Low melting point solders based on Sn, Bi, and In elements

Gu, 2015, Material innovation opportunities for 3D integrated circuits from a wireless application point of view, MRS Bull., 40, 233, 10.1557/mrs.2015.9 Tu, 2017, Effect of Joule heating and current crowding on electromigration in mobile technology, Appl. Phys. Rev., 4, 10.1063/1.4974168 Liu, 2016, Scaling effect of interfacial reaction on intermetallic compound formation in Sn/Cu pillar down to 1 μm diameter, Acta Mater., 117, 146, 10.1016/j.actamat.2016.07.004 Liu, 2015, Synergistic effect of electromigration and Joule heating on system level weak-link failure in 2.5 D integrated circuits, J. Appl. Phys., 118, 135304, 10.1063/1.4932598 Chawla, 2009, Thermomechanical behaviour of environmentally benign Pb-free solders, Int. Mater. Rev., 54, 368, 10.1179/174328009X461069 Kotadia, 2014, A review: on the development of low melting temperature Pb-free solders, Microelectron. Reliab., 54, 1253, 10.1016/j.microrel.2014.02.025 Kotadia, 2012, Intermetallic compound growth suppression at high temperature in SAC solders with Zn addition on Cu and Ni–P substrates, J. Alloys Compd., 511, 176, 10.1016/j.jallcom.2011.09.024 Tu, 2011, Reliability challenges in 3D IC packaging technology, Microelectron. Reliab., 51, 517, 10.1016/j.microrel.2010.09.031 Hariharan, 2015, A comprehensive reliability study on a CoWoS 3D IC package, 573 Vijayaragavan, 2008, Package on Package warpage-impact on surface mount yields and board level reliability, 389 Shiue, 2003, A study of Sn-Bi-Ag-(In) lead-free solders, J. Mater. Sci., 38, 1269, 10.1023/A:1022822127193 Li, 2007, Comparison of interfacial reactions of Ni and Ni–P in extended contact with liquid Sn–Bi-based solders, Acta Mater., 55, 737, 10.1016/j.actamat.2006.09.003 Wang, 2018, Skin electronics from scalable fabrication of an intrinsically stretchable transistor array, Nature (Lond.), 555, 83, 10.1038/nature25494 Lee, 2020, Multifunctional materials for implantable and wearable photonic healthcare devices, Nat. Rev. Mater., 1 Tian, 2019, Nanowired bioelectric interfaces: focus review, Chem. Rev., 119, 9136, 10.1021/acs.chemrev.8b00795 Patel, 2019, Precision electronic medicine in the brain, Nat. Biotechnol., 37, 1007, 10.1038/s41587-019-0234-8 Anikeeva, 2018, Creating functional interfaces with biological circuits, Acc. Chem. Res., 51, 10.1021/acs.accounts.8b00167 Mei, 1992, Characterization of eutectic Sn-Bi solder joints, J. Electron. Mater., 21, 599, 10.1007/BF02655427 Shen, 2014, Effects of minor Cu and Zn additions on the thermal, microstructure and tensile properties of Sn–Bi-based solder alloys, J. Alloys Compd., 614, 63, 10.1016/j.jallcom.2014.06.015 Shalaby, 2013, Effect of silver and indium addition on mechanical properties and indentation creep behavior of rapidly solidified Bi-Sn based lead-free solder alloys, Mater. Sci. Eng. A, 560, 86, 10.1016/j.msea.2012.09.038 Dong, 2008, Effects of trace amounts of rare earth additions on microstructure and properties of Sn-Bi-based solder alloy, J. Electron. Mater., 37, 982, 10.1007/s11664-008-0458-8 Hua, 1999, Eutectic Sn–Bi as an alternative Pb-free solder Li, 2006, Interfacial reactions between molten Sn–Bi–X solders and Cu substrates for liquid solder interconnects, Acta Mater., 54, 2907, 10.1016/j.actamat.2006.02.030 Kim, 1996, Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening, Phys. Rev. B, 53, 16027, 10.1103/PhysRevB.53.16027 Flanders, 1997, Activation energies of intermetallic growth of Sn-Ag eutectic solder on copper substrates, J. Electron. Mater., 26, 883, 10.1007/s11664-997-0268-4 Tao, 2001, Selective interfacial reaction between Ni and eutectic BiSn lead-free solder, Chem. Mater., 13, 1051, 10.1021/cm000803l Chen, 2000, Long-term aging study on the solid-state reaction between 58Bi42Sn solder and Ni substrate, J. Electron. Mater., 29, 1200, 