Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection

R. Das, P. Harrop, Printed, organic & flexible electronics: forecasts, players & opportunities 2013–2023, IDTechEx Report, 2013.

Timpanaro, 2004, Morphology and conductivity of PEDOT/PSS films studied by scanning–tunneling microscopy, Chem. Phys. Lett., 394, 339, 10.1016/j.cplett.2004.07.035

Nardes, 2008, Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol, Org. Electron., 9, 727, 10.1016/j.orgel.2008.05.006

Wu, 2014, Flexible organic light emitting diodes based on double-layered graphene/PEDOT:PSS conductive film formed by spray-coating, Vacuum, 101, 53, 10.1016/j.vacuum.2013.07.034

Ko, 2010, Graphene-based nitrogen dioxide gas sensors, Curr. Appl. Phys., 10, 1002, 10.1016/j.cap.2009.12.024

Yoon, 2011, Carbon dioxide gas sensor using a graphene sheet, Sens. Actuators, B, 157, 310, 10.1016/j.snb.2011.03.035

Hong, 2008, Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cells, Electrochem. Commun., 10, 1555, 10.1016/j.elecom.2008.08.007

Wisitsoraat, 2013, Graphene–PEDOT:PSS on screen printed carbon electrode for enzymatic biosensing, J. Electroanal. Chem., 704, 208, 10.1016/j.jelechem.2013.07.012

Sriprajuabwong, 2012, Inkjet-printed graphene–PEDOT:PSS modified screen printed carbon electrode for biochemical sensing, J. Mater. Chem., 22, 5478, 10.1039/c2jm14005e

Karuwan, 2012, Inkjet-printed graphene–poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) modified on screen printed carbon electrode for electrochemical sensing of salbutamol, Sens. Actuators, B, 161, 549, 10.1016/j.snb.2011.10.074

Lu, 2013, A facile one-step redox route for the synthesis of graphene/poly(3,4ethylenedioxythiophene) nanocomposite and their applications in biosensing, Sens. Actuators, B, 181, 567, 10.1016/j.snb.2013.02.024

Xu, 2009, A hybrid material of graphene and poly(3,4-ethyldioxythiophene) with high conductivity, flexibility, and transparency, Nano Res., 2, 343, 10.1007/s12274-009-9032-9

Huang, 2011, Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors, Nano Res., 4, 675, 10.1007/s12274-011-0123-z

Ferroni, 1997, Gas-sensing applications of W–Ti–O-based nanosized thin films prepared by r.f. reactive sputtering, Sens. Actuators, B, 44, 499, 10.1016/S0925-4005(97)00173-1

Katti, 2003, Mechanism of drifts in H2S sensing properties of SnO2:CuO composite thin film sensors prepared by thermal evaporation, Sens. Actuators, B, 96, 245, 10.1016/S0925-4005(03)00532-X

Bae, 1999, Electrical and reducing gas sensing properties of ZnO and ZnO–CuO thin films fabricated by spin coating method, Sens. Actuators, B, 55, 47, 10.1016/S0925-4005(99)00038-6

Liu, 2005, A highly sensitive and fast-responding SnO2 sensor fabricated by combustion chemical vapor deposition, Chem. Mater., 17, 3997, 10.1021/cm050451o

Martinelli, 1999, Screen-printed perovskite-type thick films as gas sensors for environmental monitoring, Sens. Actuators, B, 55, 99, 10.1016/S0925-4005(99)00054-4

Wongchoosuk, 2012, Novel flexible NH3 gas sensor prepared by ink-jet printing technique, Adv. Mater. Res., 506, 39, 10.4028/www.scientific.net/AMR.506.39

Singh, 2010, Inkjet printing-process and its applications, Adv. Mater., 22, 673, 10.1002/adma.200901141

Mabrook, 2006, Inkjet-printed polymer films for the detection of organic vapors, IEEE Sens. J., 6, 1435, 10.1109/JSEN.2006.884168

Kim, 2002, Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents, Synth. Met., 126, 311, 10.1016/S0379-6779(01)00576-8

Mabrook, 2005, An inkjet-printed chemical fuse, Appl. Phys. Lett., 86, 013507, 10.1063/1.1846950

Yue, 2013, Functionalized graphene/poly(3,4ethylenedioxythiophene)-polystyrenesulfonate as counter electrode catalyst for dye-sensitized solar cells, Energy, 54, 315, 10.1016/j.energy.2013.01.037

Kim, 2011, Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells, Adv. Funct. Mater., 21, 1076, 10.1002/adfm.201002290

Nemade, 2013, LPG sensing application of graphene/Bi2O3 quantum dots composites, Solid State Sci., 22, 27, 10.1016/j.solidstatesciences.2013.05.008

Kim, 2012, Thermoelectric properties of nanocomposite thin films prepared with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) and graphene, Phys. Chem. Chem. Phys., 14, 3530, 10.1039/c2cp23517j

Alexandre, 2000, Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials, Mater. Sci. Eng., 28, 1, 10.1016/S0927-796X(00)00012-7

Xiong, 2013, Conductivities enhancement of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) transparent electrodes with diol additives, Polym. Bull., 70, 237, 10.1007/s00289-012-0833-8

