Manufacturing Methods, Microstructural and Mechanical Properties Evolutions of High-Entropy Alloys: A Review
Tóm tắt
Từ khóa
Tài liệu tham khảo
D.B. Miracle, J.D. Miller, O.N. Senkov, C. Woodward, M.D. Uchic, J. Tiley, Exploration and development of high entropy alloys for structural applications. Entropy 16(1), 494–525 (2014)
Y. J. Huang, K.H. Chen, Master’s Thesis, Natl. Tsing Hua Univ. (1996)
J. Yeh et al., Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv. Eng. Mater. 6(5), 299–303 (2004)
C.-Y. Hsu, J.-W. Yeh, S.-K. Chen, T.-T. Shun, Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl 0.5 Fe alloy with boron addition. Metall. Mater. Trans. A 35(5), 1465–1469 (2004)
J. Chen et al., A review on fundamental of high entropy alloys with promising high–temperature properties. J. Alloys Compd. 760, 15–30 (2018)
T. Bhattacharjee et al., Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy. Mater. Chem. Phys. 210, 207–212 (2018)
Y.F. Ye, Q. Wang, J. Lu, C.T. Liu, Y. Yang, High-entropy alloy: challenges and prospects. Mater. Today 19(6), 349–362 (2016)
P.F. Yu et al., The high-entropy alloys with high hardness and soft magnetic property prepared by mechanical alloying and high-pressure sintering. Intermetallics 70, 82–87 (2016)
Y.Y.Y. Chen, T. Duval, U.D.D. Hung, J.W.W. Yeh, H.C.C. Shih, Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel. Corros. Sci. 47(9), 2257–2279 (2005)
L.J.J. Zhang et al., The microstructural evolution and hardness of the equiatomic CoCrCuFeNi high-entropy alloy in the semi-solid state. J. Alloys Compd. 745, 75–83 (2018)
W. Huo et al., Ultrahigh hardness and high electrical resistivity in nano-twinned, nanocrystalline high-entropy alloy films. Appl. Surf. Sci. 439, 222–225 (2018)
G. Jin et al., High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating. Appl. Surf. Sci. 445, 113–122 (2018)
C. Shang, E. Axinte, W. Ge, Z. Zhang, Y. Wang, High-entropy alloy coatings with excellent mechanical, corrosion resistance and magnetic properties prepared by mechanical alloying and hot pressing sintering. Surfaces Interfaces 9, 36–43 (2017)
K.V. Yusenko et al., High-pressure high-temperature tailoring of High Entropy Alloys for extreme environments. J. Alloys Compd. 738, 491–500 (2018)
M.D.D. Cropper, Thin films of AlCrFeCoNiCu high-entropy alloy by pulsed laser deposition. Appl. Surf. Sci. 455(May), 153–159 (2018)
S. Mohanty et al., Powder metallurgical processing of equiatomic AlCoCrFeNi high entropy alloy: microstructure and mechanical properties. Mater. Sci. Eng. A 679, 299–313 (2017)
X.W. Qiu, Y.P. Zhang, L. He, C.G. Liu, Microstructure and corrosion resistance of AlCrFeCuCo high entropy alloy. J. Alloys Compd. 549, 195–199 (2013)
R. Wang, W. Chen, J. Zhong, L. Zhang, Experimental and numerical studies on the sluggish diffusion in face centered cubic Co–Cr–Cu–Fe–Ni high-entropy alloys. J. Mater. Sci. Technol. 34(10), 1791–1798 (2018)
K. Tsai, M. Tsai, J. Yeh, Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys. Acta Mater. 61(13), 4887–4897 (2013)
B.S. Murty, J.-W. Yeh, S. Ranganathan, P.P. Bhattacharjee, High-Entropy Alloys (Elsevier, Amsterdam, 2019)
K. Alagarsamy et al., Mechanical Properties of High Entropy Alloy Al 0.1 CoCrFeNi for Peripheral Vascular Stent Application. Cardiovasc. Eng. Technol. 7(4), 448–454 (2016)
