Magnesium–samarium oxide nanocomposites: Room-temperature depth-sensing nanoindentation response

Robson, 2016, Grain boundary segregation of rare-earth elements in magnesium alloys, Metall. Mater. Trans. A, 47, 522, 10.1007/s11661-015-3199-3 Tekumalla, 2015, Mechanical properties of magnesium-rare earth alloy systems: a review, Metals, 5, 1, 10.3390/met5010001 Hassan, 2007, Development of nano-Y2O3 containing magnesium nanocomposites using solidification processing, J. Alloy. Comp., 429, 176, 10.1016/j.jallcom.2006.04.033 Ding, 2014, Effect of Re addition on the ignition resistance of pure magnesium, Mater. Sci. Forum, 788, 88, 10.4028/www.scientific.net/MSF.788.88 Navrotsky, 2015, Thermodynamics of solid phases containing rare earth oxides, J. Chem. Thermodyn., 88, 126, 10.1016/j.jct.2015.04.008 Martienssen, 2006 Kujur, 2017, Significantly enhancing the ignition/compression/damping response of monolithic magnesium by addition of Sm2O3 nanoparticles, Metals, 7, 357, 10.3390/met7090357 Li, 1991, The mechanisms of indentation creep, Acta Metall. Mater., 39, 3099, 10.1016/0956-7151(91)90043-Z Li, 2004, Size effects of nanoindentation creep, J. Mater. Res., 19, 513, 10.1557/jmr.2004.19.2.513 Zhao, 2018, Indentation size and loading strain rate dependent creep deformation of nanocrystalline Mo, Thin Solid Films, 653, 365, 10.1016/j.tsf.2018.03.068 Haghshenas, 2018, Indentation-based rate-dependent plastic deformation of polycrystalline pure magnesium, Mater. Sci. Eng., 716, 63, 10.1016/j.msea.2018.01.036 Haghshenas, 2019, Depth sensing indentation of magnesium/boron nitride nanocomposites, J. Compos. Mater., 53, 1751, 10.1177/0021998318808358 Sankaranarayanan, 2015, Review on mechanical properties of magnesium (nano) composites developed using energy efficient microwaves, Powder Metall., 58, 183, 10.1179/1743290115Y.0000000009 Wu, 2019, Effects of annealing on microstructure and mechanical properties of rapidly solidified Cu-3 wt% Ag-1 wt% Zr, Mater. Sci. Eng., 739, 357, 10.1016/j.msea.2018.10.062 Nam, 2018, Structural effect of two-dimensional BNNS on grain growth suppressing behaviors in Al-matrix nanocomposites, Sci. Rep., 8, 1614, 10.1038/s41598-018-20150-5 Hassold, 1990 Mirza, 2015, A unified model for the prediction of yield strength in particulate-reinforced metal matrix nanocomposites, Materials, 8, 5138, 10.3390/ma8085138 Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 7, 1564, 10.1557/JMR.1992.1564 Jian, 2013, Dislocation energetics and Pop-ins in AlN thin films by Berkovich nanoindentation, Materials, 6, 4259, 10.3390/ma6094259 Lorenz, 2003, Pop-in effect as homogeneous nucleation of dislocations during nanoindentation, Phys. Rev. B, 67, 172101, 10.1103/PhysRevB.67.172101 Ghasemi, 2018, Microstructure and nanoindentation analysis of Mg-SiC nanocomposite powders synthesized by mechanical milling, Mater. Char., 142, 137, 10.1016/j.matchar.2018.05.023 Bočan, 2015, Nanomechanical analysis of AZ31 magnesium alloy and pure magnesium correlated with crystallographic orientation, Mater. Sci. Eng., 644, 121, 10.1016/j.msea.2015.07.055 Guo, 2016, Distinguishing between slip and twinning events during nanoindentation of magnesium alloy AZ31, Scr. Mater., 110, 10, 10.1016/j.scriptamat.2015.07.034 Cao, 2006, On the determination of reduced Young's modulus and hardness of elastoplastic materials using a single sharp indenter, J. Mater. Res., 21, 215, 10.1557/jmr.2006.0018 Greer, 2005, Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients, Acta Mater., 53, 1821, 10.1016/j.actamat.2004.12.031 Nix, 1998, Indentation size effects in crystalline materials: a law for strain gradient plasticity, J. Mech. Phys. Solids, 46, 411, 10.1016/S0022-5096(97)00086-0 Bonn, 2009, Wetting and spreading, Rev. Mod. Phys., 81, 739, 10.1103/RevModPhys.81.739 Kozbial, 2014, Study on the surface energy of graphene by contact angle measurements, Langmuir, 30, 8598, 10.1021/la5018328 Dean, 2013, A procedure for extracting primary and secondary creep parameters from nanoindentation data, Mech. Mater., 65, 124, 10.1016/j.mechmat.2013.05.014 Sharma, 2000, Hot hardness and indentation creep studies of a Fe–28Al–3Cr–0.2 C alloy, Mater. Sci. Eng., 278, 106, 10.1016/S0921-5093(99)00590-0 De La Torre, 1991, Indentation creep of lead and lead-copper alloys, J. Mater. Sci., 26, 4351, 10.1007/BF00543650 Haghshenas, 2019, Magnesium nanocomposites: an overview on time-dependent plastic (creep) deformation, Def. Technol., 15, 123, 10.1016/j.dt.2018.08.008