Mapping of quench front propagation in a heated cylindrical particle bed – MONET tests

Atkhen, 2006, SILFIDE experiment: coolability in a volumetrically heated debris bed, Nucl. Eng. Des., 236, 2126, 10.1016/j.nucengdes.2006.03.061 Bachrata, A., Fichot, F., Repetto, G., Fleurot, J., Quintard, M., 2011. Quench front progression in a superheated porous medium: experimental analysis and model development (NURETH14), Toronto, Canada, September 25–29. Bachrata, 2013, Quench front progression in a superheated porous medium: experimental analysis and model development, J. Energy Power Eng., 7, 514 Bang, 2018, Experiment and modeling of jet breakup in fuel-coolant interactions, Ann. Nucl. Energy, 118, 336, 10.1016/j.anucene.2018.04.033 Broughton, 1989, A scenario of the Three Mile Island unit 2 accident, Nucl. Technol., 87, 34, 10.13182/NT89-A27637 Bürger, 2006, Validation and application of the WABE code: Investigations of constitutive laws and 2D effects on debris coolability, Nucl. Eng. Des., 236, 2164, 10.1016/j.nucengdes.2006.03.058 Bürger, 2010, Coolability of particulate beds in severe accidents: Status and remaining uncertainties, Prog. Nucl. Energy, 52, 61, 10.1016/j.pnucene.2009.09.015 Chen, 2020, Development and application of a surrogate model for quick estimation of ex-vessel debris bed coolability, Nucl. Eng. Des., 370, 10.1016/j.nucengdes.2020.110898 Chen, 2022, Coupled MELCOR/COCOMO analysis on quench of ex-vessel debris beds, Ann. Nucl. Energy, 165, 10.1016/j.anucene.2021.108643 Chikhi, N., Garcin, T., Foubert, F., 2016. First experimental results of large scale debris bed reflood tests in the PEARL facility. Proceeding NURETH-16 N13824, Chicago, USA. Chikhi, 2017, Experimental and theoretical study of large scale debris bed reflood inthe PEARL facility, Nucl. Eng. Des., 312, 48, 10.1016/j.nucengdes.2016.05.009 Cho, 1983, Formation of dry pockets during water penetration into a hot particle bed, Trans. ANS, 41, 418 Cho, 1984, On the pattern of water penetration into a hot particle bed, Nucl. Technol., 65, 23, 10.13182/NT84-A33369 Ergun, 1952, Fluid flow through packed columns, J. Chem. Eng. Progress, 48, 89 Fichot, 2006, The impact of thermal non-equilibrium and large-scale 2D/3D effects on debris bed reflooding and coolability, Nucl. Eng. Des., 236, 2144, 10.1016/j.nucengdes.2006.03.059 Fichot, 2012, Quenching of a highly superheated porous medium by injection of water, J. Phys. Conf. Ser., 395 Ginsberg, T., Klein, J., Klages, J., Sanborn, Y., Schwarz, C.E., Chen, J.C., Wie, L., 1986. An experimental and analytical investigation of quenching of superheated debris beds under top reflood conditions. Report NUREG/CR-4493. Hofmann, 1984, On the location and mechanisms of dryout in top-fed and bottom-fed particulate beds, Nucl. Tech., 65, 36, 10.13182/NT84-A33371 Hu, 1991, On the measurement and mechanism of dry-out in volumetrically heated coarse particle, Int. J. of Multiphase Flow, 17, 519, 10.1016/0301-9322(91)90047-7 Huang, 2018, Numerical investigation on quench of an ex-vessel debris bed at prototypical scale, Ann. Nucl. Energy, 47, 10.1016/j.anucene.2018.08.018 Huang, 2019, On the quench of a debris bed in the lower head of a Nordic BWR by coolant injection through control rod guide tubes, Nucl. Eng. Des., 351, 189, 10.1016/j.nucengdes.2019.06.001 Journeau, 2006, The VULCANO VE-U7 Corium spreading benchmark, Prog. Nucl. Energy, 48, 215, 10.1016/j.pnucene.2005.09.009 Jung, 2020, Minimum diameter limit of particle size distribution and its effect on coolability of debris bed, Nucl. Eng. Des., 363, 10.1016/j.nucengdes.2020.110606 Karbojian, 2009, A scoping study of debris bed formation in the DEFOR test facility, Nucl. Eng. Des., 239, 1653, 10.1016/j.nucengdes.2009.03.002 Kim, 2016, Development of an ex-vessel corium debris bed with two-phase natural convection in a flooded cavity, Nucl. Eng. Des., 298, 240, 10.1016/j.nucengdes.2015.12.028 Kim, 2017, Thermophysical properties of liquid UO2, ZrO2 and corium by molecular dynamics and predictive models, J. Nucl. Mater., 491, 126, 10.1016/j.jnucmat.2017.04.030 Konovalikhin, 2001 Kudinov, 2013, Agglomeration and size distribution of debris in DEFOR-A experiments with Bi2O3–WO3 corium simulant melt, Nucl. Eng. Des., 263, 284, 10.1016/j.nucengdes.2013.06.011 Leininger, 2014, Experimental investigation on reflooding of debris beds, Ann. of