J. Li, W. Jia, J. Wang, H. Kou, D. Zhang, E. Beaugnon, Enhanced mechanical properties of a CoCrFeNi high entropy alloy by supercooling method. JMADE 95, 183–187 (2016)
H.W. Yao, J.W. Qiao, J.A. Hawk, H.F. Zhou, M.W. Chen, M.C. Gao, Mechanical properties of refractory high-entropy alloys: experiments and modeling. J. Alloys Compd. 696, 1139–1150 (2017)
C.C. Juan et al., Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys. Intermetallics 62, 76–83 (2015)
Y. Zhang et al., Microstructures and properties of high-entropy alloys. Prog. Mater. Sci. 61, 1–93 (2013)
C. Li, Y. Zhou, Y. Xie, D. Zhou, D. Zhang, Effects of milling time and sintering temperature on structural evolution, densification behavior and properties of a W-20 wt% Cu alloy. J. Alloys Compd. 731, 537–545 (2018)
M.D.D. Alcalá, C. Real, I. Fombella, I. Trigo, J.M.M. Córdoba, Effects of milling time, sintering temperature, Al content on the chemical nature, microhardness and microstructure of mechanochemically synthesized FeCoNiCrMn high entropy alloy. J. Alloys Compd. 749, 834–843 (2018)
S.-H. Joo et al., Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering. J. Alloys Compd. 698, 591–604 (2017)
G.D.S.M.Z.J.R.G.C.L.C.-W.T.J.-W.Y.P.P. Bhattacharjee, Microstructure and texture evolution during annealing of equiatomic\nCoCrFeMnNi high-entropy alloy. J. Alloys Compd. 587, 544–552 (2014)
T.T. Shun, Y.C. Du, Age hardening of the Al0.3CoCrFeNiC0.1high entropy alloy. J. Alloys Compd. 478(1–2), 269–272 (2009)
R. Li, Y. Shi, Z. Wang, L. Wang, J. Liu, W. Jiang, Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting. Appl. Surf. Sci. 256(13), 4350–4356 (2010)
C.C. Yang, J.L. Hang Chau, C.J. Weng, C.S. Chen, Y.H. Chou, Preparation of high-entropy AlCoCrCuFeNiSi alloy powders by gas atomization process. Mater. Chem. Phys. 202, 151–158 (2017)
S. Zhou et al., Microstructure evolution of Al0. 6CoCrFeNi high entropy alloy powder prepared by high pressure gas atomization. Trans. Nonferrous Met. Soc. China 28(5), 939–945 (2018)
D. Yim et al., Compaction behavior of water-atomized CoCrFeMnNi high-entropy alloy powders. Mater. Chem. Phys. 210, 95–102 (2018)
Y. Liu, J. Wang, Q. Fang, B. Liu, Y. Wu, S. Chen, Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder. Intermetallics 68, 16–22 (2016)
J. Wang et al., Flow behavior and microstructures of powder metallurgical CrFeCoNiMo0. 2 high entropy alloy during high temperature deformation. Mater. Sci. Eng., A 689, 233–242 (2017)
R. Clinktan, V. Senthil, K.R. Ramkumar, S. Sivasankaran, F.A. Al-Mufadi, Effect of boron carbide nano particles in CuSi4Zn14 silicone bronze nanocomposites on matrix powder surface morphology and structural evolution via mechanical alloying. Ceram. Int. 45, 33492 (2018)
B. Madavali, J.-H. Lee, J.K. Lee, K.Y. Cho, S. Challapalli, S.-J. Hong, Effects of atmosphere and milling time on the coarsening of copper powders during mechanical milling. Powder Technol. 256, 251–256 (2014)
F.T. Mahi, O.-H. Kwon, Liquid Phase Sintering: Ceramics (Elsevier, Amsterdam, 2016)
H. Cheng, X. Liu, Q. Tang, W. Wang, X. Yan, P. Dai, Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering. J. Alloys Compd. 775, 742–751 (2019)
D. Oleszak, A. Antolak-dudka, T. Kulik, High entropy multicomponent WMoNbZrV alloy processed by mechanical alloying. Mater. Lett. 232, 160–162 (2018)
