5712(93)90048-U García, 2011, Marginal adaptation and microleakage comparison between two zirconia oxide systems with the same cement, Rev Odontológica Mex, 15, 101 Beuer, 2009, Influence of preparation angle on marginal and internal fit of CAD/CAM – fabricated zirconia crown copings, Quintessence Int J, 40, 243 Balkaya, 2005, Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems, J Prosthet Dent, 93, 346, 10.1016/j.prosdent.2005.02.003 Limkangwalmongkol, 2009, Comparison of marginal fit between all-porcelain margin versus alumina-supported margin on procera alumina crowns, J Prosthodont ACP, 18, 162, 10.1111/j.1532-849X.2008.00396.x Rastogi, 2011, Comparative analysis of the clinical techniques used in evaluation of marginal accuracy of cast restoration using stereomicroscopy as gold, J Adv Prosthodont, 3, 69, 10.4047/jap.2011.3.2.69 Groten, 2000, Determination of the minimum number of marginal gap measurements required for practical in-vitro testing, J Prosthet Dent, 83, 40, 10.1016/S0022-3913(00)70087-4 Christensen, 1966, Marginal fit of gold inlay castings, J Prosthet Dent, 16, 297, 10.1016/0022-3913(66)90082-5 Mclean, 1989, The estimation of cement film thickness by an in vivo technique, Br Dent J, 131, 107, 10.1038/sj.bdj.4802708 Karataşli, 2011, Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems, Dent Mater, 30, 97, 10.4012/dmj.2010-063 Chan, 1989, Scanning electron microscopic studies of the marginal fit of three esthetic crowns, Quintessence Int J, 20, 189 Kuni, 2007, Effect of sintering on the marginal and internal fit of CAD/CAM-fabricated zirconia frameworks, Dent Mater, 26, 820, 10.4012/dmj.26.820 Quintas, 2004, Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and luting agents: an in vitro evaluation, J Prosthet Dent, 92, 250, 10.1016/j.prosdent.2004.06.023 Baig, 2010, Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system, J Prosthet Dent, 104, 216, 10.1016/S0022-3913(10)60128-X Farid, 2012, In vitro evaluation of the effect of core thickness and fabrication stages on the marginal accuracy of an all-ceramic system, Dent J, 9, 188 Kohorst, 2010, Influence of the veneering process on the marginal fit of zirconia fixed dental prostheses, J Oral Rehabil, 37, 283, 10.1111/j.1365-2842.2009.02053.x Dehoff, 2008, Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries, Dent Mater, 24, 744, 10.1016/j.dental.2007.08.008 Kim, 2009, The effect of low temperature aging on the mechanical property & phase stability of Y-TZP ceramics, J Adv Prosthodont, 1, 113, 10.4047/jap.2009.1.3.113 Elshazly, 2011, Yttria tetragonal zirconia biomaterials: kinetic investigation, J Mater Sci Technol, 27, 332, 10.1016/S1005-0302(11)60070-4 Sulaiman, 1997, A comparison of the marginal fit of in-ceram, IPS empress, and procera crowns, Int J Prosthodont, 10, 478 Vigolo, 2008, An in vitro evaluation of fit of zirconium-Oxide-based ceramic four-unit fixed partial dentures, generated with three different CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles, J Prosthodont ACP, 17, 621, 10.1111/j.1532-849X.2008.00366.x Dittmer, 2009, Stresses and distortions within zirconia-fixed dental prostheses due to the veneering process, Acta Biomater J, 5, 3231, 10.1016/j.actbio.2009.04.025 Pilathadka, 2008, Precision of marginal adaptation of the incisor and molar Procera® all-ceram crown copings, Prague Med Rep, 109, 71 Bhowmik, 2011, A comparison of marginal fit of glass infiltrated alumina copings fabricated using two different techniques and the effect of firing cycles over them, J Adv Prosthodont, 3, 196, 10.4047/jap.2011.3.4.196 Blatz, 2008, Influence of cementation technique on fracture strength and leakage of alumina all-ceramic crowns after cyclic loading, Quintessence Int J, 39, 23 Perdigão, 2012, Degradation of dental Zro2-based materials after hydrothermal fatigue. Part I: XRD, XRF, and FESEM analyses, Dent Mater, 31, 256, 10.4012/dmj.2011-216 Kim, 2010, Concerns of hydrothermal degradation in CAD/CAM zirconia, J Dent Res, 89, 91, 10.1177/0022034509354193 Albert, 2004, Marginal adaptation and microleakage of procera all-ceram crowns with four cements, Int J Prosthodont, 17, 529 Stappert, 2004, Marginal adaptation of three-unit fixed partial dentures constructed from pressed ceramic systems, Br Dent J, 196, 766, 10.1038/sj.bdj.4811390 Kohorst, 2009, Marginal accuracy of four-unit zirconia fixed dental prostheses fabricated using different computer aided design/computer-aided manufacturing systems, Eur J Oral Sci, 117, 319, 10.1111/j.1600-0722.2009.00622.x Rossetti, 2008, Correlation between margin fit and microleakage in complete crowns cemented with three luting agents, J Appl Oral Sci, 16, 64, 10.1590/S1678-77572008000100013