Low-bandgap conjugated polymers enabling solution-processable tandem solar cells

Chapin, D. M., Fuller, C. S. & Pearson, G. L. A. New silicon p–n junction photocell for converting solar radiation into electrical power. J. Appl. Phys. 25, 676–677 (1954).

Shockley, W. & Queisser, H. J. Detailed balance limit of efficiency of p–n junction solar cells. J. Appl. Phys. 32, 510–519 (1961). This is the classic paper on the theoretical thermodynamic efficiency limit in solar cells.

Miller, O. D., Yablonovitch, E. & Kurtz, S. R. Strong internal and external luminescence as solar cells approach the Shockley–Queisser efficiency limit. J. Photovolt. 2, 303–311 (2012).

International Energy Agency. Snapshot of Global Photovoltaic Markets 2016 Report IEA PVPS T1-31:2017 (IEA, 2017).

Gunes, S., Neugebauer, H. & Sariciftci, N. S. Conjugated polymer-based organic solar cells. Chem. Rev. 107, 1324–1338 (2007).

Chen, L.-M., Hong, Z., Li, G. & Yang, Y. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells. Adv. Mater. 21, 1434–1449 (2009).

Lu, L. et al. Recent advances in bulk heterojunction polymer solar cells. Chem. Rev. 115, 12666–12731 (2015).

Li, G., Zhu, R. & Yang, Y. Polymer solar cells. Nat. Photonics 6, 153–161 (2012).

Li, G. et al. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nat. Mater. 4, 864–868 (2005). Representative report on the understanding and control of bulk heterojunction morphology in a classical P3HT:PCBM polymer solar cell with high efficiency.

Peet, J. et al. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. Nat. Mater. 6, 497–500 (2007). Low-bandgap (∼1.4-eV) polymer solar cell reaching 5.5% achieved using an important solvent additive approach.

Heeger, A. J. Semiconducting polymers: the third generation. Chem. Soc. Rev. 39, 2354–2371 (2010).

Bässler, H. & Köhler, A. Charge transport in organic semiconductors. Top. Curr. Chem. 312, 1–65 (2012).

Tang, C. W. Multilayer organic photovoltaic elements. US patent 4164431A (1979).

Tang, C. W. 2-Layer organic photovoltaic cell. Appl. Phys. Lett. 48, 183–185 (1986).

Sariciftci, N. S., Smilowitz, L., Heeger, A. J. & Wudl, F. Photoinduced electron-transfer from a conducting polymer to buckminsterfullerene. Science 258, 1474–1476 (1992).

Yu, G., Gao, J., Hummelen, J. C., Wudl, F. & Heeger, A. J. Polymer photovoltaic cells — enhanced efficiencies via a network of internal donor–acceptor heterojunctions. Science 270, 1789–1791 (1995). This paper is the starting point of bulk heterojunction organic solar cells.

Halls, J. J. M. et al. Efficient photodiodes from interpenetrating polymer networks. Nature 376, 498–500 (1995).

King, R. et al. Band gap–voltage offset and energy production in next-generation multijunction solar cells. Prog. Photovoltaics 19, 797–812 (2011).

Zhou, Z.-H. et al. Unique optical and electrochemical properties of π-conjugated electrically conducting copolymers consisting of electron-withdrawing pyridine units and electron-donating thiophene units. J. Chem. Soc. Chem. Commun. 1991, 1210–1212 (1991).

Havinga, E. E. et al. Alternate donor–acceptor small-band-gap semiconducting polymers: polysquaraines and polyconaines. Synth. Met. 55, 299 (1993).

Havinga, E. E. et al. A new class of small bandgap organic polymer conductors. Polym. Bull. 29, 119–126 (1992).

Kitamura, C. et al. Design of narrow-bandgap polymers. Syntheses and properties of monomers and polymers containing aromatic-donor and o-quinoid-acceptor units. Chem. Mater. 8, 570–578 (1996).

Yamamoto, T. et al. π-Conjugated donor–acceptor copolymers constituted of π-excessive and π-deficient arylene units. optical and electrochemical properties in relation to CT structure of the polymer. J. Am. Chem. Soc. 118, 10389–10399 (1996).

Brédas, J. L. Relationship between bandgap and bond length alternation in organic conjugated polymers. J. Chem. Phys. 82, 3808 (1985).

Brocks, G. & Tol, A. Small band gap semiconducting polymers made from dye molecules: polysquaraines. J. Phys. Chem. 100, 1838–1846 (1996).