A.I. Yurkova, V.V. Cherniavsky, V. Bolbut, M. Krüger, I. Bogomol, Structure formation and mechanical properties of the high-entropy AlCuNiFeCr alloy prepared by mechanical alloying and spark plasma sintering. J. Alloys Compd. 786, 139–148 (2019)
A. Emamifar, B. Sadeghi, P. Cavaliere, H. Ziaei, Microstructural evolution and mechanical properties of AlCrFeNiCoC high entropy alloy produced via spark plasma sintering. Powder Metall. 62(1), 61–70 (2019)
F. Yuhu, Z. Yunpeng, G. Hongyan, S. Huimin, H. Li, Alnicrfexmo0. 2CoCu high entropy alloys prepared by powder metallurgy. Rare Met. Mater. Eng. 42(6), 1127–1129 (2013)
V. Shivam, J. Basu, V.K. Pandey, Y. Shadangi, N.K. Mukhopadhyay, Alloying behaviour, thermal stability and phase evolution in quinary AlCoCrFeNi high entropy alloy. Adv. Powder Technol. 29(9), 2221–2230 (2018)
F.J. Baldenebro-Lopez, J.M. Herrera-Ramírez, S.P. Arredondo-Rea, C.D. Gómez-Esparza, R. Martínez-Sánchez, Simultaneous effect of mechanical alloying and arc-melting processes in the microstructure and hardness of an AlCoFeMoNiTi high-entropy alloy. J. Alloys Compd. 643, S250–S255 (2015)
C. Sun, P. Li, S. Xi, Y. Zhou, S. Li, X. Yang, A new type of high entropy alloy composite Fe18Ni23Co25Cr21Mo8WNb3C2 prepared by mechanical alloying and hot pressing sintering. Mater. Sci. Eng. A 728, 144–150 (2018)
Z. Xu, M.A. Hodgson, P. Cao, A comparative study of powder metallurgical (PM) and wrought Fe–Mn–Si alloys. Mater. Sci. Eng., A 630, 116–124 (2015)
Z. Fu et al., Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7. 5Cu17. 5 high-entropy alloy. Acta Mater. 107, 59–71 (2016)
Z. Tang et al., Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization. Mater. Sci. Eng., A 647, 229–240 (2015)
L.F. Francis, Powder Processes, in Materials Processing, ed. by L.F.B.T.-M.P. Francis (Academic Press, Boston, 2016), pp. 343–414
Z. Fu, W. Chen, H. Wen, Z. Chen, E.J. Lavernia, Effects of Co and sintering method on microstructure and mechanical behavior of a high-entropy Al0. 6NiFeCrCo alloy prepared by powder metallurgy. J. Alloys Compd. 646, 175–182 (2015)
N. Eißmann, B. Klöden, T. Weißgärber, B. Kieback, High-entropy alloy CoCrFeMnNi produced by powder metallurgy. Powder Metall. 60(3), 184–197 (2017)
J. Pan, T. Dai, T. Lu, X. Ni, J. Dai, M. Li, Microstructure and mechanical properties of Nb25Mo25Ta25W25 and Ti8Nb23Mo23Ta23W23 high entropy alloys prepared by mechanical alloying and spark plasma sintering. Mater. Sci. Eng. A 738, 362–366 (2018)
D. Yim, P. Sathiyamoorthi, S.-J. Hong, H.S. Kim, Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering. J. Alloys Compd. 781, 389–396 (2019)
S. Mohanty, N.P. Gurao, P. Padaikathan, K. Biswas, Ageing behaviour of equiatomic consolidated Al20Co20Cu20Ni20Zn20 high entropy alloy. Mater. Charact. 129, 127–134 (2017)
K.B. Zhang, Z.Y. Fu, J.Y. Zhang, W.M. Wang, S.W. Lee, K. Niihara, Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying. J. Alloys Compd. 495(1), 33–38 (2010)
R.S. Ganji, P.S. Karthik, K.B.S. Rao, K.V. Rajulapati, Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro-and nanoindentation methods. Acta Mater. 125, 58–68 (2017)
S.-J.L. Kang, S.-J.L. Kang, Basis of liquid phase sintering, in Sintering, ed. by S.-J.L.B.T.-S. Kang (Butterworth-Heinemann, Oxford, 2005), pp. 199–203
