MaTrEx AM: A new hybrid additive manufacturing process to selectively control mechanical properties

Honigmann, 2018, Patient-specific surgical implants made of 3D printed PEEK: material, technology, and scope of surgical application, Biomed. Res. Int., 2018, 1, 10.1155/2018/4520636 Wong, 2016, 3D-printed patient-specific applications in orthopedics, Orthop. Res. Rev., 8, 57 Pascariu, 2020, Design and testing of an unmanned aerial vehicle manufactured by fused deposition modeling, J. Aerosp. Eng., 33, 10.1061/(ASCE)AS.1943-5525.0001154 Ravindrababu, 2018, Evaluation of the influence of build and print orientations of unmanned aerial vehicle parts fabricated using fused deposition modeling process, J. Manuf. Process., 34, 659, 10.1016/j.jmapro.2018.07.007 Ahn, 2002, Anisotropic material properties of fused deposition modeling ABS, Rapid Prototyp. J., 8, 248, 10.1108/13552540210441166 Es-Said, 2000, Effect of layer orientation on mechanical properties of rapid prototyped samples, Mater. Manuf. Process., 15, 107, 10.1080/10426910008912976 Sood, 2009, Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method, Mater. Des., 30, 4243, 10.1016/j.matdes.2009.04.030 Thomas, 2001, Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation, Rapid Prototyp. J., 7, 148, 10.1108/13552540110395547 Kuznetsov, 2018, Strength of PLA components fabricated with fused deposition technology using a desktop 3D printer as a function of geometrical parameters of the process, Polymers, 10, 10.3390/polym10030313 Christiyan, 2016, A study on the influence of process parameters on the mechanical properties of 3D printed ABS composite, IOP Conf. Ser. Mater. Sci. Eng., 114, 10.1088/1757-899X/114/1/012109 Bellini, 2003, Mechanical characterization of parts fabricated using fused deposition modeling, Rapid Prototyp. J., 9, 252, 10.1108/13552540310489631 Cantrell, 2017, Experimental characterization of the mechanical properties of 3D printed ABS and polycarbonate parts, Conf. Proc. Soc. Exp. Mech. Ser., 3, 89, 10.1007/978-3-319-41600-7_11 Faes, 2016, Influence of inter-layer cooling time on the quasi-static properties of ABS components produced via fused deposition modelling, Procedia CIRP, 42, 748, 10.1016/j.procir.2016.02.313 Torres, 2016, An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments, Rapid Prototyp. J., 22, 387, 10.1108/RPJ-07-2014-0083 Travieso-Rodriguez, 2019, Mechanical properties of 3D-printing polylactic acid parts subjected to bending stress and fatigue testing, Materials, 12, 10.3390/ma12233859 Uddin, 2017, Evaluating mechanical properties and failure mechanisms of fused deposition modeling acrylonitrile butadiene styrene parts, J. Manuf. Sci. Eng. Trans. ASME, 139, 1, 10.1115/1.4036713 Coogan, 2017, Bond and part strength in fused deposition modeling, Rapid Prototyp. J., 23, 414, 10.1108/RPJ-03-2016-0050 Ziemian, 2015, Tensile and fatigue behavior of layered acrylonitrile butadiene styrene, Rapid Prototyp. J., 21, 270, 10.1108/RPJ-09-2013-0086 Moetazedian, 2020, Effect of environment on mechanical properties of 3D printed polylactide for biomedical applications, J. Mech. Behav. Biomed. Mater., 102, 10.1016/j.jmbbm.2019.103510 Allum, 2020, Interlayer bonding has bulk-material strength in extrusion additive manufacturing: New understanding of anisotropy, Addit. Manuf., 34 Allum, 2020, Fracture of 3D-printed polymers: crucial role of filament-scale geometric features, Eng. Fract. Mech., 224, 10.1016/j.engfracmech.2019.106818 Moetazedian, 2021, CONVEX (Continuously Varied Extrusion): a new scale of design for additive manufacturing, Addit. Manuf., 37 Gao, 2017, Investigating the Impact of acetone vapor smoothing on the strength and elongation of printed ABS parts, JOM, 69, 580, 10.1007/s11837-016-2214-5 P. Wjesundera, J. Schutte, J. Potgieter, The effects of acetone vapour inter-layer processing on fuseddeposition modelling 3D printed acrylonitrile butadiene styrene, in: Proceedings of the Twenty Fourth Int. Conf. Mechatronics Mach. Vis. Pract., 2017, 1–8. 〈https://doi.org/10.1109/M2VIP.2017.8211520〉. Neff, 2018, Impact of vapor polishing on surface quality and mechanical properties of extruded ABS, Rapid Prototyp. J., 24, 501, 10.1108/RPJ-03-2017-0039 Garg, 2017, Chemical vapor treatment of ABS parts built by FDM: analysis of surface finish and mechanical strength, Int. J. Adv. Manuf. Technol., 89, 2175, 10.1007/s00170-016-9257-1 Zhang, 2017, Temperature-dependent mechanical properties of ABS parts fabricated by fused deposition modeling and vapor smoothing, Int. J. Precis. Eng. Manuf., 18, 763, 10.1007/s12541-017-0091-7 Valerga, 2020, On the relationship between mechanical properties and crystallisation of chemically post-processed additive manufactured polylactic acid pieces, Polymers, 12, 1, 10.3390/polym12040941 Valerga, 2019, Impact of chemical post-processing in fused deposition modelling (FDM) on polylactic acid (PLA) surface quality and structure, Polymers, 11, 10.3390/polym11030566 Valerga Puerta, 2019, Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts, Rapid Prototyp. J., 26, 585, 10.1108/RPJ-06-2019-0176 ASTM D1708-18, Standard Test Method for Tensile Properties of Plastics By Use of Microtensile, 2002. Moetazedian, 2021, Mechanical performance of 3D printed polylactide during degradation, Addit. Manuf., 38 Vyavahare, 2014, Analysis of structural rearrangements of poly(lactic acid) in the presence of water, J. Phys. Chem. B, 118, 4185, 10.1021/jp500219j Naga, 2011, Crystallization of amorphous poly(lactic acid) induced by organic solvents, J. Appl. Polym. Sci., 119, 2058, 10.1002/app.32890 Naga, 2013, Crystallization of amorphous poly(lactic acid) induced by vapor of acetone to form high crystallinity and transparency specimen, Open J. Polym. Chem., 3, 29, 10.4236/ojpchem.2013.32006 Farah, 2016, Physical and mechanical properties of PLA, and their functions in widespread applications — a comprehensive review, Adv. Drug Deliv. Rev., 107, 367, 10.1016/j.addr.2016.06.012 A. Gleadall, FullControl GCode Designer: open-source software for unconstrained design in additive manufacturing. Additive Manufacturing (2021) 102109, Version Heron01, 〈www.fullcontrolgcode.com〉(Accessed 23 February 2020).