Cheng, Y.-J., Yang, S. H. & Hsu, C. S. Synthesis of conjugated polymers for organic solar cell applications. Chem. Rev. 109, 5868–5923 (2009).

Gibson, G. L., McCormick, T. M. & Seferos, D. S. Atomistic band gap engineering in donor–acceptor polymers. J. Am. Chem. Soc. 134, 539–547 (2012).

Yuen, J. D. & Wudl, F. Strong acceptors in donor–acceptor polymers for high performance thin film transistors. Energy Environ. Sci. 6, 392–406 (2013).

Cheng, Y. J. & Luh, T.-Y. Synthesizing optoelectronic heteroaromatic conjugated polymers by cross-coupling reactions. J. Organomet. Chem. 689, 4137–4148 (2004).

Dou, L. et al. 25th anniversary article: a decade of organic/polymeric photovoltaic research. Adv. Mater. 25, 6642–6671 (2013).

Dou, L., Liu, Y. S., Hong, Z., Li, G. & Yang, Y. Low-bandgap near-IR conjugated polymers/ molecules for organic electronics. Chem. Rev. 115, 12633–12665 (2015).

Mu¨hlbacher, D. et al. High photovoltaic performance of a low-bandgap polymer. Adv. Mater. 18, 2884–2889 (2006).

Chen, H. Y. et al. Silicon atom substitution enhances interchain packing in a thiophene-based polymer system. Adv. Mater. 22, 371–375 (2010).

Scharber, M. C. et al. Influence of the bridging atom on the performance of a low-bandgap bulk heterojunction solar cell. Adv. Mater. 22, 367–370 (2010).

Hou, J. H., Chen, H.-Y., Zhang, S.-Q., Li, G. & Yang, Y. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole. J. Am. Chem. Soc. 130, 16144–16145 (2008).

Kim, J. S. et al. Germanium- and silicon-substituted donor–acceptor type copolymers: effect of the bridging heteroatom on molecular packing and photovoltaic device performance. Adv. Energy Mater. 4, 1400527 (2014).

Dou, L. et al. Synthesis of 5H-dithieno[3,2-b:2’,3′-d]pyran as an electron-rich building block for donor–acceptor type low-bandgap polymers. Macromolecules 46, 3384–3390 (2013).

Liu, Y. et al. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells. Nat. Commun. 5, 5293 (2014).

Zhao, J. et al. Efficient organic solar cells processed from hydrocarbon solvents. Nat. Energy 1, 15027 (2016). Single-junction polymer solar cell breaks 11% efficiency barrier.

Bijleveld, J. C. et al. Poly(diketopyrrolopyrrole–terthiophene) for ambipolar logic and photovoltaics. J. Am. Chem. Soc. 131, 16616–16617 (2009).

Hendriks, K. H., Heintges, G. H. L., Gevaerts, V. S., Wienk, M. M. & Janssen, R. A. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells. Angew. Chem. Int. Ed. 52, 8341–8344 (2013).

Dou, L. et al. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer. Nat. Photonics 6, 180–185 (2012).

Dou, L. et al. A selenium-substituted low-bandgap polymer with versatile photovoltaic applications. Adv. Mater. 25, 825–831 (2013).

Meager, I. et al. Photocurrent enhancement from diketopyrrolopyrrole polymer solar cells through alkyl-chain branching point manipulation. J. Am. Chem. Soc. 135, 11537–11540 (2013).

Ashraf, R. S. et al. Chalcogenophene comonomer comparison in small band gap diketopyrrolopyrrole-based conjugated polymers for high-performing field-effect transistors and organic solar cells. J. Am. Chem. Soc. 137, 1314–1321 (2015).

Hendriks, K. H., Li, W. W., Wienk, M. M. & Janssen, R. A. J. Small-bandgap semiconducting polymers with high near-infrared photoresponse. J. Am. Chem. Soc. 136, 12130–12136 (2014).

Ma, T. et al. Efficient low-bandgap polymer solar cells with high open-circuit voltage and good stability. Adv. Energy Mater. 5, 1501282 (2015).

Gao, J. et al. Elucidating double aggregation mechanisms in the morphology optimization of diketopyrrolopyrrole-based narrow bandgap polymer solar cells. Adv. Mater. 26, 3142–3147 (2014).

Gao, J. et al. Improving structural order for a high-performance diketopyrrolopyrrole-based polymer solar cell with a thick active layer. Adv. Energy Mater. 4, 1300739 (2013).