M.A. Hemphill et al., Fatigue behavior of Al0. 5CoCrCuFeNi high entropy alloys. Acta Mater. 60(16), 5723–5734 (2012)
S. Singh, N. Wanderka, B.S. Murty, U. Glatzel, J. Banhart, Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy. Acta Mater. 59(1), 182–190 (2011)
F. Otto, N.L. Hanold, E.P. George, Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries. Intermetallics 54, 39–48 (2014)
L.C. Tsao, C.S. Chen, C.P. Chu, Age hardening reaction of the Al0.3CrFe1.5MnNi0.5 high entropy alloy. Mater. Des. 36, 854–858 (2012)
M. Zhan, C. Gu, Z. Jiang, L. Hu, H. Yang, Application of ductile fracture criteria in spin-forming and tube-bending processes. Comput. Mater. Sci. 47(2), 353–365 (2009)
L. Hou, J. Hui, Y. Yao, J. Chen, J. Liu, Effects of Boron Content on microstructure and mechanical properties of AlFeCoNiBx High Entropy Alloy Prepared by vacuum arc melting. Vacuum 164, 212–218 (2019)
Y. Du, Y. Lu, T. Wang, T. Li, G. Zhang, Effect of electromagnetic stirring on microstructure and properties of Al0.5CoCrCuFeNi alloy. Procedia Eng. 27(2011), 1129–1134 (2012)
H. Luo, Z. Li, A.M. Mingers, D. Raabe, Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution. Corros. Sci. 134, 131–139 (2018)
E. Fazakas, J.Q. Wang, V. Zadorozhnyy, L.K. Varga, Microstructural evolution and corrosion behavior of Al 25 Ti 25 Ga 25 Be 25 equi-molar composition alloy. Mater. Corros. 119049(7), 691–695 (2014)
Y. Liu et al., Microstructure and mechanical properties of refractory HfMo0. 5NbTiV0. 5Six high-entropy composites. J. Alloys Compd. 694, 869–876 (2017)
H. Qiu, H. Zhu, J. Zhang, Z. Xie, Effect of Fe content upon the microstructures and mechanical properties of FexCoNiCu high entropy alloys. Mater. Sci. Eng. A 769, 138514 (2020)
D.G. Kim et al., Effects of annealing temperature on microstructures and tensile properties of a single FCC phase CoCuMnNi high-entropy alloy. J. Alloys Compd. 812, 152111 (2020)
Z. Yao, Comparison of structures and properties of arc-melted and induction-melted high entropy alloys, Master’s thesis, Tampere Univ. Technol. (2016)
H. Zheng et al., Transition of solid-liquid interface and tensile properties of CoCrFeNi high-entropy alloys during directional solidification. J. Alloys Compd. 787, 1023–1031 (2019)
H. Zheng et al., Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification. J. Mater. Sci. Technol. 38, 19–27 (2019)
S.T. Mileiko, S.A. Firstov, N.A. Novokhatskaya, V.F. Gorban, N.P. Krapivka, Oxide-fibre/high-entropy-alloy-matrix composites. Compos. Part A Appl. Sci. Manuf. 76, 131–134 (2015)
F. He et al., Designing eutectic high entropy alloys of CoCrFeNiNbx. J. Alloys Compd. 656, 284–289 (2016)
Y. Yu, F. He, Z. Qiao, Z. Wang, W. Liu, J. Yang, Effects of temperature and microstructure on the triblogical properties of CoCrFeNiNbx eutectic high entropy alloys. J. Alloys Compd. 775, 1376–1385 (2019)
N.A. Khan et al., High entropy alloy thin films of AlCoCrCu05FeNi with controlled microstructure. Appl. Surf. Sci. 495, 143560 (2019)
M. M. Hassan, 16—Antimicrobial Coatings for Textiles, A. B. T.-H. of A. C. Tiwari, Ed. Elsevier, 2018, pp. 321–355
J.A. Juhasz, S.M. Best, 6—Surface modification of biomaterials by calcium phosphate deposition, in Woodhead Publishing Series in Biomaterials, ed. by B. Williams (Woodhead Publishing, Cambridge, 2011), pp. 143–169