10.1007/s11664-000-0013-8 Shang, 2008, Bi-induced voids at the Cu3Sn/Cu interface in eutectic SnBi/Cu solder joints, Scripta Mater., 58, 409, 10.1016/j.scriptamat.2007.10.025 Ghosh, 2000, Coarsening kinetics of Ni3Sn4 scallops during interfacial reaction between liquid eutectic solders and Cu/Ni/Pd metallization, J. Appl. Phys., 8, 6887, 10.1063/1.1321791 Ma, 1962, Self-diffusion in liquid tin, J. Chem. Phys., 36, 3014, 10.1063/1.1732419 Kang, 1980, Growth kinetics of intermetallic phases at the liquid Sn and solid Ni interface, Scripta Metall., 14, 421, 10.1016/0036-9748(80)90338-5 Hua, 1998, Eutectic Sn-Bi as an alternative to Pb-free solders, 277 Jang, 2001, Comparison of electroplated eutectic Bi/Sn and Pb/Sn solder bumps on various UBM systems, Electron. Packag. Manuf. IEEE Trans., 24, 269, 10.1109/6104.980035 Raeder, 1994, The effect of aging on microstructure, room temperature deformation, and fracture of Sn-Bi/Cu solder joints, J. Electron. Mater., 23, 611, 10.1007/BF02653346 Poon, 2000, Residual shear strength of Sn-Ag and Sn-Bi lead-free SMT joints after thermal shock, IEEE Trans. Adv. Packag., 23, 708, 10.1109/6040.883762 Myung, 2016, Drop reliability of epoxy-contained Sn-58 wt.% Bi solder joint with ENIG and ENEPIG surface finish under temperature and humidity test, J. Electron. Mater., 45, 3651, 10.1007/s11664-016-4517-2 Chen, 2007, Electromigration-induced Bi segregation in eutectic SnBi solder joint, J. Electron. Mater., 36, 168, 10.1007/s11664-006-0025-0 Chen L, 2006, Electromigration study in the eutectic SnBi solder joint on the Ni/Au metallization[J], J. Mater. Res., 21, 962, 10.1557/jmr.2006.0113 Miao, 2000, Thermal cycling test in Sn-Bi and Sn-Bi-Cu solder joints, J. Mater. Sci. Mater. Electron., 11, 609, 10.1023/A:1008928729212 Zang, 2009, Wettability of molten Sn-Bi-Cu solder on Cu substrate, Mater. Lett., 63, 2067, 10.1016/j.matlet.2009.06.052 Sakuyama, 2009, Effects of a third element on microstructure and mechanical properties of eutectic Sn-Bi solder, Trans. Jpn. Inst. Electron. Packag., 2, 98, 10.5104/jiepeng.2.98 Chen, 2015, Effect of In on microstructure, thermodynamic characteristic and mechanical properties of Sn-Bi based lead-free solder, J. Alloys Compd., 633, 377, 10.1016/j.jallcom.2015.01.219 Mokhtari, 2014, Effects of In and Ni addition on microstructure of Sn-58Bi solder joint, J. Electron. Mater., 43, 4158, 10.1007/s11664-014-3359-z Li, 2005, Interactions between liquid Sn-Bi based solders and contact metals for high temperature applications, 441 Sun, 2015, Properties and microstructures of Sn-AgCu-X lead-free solder joints in electronic packaging, Adv. Mater. Sci. Eng., 2015, 639028, 10.1155/2015/639028 Shafiq, 2011, Electro-migration study of nano Al doped lead- free Sn-58Bi on Cu and Au/Ni/Cu ball grid array (BGA) packages, 1 Ma, 2015, Effects of Zn addition on mechanical properties of eutectic Sn-58Bi solder during liquid-state aging, Trans. Nonferrous Metals Soc. China, 25, 1225, 10.1016/S1003-6326(15)63719-0 Ma, 2015, Effects of Zn concentration on the aging reactions and IMC massive spalling phenomenon in the Sn–58Bi–xZn/Cu system, J. Mater. Sci. Mater. Electron., 26, 1338, 10.1007/s10854-014-2544-4 Chen, 2013, Microstructure, thermal and wetting properties of Sn-Bi-Zn lead-free solder, J. Electron. Mater., 42, 10.1007/s11664-013-2620-1 Zhang, 2015, Microstructures and properties of Sn58Bi, Sn35Bi0.3Ag, Sn35Bi1.0Ag solder and solder joints, J. Mater. Sci. Mater. Electron., 26, 7629, 10.1007/s10854-015-3400-x Zhang, 2014, Effect of Sb content on properties of Sn-Bi solders, Trans. Nonferrous Metals Soc. China, 24, 184, 10.1016/S1003-6326(14)63046-6 Shiue, 2010, Effect of La addition on the interfacial intermetallics and bonding strengths of Sn-58Bi solder joints with Au/Ni/Cu pads, J. Alloys Compd., 491, 610, 10.1016/j.jallcom.2009.11.017 Huang, 2011, Effects of Co alloying and size on solidification and interfacial reactions in Sn-57 wt.