Liang, Y. et al. For the bright future — bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%. Adv. Mater. 22, 135–138 (2010). PTB polymers reach NREL-certified 7.4% PCE in conventional configuration. PTB7 polymer is still one of the champion polymers in the field.

Liang, Y. et al. Development of new semiconducting polymers for high performance solar cells. J. Am. Chem. Soc. 131, 56–57 (2009).

Hou, J. et al. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene. Macromolecules 41, 6012–6018 (2008).

Liang, Y. et al. Highly efficient solar cell polymers developed via fine tuning of structural and electronic properties. J. Am. Chem. Soc. 131, 7792–7799 (2009).

Chen, H. Y. et al. Polymer solar cells with enhanced open-circuit voltage and efficiency. Nat. Photonics 3, 649–653 (2009).

Lu, L. & Yu, L. P. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it. Adv. Mater. 26, 4413–4430 (2014).

Hou, J. et al. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells. J. Am. Chem. Soc. 131, 15586–15587 (2009).

Liao, S.-H., Jhuo, H.-J., Cheng, Y.-S. & Chen, S.-A. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance. Adv. Mater. 25, 4766–4771 (2013).

He, Z. et al. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat. Photonics 6, 591–595 (2012).

He, Z. et al. Single-junction polymer solar cells with high efficiency and photovoltage. Nat. Photonics 9, 174–179 (2015). Interface engineering leads to a PCE of over 10% for a single-junction polymer solar cell using an inverted configuration and a PTB series polymer.

Zhang, W., Min, C., Zhang, Q., Li, X. & Fang, J. Zwitterionic ammonium and neutral amino molecules as cathode interlayer for inverted polymer solar cells. Org. Electron. 15, 3632–3638 (2014).

Ouyang, X., Peng, R., Ling, A., Zhang, X. & Ge, Z. Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte. Nat. Photonics 9, 520–524 (2015).

Chang, W.-H. et al. A selenophene containing benzodithiophene-alt-thienothiophene polymer for additive-free high performance solar cell. Macromolecules 48, 562–568 (2015).

van Franeker, J. J., Turbiez, M., Li, W. W., Wienk, M. M. & Janssen, R. A. J. A real-time study of the benefits of co-solvents in polymer solar cell processing. Nat. Commun. 6, 6229 (2015).

Cui, C. et al. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution. Energy Environ. Sci. 7, 2276–2284 (2014).

Chen, M. S. et al. Control of polymer-packing orientation in thin films through synthetic tailoring of backbone coplanarity. Chem. Mater. 25, 4088–4096 (2013).

Koizumi, Y. et al. Thienoisoindigo-based low-band gap polymers for organic electronic devices. Polym. Chem. 4, 484–494 (2013).

Zou, Y. et al. A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells. J. Am. Chem. Soc. 132, 5330–5331 (2010).

Zhang, Y. et al. Efficient polymer solar cells based on the copolymers of benzodithiophene and thienopyrroledione. Chem. Mater. 22, 2696–2698 (2010).

Piliego, C. et al. Synthetic control of structural order in N-alkylthieno[3,4-c]pyrrole-4,6-dione-based polymers for efficient solar cells. J. Am. Chem. Soc. 132, 7595–7597 (2010).

Chu, T. Y. et al. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno [3,2-b: 2′,3′-d]silole copolymer with a power conversion efficiency of 7.3%. J. Am. Chem. Soc. 133, 4250 (2011).

Amb, C. M. et al. Dithienogermole as a fused electron donor in bulk heterojunction solar cells. J. Am. Chem. Soc. 133, 10062–10065 (2011).

Small, C. E. et al. High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells. Nat. Photonics 6, 115–120 (2012).

Wen, W. et al. Regioregular pyridyl[2,1,3]thiadiazole-co-indacenodithiophene conjugated polymers. Chem. Commun. 49, 7192–7194 (2013).

Ying, L. et al. Regioregular pyridyl[2,1,3]thiadiazole-π-conjugated copolymers. J. Am. Chem. Soc. 133, 18538–18541 (2011).

Steckler, T. T. et al. Very low bandgap thiadiazoloquinoxaline donor–acceptor polymers as multi-tool conjugated polymers. J. Am. Chem. Soc. 136, 1190–1193 (2014).

Yan, H. et al. A high-mobility electron-transporting polymer for printed transistors. Nature 457, 679–686 (2009).

Gao, L. et al. All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%. Adv. Mater. 28, 1884–1890 (2016).