H. Kim et al., Mechanical and electrical properties of NbMoTaW refractory high-entropy alloy thin films. Int. J. Refract. Met. Hard Mater. 80, 286–291 (2018)
J. Pou, F. Lusquiños, R. Comesaña, M. Boutinguiza, 14—Production of biomaterial coatings by laser-assisted processes, in Woodhead Publishing Series in Welding and Other Joining Technologies, ed. by J. Lawrence, J. Pou, D.K.Y. Low, L.M.P. Toyserkani (Woodhead Publishing, Cambridge, 2010), pp. 394–425
A. Michelmore, Thin film growth on biomaterial surfaces, in Thin Film Coatings for Biomaterials and Biomedical Applications, ed. by B.A. Griesser (Woodhead Publishing, Cambridge, 2016), pp. 29–47
T.-W. Lu et al., Microstructures and mechanical properties of CoCrFeNiAl0.3 high-entropy alloy thin films by pulsed laser deposition. Appl. Surf. Sci. 494(May), 72–79 (2019)
K.C. Cheng, J.H. Chen, S. Stadler, S.H. Chen, Properties of atomized AlCoCrFeNi high-entropy alloy powders and their phase-adjustable coatings prepared via plasma spray process. Appl. Surf. Sci. 478, 478–486 (2019)
V. Ocelik, N. Janssen, S.N. Smith, J.T.M. De Hosson, Additive manufacturing of high-entropy alloys by laser processing. JOM 68(7), 1810–1818 (2016)
X. Li, Additive manufacturing of advanced multi-component alloys: bulk metallic glasses and high entropy alloys. Adv. Eng. Mater. 20(5), 1700874 (2018)
R. Li, P. Niu, T. Yuan, P. Cao, C. Chen, K. Zhou, Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property. J. Alloys Compd. 746, 125–134 (2018)
J. Joseph, P. Hodgson, T. Jarvis, X. Wu, N. Stanford, D. Mark, Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured Al x CoCrFeNi high entropy alloys. Mater. Sci. Eng. A 733(May), 59–70 (2018)
R. Wang, K. Zhang, C. Davies, X. Wu, Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication. J. Alloys Compd. 694, 971–981 (2017)
Z.Y. Rao et al., Affordable FeCrNiMnCu high entropy alloys with excellent comprehensive tensile properties. Intermetallics 77, 23–33 (2016)
C. Ni, Y. Shi, J. Liu, G. Huang, Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding. Opt. Laser Technol. J. 105, 257–263 (2018)
J.B. Fogagnolo, F. Velasco, M.H. Robert, J.M. Torralba, Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders. Mater. Sci. Eng. A 342(1–2), 131–143 (2003)
R. M. Vilar, “Laser cladding,” in ALT’02 International Conference on Advanced Laser Technologies, 2003, vol. 5147, pp. 385–392
S.-K. Wong, T.-T. Shun, C.-H. Chang, C.-F. Lee, Microstructures and properties of Al0. 3CoCrFeNiMnx high-entropy alloys. Mater. Chem. Phys. 210, 146–151 (2018)
B.D. Ratner, A.S. Hoffman, F.J. Schoen, J.E. Lemons, Biomaterials science: an introduction to materials in medicine (Elsevier, Amsterdam, 2004)
X. An, Q. Liu, B. Zheng, Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAlxSiy coating. Infra. Laser Eng 43, 1140–1144 (2014)
T. Huang, L. Jiang, C. Zhang, H. Jiang, Y. Lu, T. Li, Effect of carbon addition on the microstructure and mechanical properties of CoCrFeNi high entropy alloy. Sci. China Technol. Sci. 61(1), 117–123 (2018)
R.B. Nair, H.S. Arora, S. Mukherjee, S. Singh, H. Singh, H.S. Grewal, Exceptionally high cavitation erosion and corrosion resistance of a high entropy alloy. Ultrason. Sonochem. 41, 252–260 (2018)