%Bi-(Co)/Cu couples, J. Electron. Mater., 40, 62, 10.1007/s11664-010-1386-y Lin, 2014, Effective suppression of interfacial intermetallic compound growth between Sn–58 wt.% Bi solders and Cu substrates by minor Ga addition, J. Alloys Compd., 586, 319, 10.1016/j.jallcom.2013.10.035 Morris, 1993, Microstructure and mechanical properties of Sn-In and Sn-Bi solders, J. Miner. Met. Mater. Soc., 45, 25, 10.1007/BF03222376 Okamoto, 1990, Binary alloy phase diagrams, ASM Int., Met.Park, 3, 2295 Selah, 2000, Low temperature fluxless bonding technique using In-Sn composite, 114 Kubiak, 1979, Crystallization, decomposition and superconductivity of β-In3Sn, J. Less Common. Met., 65, 263, 10.1016/0022-5088(79)90116-4 Chriašteľová, 2008, Properties of solders with low melting point, J. Alloys Compd., 457, 323, 10.1016/j.jallcom.2007.03.062 Freer, 1992, Microstructure and creep of eutectic indium/tin on copper and nickel substrates, J. Electron. Mater., 21, 647, 10.1007/BF02655434 Shobo, 2018, Rapid thermal cycling of three phase change materials (PCMs) for cooking applications, J. Braz. Soc. Mech. Sci. Eng., 40, 329, 10.1007/s40430-018-1253-y El-Bediwi, 2004, Influence of silver on structural, electrical, mechanical and soldering properties of tin-indium based alloys, Radiat. Eff. Defects Solids, 159, 133, 10.1080/10420150410001670288 Sommadossi, 2007, Interface reaction systematics in the Cu/In–48Sn/Cu system bonded by diffusion soldering, Intermetallics, 15, 912, 10.1016/j.intermet.2006.10.050 Tian, 2018, The interfacial reaction between In-48Sn solder and polycrystalline Cu substrate during solid state aging, J. Alloys Compd., 740, 500, 10.1016/j.jallcom.2017.12.355 Kim, 2005, Interfacial reactions and growth kinetics for intermetallic compound layer between In–48Sn solder and bare Cu substrate, J. Alloys Compd., 386, 151, 10.1016/j.jallcom.2004.05.055 Vianco, 1994, Intermetallic compound layer formation between copper and hot-dipped 100In, 50In-50Sn, 100Sn, and 63Sn-37Pb coatings, J. Electron. Mater., 23, 583, 10.1007/BF02653343 Chuang, 2002, Phase identification and growth kinetics of the intermetallic compounds formed during In-49Sn/Cu soldering reactions, J. Electron. Mater., 31, 640, 10.1007/s11664-002-0136-1 Koo, 2005, Reliability of In-48Sn solder/Au/Ni/Cu BGA packages during reflow process, J. Electron. Mater., 34, 1565, 10.1007/s11664-005-0166-6 Humpston, 2005, Indium solders, Adv. Mater. Process., 163, 45 Goldstein, 1994, Microstructural development of eutectic Bi-Sn and eutectic In-Sn during high temperature deformation, J. Electron. Mater., 23, 477, 10.1007/BF02671233 Shimizu, 1995, Solder joint reliability of indium-alloy interconnection, J. Electron. Mater., 24, 39, 10.1007/BF02659725 Eckert, 1952, Diffusion in indium near the melting point, J. Chem., 20, 13 Meakin, 1960, Self-diffusion in tin single crystals, Trans. Met. Soc. AIME, 218, 463 Coston, 1964, Self-diffusion in tin at high pressure, J. Phys. Chem., 68, 2219, 10.1021/j100790a032 Seyyedi, 1993, Thermal fatigue behaviour of low melting point solder joints, Solder. Surf. Mt. Technol., 5, 26, 10.1108/eb037812 Marshall, 1987, Fatigue of solders, Int. J. Microcircuits Electron. Packag., 10, 11 Cheong, 2004, Reliable bonding using indium-based solders, Proc. Spie Int. Soc. Opt. Eng., 5343, 114 Kim, 2005, Characterization of the shear test method with low melting point In–48Sn solder joints, Mater. Sci. Eng. A, 397, 145, 10.1016/j.msea.2005.02.040 Koo, 2007, Effect of surface finish of substrate on mechanical reliability of In-48Sn solder joints in MOEMS package, Microsyst. Technol., 13, 1567, 10.1007/s00542-006-0344-3 Koo, 2008, Interfacial reactions and mechanical properties of In–48Sn solder joint with electroplated Au/Ni ball grid array (BGA) substrate after