Magnetic actuator for active damping of boring bars

Rivin, 1989, Improving Dynamic Performance of Cantilever Boring Bars, Annals of the CIRP, 38, 377, 10.1016/S0007-8506(07)62727-9 Miguélez, 2010, Improvement of Chatter Stability in Boring Operations with Passive Vibration Absorbers, International Journal of Mechanical Sciences, 52, 1376, 10.1016/j.ijmecsci.2010.07.003 Yang, 2010, Optimization of Multiple Tuned Mass Dampers to Suppress Machine Tool Chatter, International Journal of Machine Tools and Manufacture, 50, 834, 10.1016/j.ijmachtools.2010.04.011 Tanaka, 1994, Active Chatter Suppression of Slender Boring Bar using Piezoelectric Actuators, JSME International Journal Series C, 37, 601 Pratt, 2001, Chatter Control and Stability Analysis of a Cantilever Boring Bar Under Regenerative Cutting Conditions, Philosophical Transactions of the Royal Society of London, Part A, 359, 759, 10.1098/rsta.2000.0754 Ast, 2007, Adaptronic Vibration Damping for Machine Tools, Annals of the CIRP, 56, 379, 10.1016/j.cirp.2007.05.088 van Dijk, 2012, Robust active chatter control in the high-speed milling process, IEEE Transactions on Control Systems Technology, 20, 901, 10.1109/TCST.2011.2157160 Ganguli, 2007, Regenerative Chatter Reduction by Active Damping Control, Journal of Sound and Vibration, 300, 847, 10.1016/j.jsv.2006.09.005 Brecher, 2005, Electrohydraulic Active Damping System, Annals of the CIRP, 54, 389, 10.1016/S0007-8506(07)60129-2 Munoa, 2013, Chatter Suppression in Ram Type Travelling Column Milling Machines Using a Biaxial Inertial Actuator, Annals of the CIRP, 62, P.407, 10.1016/j.cirp.2013.03.143 Chen, 2007, Control Approaches to the Suppression of Machining Chatter Using Active Magnetic Bearings, IEEE Transactions on Control Systems Technology, 15, 220, 10.1109/TCST.2006.886419 Lu, 2005, Ultrafast Tool Servos for Diamond Turning, Annals of the CIRP, 54, 383, 10.1016/S0007-8506(07)60128-0