Low-temperature preparation of dense (Gd,Ce)O2−δ–Gd2O3 composite buffer layer by aerosol deposition for YSZ electrolyte-based SOFC

Singhal, 2004 Singhal, 2000, Advances in solid oxide fuel cell technology, Solid State Ionics, 135, 305, 10.1016/S0167-2738(00)00452-5 Steele, 2000, Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500 °C, Solid State Ionics, 129, 95, 10.1016/S0167-2738(99)00319-7 Singh, 2004, Solid oxide fuel cells: technology status, Int J Appl Ceram Tech, 1, 5, 10.1111/j.1744-7402.2004.tb00149.x Shao, 2004, A high-performance cathode for the next generation of solid-oxide fuel cells, Nature, 431, 170, 10.1038/nature02863 Simmer, 2006, Degradation mechanisms of La–Sr–Co–Fe–O3 SOFC cathodes, Electrochem Solid-State Lett, 9, A478, 10.1149/1.2266160 Kim, 2006, Effects of chrome contamination on the performance of La0.6Sr0.4Co0.2Fe0.8O3 cathode used in solid oxide fuel cells, J Electrochem Soc, 153, A880, 10.1149/1.2181435 Wang, 1981, Oxygen-ion conductivity and defect interactions in yttria-doped ceria, Solid State Ionics, 2, 95, 10.1016/0167-2738(81)90005-9 Zha, 2003, Effect of Gd (Sm) doping on properties of ceria electrolyte for solid oxide fuel cells, J Power Sources, 115, 44, 10.1016/S0378-7753(02)00625-0 Tsoga, 2000, Gadolinia-doped ceria and yittria stabilized zirconia interfaces: regarding their application for SOFC technology, Acta Mater, 48, 4709, 10.1016/S1359-6454(00)00261-5 Kim, 2006, Intermediate temperature solid oxide fuel cell using (La, Sr)(Co, Fe)O3-based cathodes, Solid State Ionics, 177, 3211, 10.1016/j.ssi.2006.07.049 Kim, 2010, Effect of unsintered gadolinium-doped ceria buffer layer on performance of metal-supported solid oxide fuel cells using unsintered barium strontium cobalt ferrite cathode, J Power Sources, 195, 6420, 10.1016/j.jpowsour.2010.03.095 Akedo, 2006, Aerosol deposition of ceramic thick films at room temperature: densification mechanism of ceramic layers, J Am Ceram Soc, 89, 1834, 10.1111/j.1551-2916.2006.01030.x Seong BG, Song JH, Park YM, Bae HY, Ahn JS, Kim DH, et al. Anode supported SOFC with GDC barrier layer deposited by aerosol deposition method. Proceedings of the ASME 2010 8th International Fuel Cell Science; 2010, 33288. Seong BG, Bae HY, Choi JJ, Park DS. GDC buffer layer coating by aerosol deposition. Proceeding of The15th European Fuel Cell Forum; 2011, B1101. Bae H, Song J, Park Y, Ahn J. Fabrication of low-profile and large size solid oxide fuel cell combined with strength reinforcement layer and shrinkage control layer. Proceeding of 15th European Fuel Cell Forum; 2011, B0401. Choi, 2007, Effects of Pb(Zn1/3Nb2/3)O3 addition and post-annealing temperature on the electrical properties of Pb(ZrxTi1−x)O3 thick films prepared by aerosol deposition method, J Appl Phys, 102, 044101, 10.1063/1.2769342 Choi, 2010, Oxidation behavior of ferritic steel alloy coated with LSM–YSZ composite ceramics by aerosol deposition, J Alloy Comp, 492, 488, 10.1016/j.jallcom.2009.11.146 Choi, 2011, Low temperature fabrication of nano-structured porous LSM–YSZ composite cathode film by aerosol deposition, J Alloy Comp, 509, 2627, 10.1016/j.jallcom.2010.11.169