Major energy efficiency opportunities in laboratories—Implications for health and safety

ACGIH. Industrial Ventilation: A Manual of Recommended Practice – 24th ed. The American Conference of Governmental Industrial Hygienists, Inc. (ACGIH), eds. Cincinnati, OH. ISBN: 1-882417-42-9, 2001. ANSI/AIHA, Z9.2-2001. Fundamentals Governing the Design and Operation of Local Exhaust Ventilation Systems, American National Standards Institute, Inc./American Industrial Hygiene Association. ANSI/AIHA Z9.5-2003. American National Standard for Laboratory Ventilation, American National Standards Institute, Inc./American Industrial Hygiene Association. ASHRAE. ASHRAE/ANSI Standard 110: Method of Testing Performance of Laboratory Fume Hoods. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, Georgia, 1995. Bell, G.; Sartor, D.; Mills, E. The Berkeley Hood: Development and Commercialization of an Innovative High-Performance Laboratory Fume Hood, A Progress and Research Status: 1995 – September 2003. Lawrence Berkeley National Laboratory Report LBNL-48983 (rev.), 2003. Available at: http://ateam.lbl.gov/hightech/fumehood/Publications.html. Bell, G. C.; Mills, E.; Sartor, D.; Avery, D.; Siminovitch, M.; Piette, M. A. A Design Guide for Energy-Efficient Research Laboratories, LBNL-PUB-777. Lawrence Berkeley National Laboratory, Center for Building Science, Applications Team, September 1996–2003. Brewer, B. Quantification of Incremental Energy Savings Related to Hood Sash Best Management Practices, Presentation at 2003 Labs21 Annual conference, Denver, Colorado, October 2003. Bartholomew P., 2004, ASHRAE J., 35 CAL/OSHA Standard 5154.1 Ventilation Requirements for Laboratory-Type Hood Operations. Caplan K.J., 1982, Am. Ind. Hyg. Assoc. J., 43, 738, 10.1080/15298668291410503 Energy Information Administration. Commercial Buildings Energy Consumption Survey, 2003. Available on the web at: http://www.eia.doe.gov/emeu/cbecs/contents.html. Greenley, P. L.; DiBerardinis, L. J.; Lorch, F. A. Containment Testing for Occupied and Unoccupied Laboratory Chemical Hoods. ASHRAE Transactions: Symposia, Winter Meeting, Chicago, IL, CH-99-9-1, 1999. Labs21. Optimizing Ventilation Rates in Laboratories, Pending publication by Laboratories for the 21st Century Program, 2006. Draft available from authors. Labs21. Low Pressure Drop Design for Laboratories, Published by Laboratories for the 21st Century Program, 2005. Available at: http://www.labs21century.gov/toolkit/bp_guide.htm. Labs21. Right-sizing Laboratory Equipment Loads, Published by Laboratories for the 21st Century Program, 2005. Available at: http://www.labs21century.gov/toolkit/bp_guide.htm. Labs21. Minimizing Reheat Energy Use in Laboratories, Published by Laboratories for the 21st Century Program, 2005. Available at: http://www.labs21century.gov/toolkit/bp_guide.htm. Labs21. Marian E. Koshland Integrated Natural Science Center, Published by Laboratories for the 21st Century Program, 2005. Available at: http://www.labs21century.gov/toolkit/case_studies.htm. Maine, G.; Frei, S.; Shwartz, W. Modeling Laboratory Design: An Integrated Process, Presentation at 2002 Labs21 Annual conference, Durham, North Carolina, October 2002. Available at: http://www.labs21century.gov/conf/past/2002/abstracts/e3_maine.htm. Mathew, P.; Greenberg, S.; Frenze, D.; Morehead, M.; Sartor, D.; Starr, W. Right-sizing Laboratory HVAC systems – Part 1 HPAC Engineering, September 2005. Mathew P., 2005, Right-sizing Laboratory HVAC systems – Part 2 HPAC Engineering McIntosh I. B. D., 2001, ASHRAE Laboratory Design Guide NFPA-45-2004. National Fire Protection Association. OSHA 29 CFR 1919–1450 Appendix C. Occupational Safety and Health Administration, 1990. Weale, J.; Rumsey, P.; Sartor, D.; Lock, L. E. Laboratory low-pressure drop design. ASHRAE J. 2002.