Nuclear Energy, 74, 42, 10.1016/j.anucene.2014.07.007 Li, 2012, An experimental study on pressure drop and dryout heat flux of two-phase flow, Nucl. Eng. Des., 242, 369, 10.1016/j.nucengdes.2011.11.006 Lindholm, 2006, Dryout heat flux experiments with deep heterogeneous particle bed, Nuclear Eng. Des., 236, 2060, 10.1016/j.nucengdes.2006.03.036 Lipinski, R.J., 1982. A model for boiling and dryout in particle beds. sandia national laboratories. SAND 82-9765, NUREG/CR-2646. Magallon, 1999, Lessons learnt from FARO/TERMOS corium melt quenching experiments, Nucl. Eng. Des., 189, 223, 10.1016/S0029-5493(98)00274-X Miyazaki, 1986, Dryout heat flux for core debris bed, (I) effects of system pressure and particle size, J. Nucl. Sci. Technol., 23, 702, 10.1080/18811248.1986.9735043 Modak, M., Nirgude, V., Park, H. S., Description of the MONET test facility to study quenching of porous bed, Transactions of the KNS Autumn Virtual Meeting 2021, October 20-22. Modak, M., Nirgude, V., Park, H. S., 2022. Quench Front Movement in Cylindrical Debris Bed –Monet Tests, 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12), Miyazaki, Japan, October 30 - November 2, 2022. Modak, M., Nirgude, V., Park, H. S., 2022. Quenching Phenomena in High Temperature Conical Debris Bed: MONET Tests, The 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19), Brussels, Belgium, March 6 – 11. Modak, M., Nirgude, V., Park, H. S., 2022. Quenching Phenomena in High Temperature Cylindrical Debris Bed: MONET Tests, The 10th European Review Meeting on Severe Accident Research (ERMSAR2022). Akademiehotel, Karlsruhe, Germany, May 16-19. Nayak, 2006, An experimental study on quenching of a radially stratified heated porous bed, Nuc. Eng. Des., 236, 2189, 10.1016/j.nucengdes.2006.03.057 Rahman, 2013 Rashid, 2011, Experimental results on the coolability of a debris bed with multidimensional cooling effects, Nucl. Eng. Des., 241, 4357, 10.1016/j.nucengdes.2010.11.023 Rashid, 2012, Experimental results on the coolability of a debris bed with down comer configurations, Nucl. Eng. Des., 249, 104, 10.1016/j.nucengdes.2011.08.055 Reed, 1982 Repetto, 2013, Experimental program on debris reflooding (PEARL) – Results on PRELUDE facility, Nucl. Eng. Des., 264, 176, 10.1016/j.nucengdes.2012.11.024 Schafer, 2006, Basic Investigations on Debris Cooling, Nucl. Eng. Des., 236, 2104, 10.1016/j.nucengdes.2006.03.033 Schulenberg, T., Müller, U., 1986. A refined model for the coolability of core debris with flow entry from the bottom, Proceedings of the Sixth Information Exchange Meeting on Debris Coolability. University of California, Los Angeles, EPRI NP-4455. Spencer, B.W., Wang, K., Blomquist, C.A., McUmber, L.M., Schneider, J.P., 1994. Fragmentation and quench behavior of corium melt streams in water (No. NUREG/CR-6133; ANL-93/32). Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Research; Argonne National Lab., IL (United States). Takasuo, 2011, The effect of lateral flooding on the coolability of irregular core debris beds, Nucl. Eng. Des., 241, 1196, 10.1016/j.nucengdes.2010.04.033 Takasuo, 2012, The COOLOCE experiments investigating the dryout power in debris beds of heap-like and cylindrical geometries, Nucl. Eng. Des., 250, 687, 10.1016/j.nucengdes.2012.06.015 Thakre, 2014, An experimental study on coolability of a particulate bed with radial stratification or triangular shape, Nuc. Eng. Des., 276, 54, 10.1016/j.nucengdes.2014.04.039 Tung, 1987, Quenching of debris beds having variable permeability in the axial and radial directions, Nucl. Eng. Des., 99, 275, 10.1016/0029-5493(87)90127-0 Tutu, N.K., Ginsberg, T., Klein, J., Klages, J., Schwarz, C.E., 1984. Debris bed quenching under bottom flood conditions. Brookhaven National Laboratory, NUREG/CR-3850, BNL-NUREG-51788. Yakush, S.E., Kudinov, P., 2011. Effects of Water Pool Subcooling on the Debris Bed Spreading by Coolant Flow. In: Proceedings of ICAPP ‘11, Nice France, Paper 11416. Yakush, S.E., Kudinov, P., Dinh, T.-N., 2009. Multiscale simulations of self- organization in the formation and coolability of corium debris bed. In: 13th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-13), Kanazawa City Japan, Paper N13P1143. Yakush, 2013, Coolability of heat-releasing debris bed. Part 2: Uncertainty of dryout heat flux, Ann. Nucl. Energy, 52, 72, 10.1016/j.anucene.2012.10.012