multiple reflows, J. Mater. Res., 23, 1631, 10.1557/JMR.2008.0223 Daghfal, 2007, Current-induced phase partitioning in eutectic indium-tin Pb-free solder interconnect, J. Electron. Mater., 36, 1372, 10.1007/s11664-007-0206-5 Li, 2016, Phase segregation, interfacial intermetallic growth and electromigration-induced failure in Cu/In–48Sn/Cu solder interconnects under current stressing, J. Alloys Compd., 673, 372, 10.1016/j.jallcom.2016.02.244 Li, 2015, Electromigration in eutectic In-48Sn ball grid array (BGA) solder interconnections with Au/Ni/Cu pads, J. Mater. Sci. Mater. Electron., 26, 8522, 10.1007/s10854-015-3524-z Hansen, 1958 Han, 2020, Microstructure and mechanical properties of the In–48Sn–xAg low-temperature alloy, J. Mater. Sci. Wang, 2019, Effect of zinc addition on the microstructure, thermal and mechanical properties of indium-tin-xZinc alloys, J. Electron. Mater., 48, 817, 10.1007/s11664-018-6768-6 Lin, 2014, Effects of zinc on the interfacial reactions of tin–indium solder joints with copper, J. Mater. Sci., 49, 3805, 10.1007/s10853-014-8092-8 Lin, 2015, Solid-state reactions between Sn-20.0 wt.%In-x wt.%Zn solders and Ag and Ni substrates, Mater. Chem. Phys., 154, 60, 10.1016/j.matchemphys.2015.01.045 Kabassis, 1986, Phase relationships in Bi–In–Sn alloy system, Mater. Sci. Technol., 2, 985, 10.1179/mst.1986.2.10.985 Witusiewicz, 2017, Thermodynamic re-optimisation of the Bi–In–Sn system based on new experimental, J. Alloys Compd., 428, 115, 10.1016/j.jallcom.2006.03.050 Witusiewicz, 2005, In situ observation of microstructure evolution in low-melting Bi–In–Sn alloys by light microscopy, Acta Mater., 53, 3663, 10.1016/j.actamat.2005.04.015 Mei, 1996, Low-temperature solders, Hewlett Packard J., 47, 91 Yoon, 1990, Investigation of the phase equilibria in the Sn-Bi-In alloy system, Metall. Mater. Trans. A, 30, 1503, 10.1007/s11661-999-0087-8 Nguyen, 2017, Microstructure and mechanical behavior of low-melting point Bi-Sn-In solder joints, Electron. Mater. Lett., 13, 420, 10.1007/s13391-017-1614-1 Huang, 2013, Interfacial microstructure and mechanical properties of In–Bi–Sn lead-free solder, J. Mater. Sci. Mater. Electron., 24, 2624, 10.1007/s10854-013-1143-0 Noor, 2008, Characteristic of low temperature of Bi-In-Sn solder alloy, 1 Yeh, 1982, Characterization of In-based eutectic alloys used in Josephson packaging, Metall. Trans. A, 13, 1547, 10.1007/BF02644794 Fujiwara, 1987, Characterization of intermetallic compound formation on In/Bi/Sn solder bumps used in Pb-alloy Josephson chip packaging, IEEE Trans. Compon. Hybrids, Manuf. Technol., 10, 263, 10.1109/TCHMT.1987.1134729 Mousavi, 2016, Phase evolution of superconducting Sn–In–Bi solder alloys, IEEE Trans. Appl. Supercond., 26, 1, 10.1109/TASC.2016.2514843 Çadırlı, 2009, The effect of growth rate on microstructure and microindentation hardness in the In–Bi–Sn ternary alloy at low melting point, J. Alloys Compd., 470, 150, 10.1016/j.jallcom.2008.02.056 Noor, 2010, Wettability and strength of In–Bi–Sn lead-free solder alloy on copper substrate, J. Alloys Compd., 507, 290, 10.1016/j.jallcom.2010.07.182 Li, 2016, Characterization of low-melting-point Sn-Bi-In lead-free solders, J. Electron. Mater., 45, 5800, 10.1007/s11664-016-4366-z Wu, 2009, Formation of intermetallic compounds in SnAgBiIn solder systems on Cu substrates, J. Alloys Compd., 476, 436, 10.1016/j.jallcom.2008.09.001 Kim, 2007, Properties of low temperature Sn–Ag–Bi–In solder systems, Microelectron. Reliab., 47, 1113, 10.1016/j.microrel.2006.06.012 Pu, 2020, Effect of adding Ag to the medium entropy SnBiIn alloy on intermetallic compound formation, Mater. Lett., 272, 127891, 10.1016/j.matlet.2020.127891 Liu, 2020, Ultra-thin intermetallic compound formation in microbump technology by the control of a low Zn concentration in solder, Materialia, 100791, 10.1016/j.mtla.2020.100791