Z.D. Han et al., Microstructures and mechanical properties of TixNbMoTaW refractory high-entropy alloys. Mater. Sci. Eng. A 712, 380–385 (2018)
N.N. Guo et al., Microstructure and mechanical properties of in situ MC-carbide particulates-reinforced refractory high-entropy Mo0. 5NbHf0. 5ZrTi matrix alloy composite. Intermetallics 69, 74–77 (2016)
Z.D. Han et al., Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys. Intermetallics 84, 153–157 (2017)
O.N. Senkov, S.V. Senkova, C. Woodward, Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys. Acta Mater. 68, 214–228 (2014)
O.N. Senkov, C. Woodward, D.B. Miracle, Microstructure and properties of aluminum-containing refractory high-entropy alloys. JOM 66(10), 2030–2042 (2014)
X. Liu et al., Microstructure and mechanical properties of FeCoCrNiMnTi0.1C0.1 high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering. Vacuum 165(7), 297–304 (2019)
W. Ji et al., Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering. Intermetallics 56, 24–27 (2015)
O.N. Senkov, J.M. Scott, S.V. Senkova, D.B. Miracle, C.F. Woodward, Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy. J. Alloys Compd. 509(20), 6043–6048 (2011)
S. Jiang, Z. Lin, H. Xu, Y. Sun, Studies on the microstructure and properties of AlxCoCrFeNiTi1-xhigh entropy alloys. J. Alloys Compd. 741, 826–833 (2018)
P. Cui et al., Microstructure and mechanical behaviors of CoFeNiMnTixAl1-x high entropy alloys. Mater. Sci. Eng. A 731, 124–130 (2018)
M. Zhang, L. Zhang, J. Fan, G. Li, P.K. Liaw, R. Liu, Microstructure and enhanced mechanical behavior of the Al7Co24Cr21Fe24Ni24 high-entropy alloy system by tuning the Cr content Mengdi. Mater Sci Eng A 733, 299–306 (2018)
W. Wang, Z. Zhang, J. Niu, H. Wu, S. Zhai, Y. Wang, E ff ect of Al addition on structural evolution and mechanical properties of the Al x HfNbTiZr high-entropy alloys. Mater. Sci. Eng. A 16, 242–249 (2018)
N.N. Guo et al., Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy. Mater. Des. 81, 87–94 (2015)
C. Zhang, C. Zhu, S. Shin, K. Vecchio, Enhancement of <001> recrystallization texture in non-equiatomic Fe–Ni–Co–Al-based high entropy alloys by combination of annealing and Cr addition. J. Alloys Compd. 768, 277–286 (2018)
N.Y. Yurchenko, N.D. Stepanov, A.O. Gridneva, M.V. Mishunin, G.A. Salishchev, S.V. Zherebtsov, Effect of Cr and Zr on phase stability of refractory Al–Cr–Nb–Ti–V–Zr high-entropy alloys. J. Alloys Compd. 757, 403–414 (2018)
S. Z. Z. Niu, H. C. C. Kou, J. Wang, and J. S. S. Li, Improved tensile properties of Al0.5CoCrFeNi high-entropy alloy by tailoring microstructures, Rare Met. 1–6 (2017)
É. Fazakas, J.Q. Wang, V. Zadorozhnyy, D.V. Louzguine-Luzgin, L.K. Varga, Microstructural evolution and corrosion behavior of Al25Ti25Ga25Be25 equi-molar composition alloy. Mater. Corros. 65(7), 691–695 (2014)
X. Liu et al., Microstructure and mechanical properties of FeCoCrNiMnTi0. 1C0. 1 high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering. Vacuum 165, 297–304 (2019)
O. Maulik, D. Kumar, S. Kumar, D.M. Fabijanic, V. Kumar, Structural evolution of spark plasma sintered AlFeCuCrMgx (x = 0, 0.5, 1, 1.7) high entropy alloys. Intermetallics 77, 46–56 (2016)
X. Qiu, Microstructure, hardness and corrosion resistance of Al 2 CoCrCuFeNiTi x high-entropy alloy coatings prepared by rapid solidi fi cation. J. Alloys Compd. 735, 359–364 (2018)