Manganese(II)-selective PVC membrane electrode based on a pentaazamacrocyclic manganese complex

Elsevier BV - Tập 110 Số 2 - Trang 377-381 - 2005
Ashok Kumar Singh1, Puja Saxena1, Amit Panwar1
1Department of Chemistry, Indian Institute of Technology-Roorkee, Roorkee, 247 667, India

Tóm tắt

Từ khóa


Tài liệu tham khảo

1993

Izatt, 1985, Thermodynamic and kinetic data for cation–macrocycle interaction, Chem. Rev., 85, 271, 10.1021/cr00068a003

Izatt, 1991, Thermodynamic and kinetic data for macrocycle interaction with cations and anions, Chem. Rev., 91, 1721, 10.1021/cr00008a003

1990

Bakker, 1997, Carrier based ion-selective electrodes and bulk optodes: 1. General characteristics, Chem. Rev., 97, 3083, 10.1021/cr940394a

Pungor, 1965, Solid-state manganese selective electrode, Hung. Sci. Instrum., 3, 2

Hirata, 1972, Ion-selective chalcogenide electrodes for a number of cations, Talanta, 19, 391, 10.1016/0039-9140(72)80100-0

Midgley, 1985, The manganese (IV) oxide electrode as a manganese (II) sensor, Talanta, 32, 7, 10.1016/0039-9140(85)80004-7

Agarwala, 1989, A heterogeneous precipitate based Mn(II) coated wire ion-selective electrode, Anal. Lett., 22, 1451, 10.1080/00032718908051611

Sun, 1994, A permanganate selective electrode, Fenxi Huaxue, 22, 1138

Dong, 1996, Determination of micro amounts of manganese by catalytic potentiometry with a crystal violet ion-selective electrode, Fenxi Huaxue, 24, 494

Fakhari, 1997, PVC-based hexathia-18-crown-6-tetraone sensor for mercury (II) ions, Anal. Chem., 69, 3693, 10.1021/ac970133b

Javanbakht, 1999, Mercury (II) ion-selective electrode based on dibenzodiazathia-18-crown-6-dione, Electroanalysis, 11, 81, 10.1002/(SICI)1521-4109(199902)11:2<81::AID-ELAN81>3.0.CO;2-Q

Shamsipur, 2000, PVC-based 1,3,5-trithiane sensor for cerium (III) ions, Anal. Chem., 72, 2391, 10.1021/ac991155w

Shamsipur, 2001, Lead selective membrane potentiometric sensor based on a 18-membered thiacrown derivative, Anal. Sci., 17, 935, 10.2116/analsci.17.935

Javanbakht, 2000, Cadmium (II) selective membrane electrode based on a synthesized tetrol compound, Anal. Chim. Acta, 408, 75, 10.1016/S0003-2670(99)00771-0

Ganjali, 2000, Nickel (II) ion-selective electrode based on 2-methyl-4-(4-methoxyphenyl)-2,6-diphenyl-2H-thiopyran, Electroanalysis, 12, 1138, 10.1002/1521-4109(200010)12:14<1138::AID-ELAN1138>3.0.CO;2-X

Ganjali, 2000, Nickel (II) ion-selective electrode based on 2,5-thiophenyl bis(5-tert-butyl-1,3-benzoxazole), Anal. Lett., 33, 3139, 10.1080/00032719.2000.10399491

Ganjali, 1998, Beryllium-selective membrane electrode based on benzo-9-crown-3, Anal. Chem., 70, 5259, 10.1021/ac980340r

Shamsipur, 1999, Zinc selective membrane potentiometric sensor based on a recently synthesized benzosubstituted macrocyclic diamide, Sens. Actuat. B, 59, 30, 10.1016/S0925-4005(99)00160-4

Amemiya, 2000, Catonic or anionic sites? Selectivity optimization of ion selective electrodes based on charged ionophores, Anal. Chem., 72, 1618, 10.1021/ac991167h

Buhlmann, 1998, Carrier based ion selective electrodes and bulk optodes. 2. Ionophores for potentiometric and optical sensors, Chem. Rev., 98, 1593, 10.1021/cr970113+

Bakker, 1999, Electroanalysis polymer membrane ion-selective electrodes. What are the limits?, Electroanalysis, 11, 915, 10.1002/(SICI)1521-4109(199909)11:13<915::AID-ELAN915>3.0.CO;2-J

Bakker, 2000, Selectivity of potentiometric ion sensors, Anal. Chem., 72, 1127, 10.1021/ac991146n