Sakamoto, 2005, Raman spectral changes of PEDOT–PSS in polymer light-emitting diodes upon operation, Chem. Phys. Lett., 412, 395, 10.1016/j.cplett.2005.07.040

Farah, 2012, Conductivity enhancement of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) films post-spincasting, J. Appl. Phys., 112, 113709, 10.1063/1.4768265

Barba, 2010, Surface-enhanced raman study of the interaction of PEDOT:PSS with plasmonically active nanoparticles, J. Phys. Chem. C, 114, 6822, 10.1021/jp100135x

Ni, 2008, Raman spectroscopy and imaging of graphene, Nano Res., 1, 273, 10.1007/s12274-008-8036-1

Ferrari, 2006, Raman spectrum of graphene and graphene layers, Phys. Rev. Lett., 97, 187401, 10.1103/PhysRevLett.97.187401

Ghadim, 2013, Adsorption properties of tetracycline onto graphene oxide: equilibrium, kinetic and thermodynamic studies, PLoS ONE, 8, e79254, 10.1371/journal.pone.0079254

Weng, 2014, Mass production of carbon nanotube-reinforced polyacrylonitrile fine composite fibers, J. Appl. Polym. Sci., 131, 40302, 10.1002/app.40302

Chu, 2012, Synthesis of PEDOT-modified graphene composite materials as flexible electrodes for energy storage and conversion applications, Int. J. Hydrogen Energy, 37, 13880, 10.1016/j.ijhydene.2012.05.017

Acik, 2010, Unusual infrared-absorption mechanism in thermally reduced graphene oxide, Nat. Mater., 9, 840, 10.1038/nmat2858

Stankovich, 2006, Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets, Carbon, 44, 3342, 10.1016/j.carbon.2006.06.004

Karuwan, 2012, Inkjet-printed graphene–poly(3,4ethylenedioxythiophene):poly(styrene-sulfonate) modified on screen printed carbon electrode for electrochemical sensing of salbutamol, Sens. Actuators, B, 161, 549, 10.1016/j.snb.2011.10.074

Mandal, 2012, Noncovalent functionalization of multiwalled carbon nanotube by a polythiophene-based compatibilizer: reinforcement and conductivity improvement in poly(vinylidene fluoride) films, J. Phys. Chem. C, 116, 9360, 10.1021/jp302027y

Si, 2012, Electrodeposition of graphene oxide doped poly(3,4-ethylenedioxythiophene) film and its electrochemical sensing of catechol and hydroquinone, Electrochim. Acta, 85, 295, 10.1016/j.electacta.2012.08.099

Ricardo, 2014, Surfactant-free exfoliation of graphite in aqueous solutions, Chem. Commun., 50, 2751, 10.1039/c3cc49273g

Sun, 2012, Improvement in the photovoltaic efficiency of polymer solar cells by treating the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer with co-solvents of hydrophilic organic solvents and hydrophobic 1,2-dichlorobenzene, Sol. Energy Mater. Sol. C, 97, 89, 10.1016/j.solmat.2011.09.039

Trang, 2012, Preparation and characterization of graphene composites with conducting polymers, Polym. Int., 61, 93, 10.1002/pi.3152

Suchea, 2006, Low temperature indium oxide gas sensors, Sens. Actuators, B, 118, 135, 10.1016/j.snb.2006.04.020

Romero, 2009, Adsorption of ammonia on graphene, Nanotechnology, 20, 245501, 10.1088/0957-4484/20/24/245501

Huang, 2012, Reduced graphene oxide–polyaniline hybrid: Preparation, characterization and its applications for ammonia gas sensing, J. Mater. Chem., 22, 22488, 10.1039/c2jm34340a

Lina, 2009, Using a PEDOT:PSS modified electrode for detecting nitric oxide gas, Sens. Actuators, B, 140, 402, 10.1016/j.snb.2009.04.041

Bai, 2007, Gas sensors based on conducting polymers, Sensors, 7, 267, 10.3390/s7030267

Weber, 1970, Room-temperature chemisorption mechanism of oxygen at CdS surfaces by photoconductivity investigations, Phys. Status Solidi, 1, 665, 10.1002/pssa.19700010405

Gautam, 2012, Ammonia gas sensing behavior of graphene surface decorated with gold nanoparticles, Solid State Electron., 78, 159, 10.1016/j.sse.2012.05.059

Wu, 2013, Enhanced sensitivity of ammonia sensor using graphene/polyaniline nanocomposite, Sens. Actuators, B, 178, 485, 10.1016/j.snb.2013.01.014

Kwon, 2010, Novel flexible chemical gas sensor based on poly(3,4-ethylene dioxythiophene) nanotube membrane, Talanta, 82, 1338, 10.1016/j.talanta.2010.06.058

Jian, 2013, Gas-sensing characteristics of dielectrophoretically assembled composite film of oxygen plasma-treated SWCNTs and PEDOT/PSS polymer, Sens. Actuators, B, 178, 279, 10.1016/j.snb.2012.12.085

Crispin, 2003, Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)–poly(styrenesulfonate): a photoelectron spectroscopy study, J. Polym. Sci. B: Polym. Phys., 41, 2525, 10.1002/polb.10659