Machinability of carbon fiber-epoxy composite materials in turning

Mallick, 1988, Fiber-Reinforced Composites, 3 Schwartz, 1984 Reugg, 1980, Composite propeller shafts design and optimization, Vol. 2, 1740 Lee, 1985, Manufacturing of a graphite epoxy composite spindle for a machine tool, 34, 365 Lee, 1991, Manufacturing of a SCARA type direct-drive robot with graphite fiber epoxy composite material, Robotica, 9, 219, 10.1017/S0263574700010274 Kim, 1990, Cutting (milling) characteristics of carbon fiber/epoxy composites, Trans. Korean Soc. Mech. Eng., 14, 237 Lubin, 1982, 625 Koplev, 1980, Cutting of CFRP with single edge tools, Vol. 2, 1597 Koplev, 1983, The cutting process, chips and cutting force in machining CFRP, Composites, 14, 371, 10.1016/0010-4361(83)90157-X Sakuma, 1983, Tool wear in cutting glass-fiber-reinforced plastics (the relationship between fiber orientation and tool wear), Bull. JSME, 26, 1420, 10.1299/jsme1958.26.1420 Sakuma, 1985, Tool wear in cutting carbon-fiber-reinforced plastics (the effects of physical properties of tool materials), Bull. JSME, 28, 2781, 10.1299/jsme1958.28.2781 Santhanakrishnan, 1988, Machinability characteristics of fiber reinforced plastics composites, J. Mech. Work. Technol., 17, 195, 10.1016/0378-3804(88)90021-6 Kaneeda, 1989, CFRP cutting mechanism, 216 Wang, 1990, Improvement of surface finish in the cutting of GFRP, 33 Ramulu, 1989, Machining of graphite/epoxy materials with polycrystalline diamond (PCD) tools, 33 König, 1985, Machining of fiber reinforced plastics, Ann. CIRP, 34, 537, 10.1016/S0007-8506(07)60186-3 Shaw, 1986, Metal Cutting Principles, 395 Shaw, 1986, Metal Cutting Principles, 510