Friedman, D. J., Olson, J. M. & Kurtz, S. in Handbook of Photovoltaic Science and Engineering 2nd edn, Ch. 8 (eds Luque, A. & Hegedus, S. ) 314–364 (Wiley, 2011).

Olson, J. M., Gessert, T. & Al-Jassim, M.M. Proc. 18th IEEE Photovoltaic Specialists Conf. Las Vegas, 21–25 October, 552–555 (IEEE, 1985).

Shrotriya, V., Wu, E. H.-E., Li, G., Yao, Y. & Yang, Y. Efficient light harvesting in multiple-device stacked structure for polymer solar cells. Appl. Phys. Lett. 88, 064104 (2006).

Kawano, K., Ito, N., Nishimori, T. & Sakai, J. Open circuit voltage of stacked bulk heterojunction organic solar cells. Appl. Phys. Lett. 88, 073514 (2006).

Tung, V. C., Kim, J., Cote, L. J. & Huang, J. X. Sticky interconnect for solution-processed tandem solar cells. J. Am. Chem. Soc. 133, 9262–9265 (2011).

Sun, X. W. et al. Inverted tandem organic solar cells with a MoO3/Ag/Al/CaMoO3/Ag/Al/Ca intermediate layer. Appl. Phys. Lett. 97, 053303 (2010).

Puetz, A. et al. Solution processable, precursor based zinc oxide buffer layers for 4.5% efficient organic tandem solar cells. Org. Electron. 13, 2696–2701 (2012).

Hadipour, A. et al. Solution-processed organic tandem solar cells. Adv. Funct. Mater. 16, 1897–1903 (2006).

Lee, K. et al. Air-stable polymer electronic devices. Adv. Mater. 19, 2445–2449 (2007).

Gilot, J., Barbu, I., Wienk, M. M. & Janssen, R. A. J. The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study. Appl. Phys. Lett. 91, 113520 (2007).

Kim, J. Y. et al. Efficient tandem polymer solar cells fabricated by all-solution processing. Science 317, 222–225 (2007). Influential report on high-efficiency, all-solution-processed tandem polymer solar cells.

Park, M.-H., Li, J.-H., Kumar, A., Li, G. & Yang, Y. Doping of the metal oxide nanostructure and its influence in organic electronics. Adv. Funct. Mater. 19, 1241–1246 (2009).

Sista, S. et al. Highly efficient tandem polymer photovoltaic cells. Adv. Mater. 22, 380 (2010).

Yang, J. et al. A robust inter-connecting layer for achieving high performance tandem polymer solar cells. Adv. Mater. 23, 3465–3470 (2011).

Gilot, J., Wienk, M. M. & Janssen, R. A. J. Double and triple junction polymer solar cells processed from solution. Appl. Phys. Lett. 90, 143512 (2007).

Li, W. W., Furlan, A., Hendriks, K. H., Wienk, M. M. & Janssen, R. A. J. Efficient tandem and triple-junction polymer solar cells. J. Am. Chem. Soc. 135, 5529–5532 (2013).

Shrotriya, V., Li, G., Yao, Y., Chu, C. W. & Yang, Y. Transition metal oxides as the buffer layer for polymer photovoltaic cells. Appl. Phys. Lett. 88, 073508 (2006).

Li, G., Chu, C. W., Shrotriya, V., Huang, J. & Yang, Y. Efficient inverted polymer solar cells. Appl. Phys. Lett. 88, 253503 (2006). Early report on polymer solar cells with an inverted configuration using interface layers to modify the work function of the electrode.

Janssen, A. G. F., Riedl, T., Hamwi, S., Johannes, H.-H. & Kowalsky, W. Highly efficient organic tandem solar cells using an improved connecting architecture. Appl. Phys. Lett. 91, 073519 (2007).

White, M. S., Olson, D. C., Shaheen, S. E., Kopidakis, N. & Ginley, D. S. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer. Appl. Phys. Lett. 89, 143517 (2006).

Chou, C. H., Kwan, W. L., Hong, Z., Chen, L.-M. & Yang, Y. Metal–oxide interconnection layer for polymer tandem solar cells with an inverted architecture. Adv. Mater. 23, 1282–1286 (2011).

You, J. et al. A polymer tandem solar cell with 10.6% power conversion efficiency. Nat. Commun. 4, 1446 (2013). An all-solution-processed inverted tandem polymer solar cell achieves NREL-certified 10.6% efficiency.

Li, N. et al. Design of the solution-processed intermediate layer by engineering for inverted organic multi junction solar cells. Adv. Energy Mater. 3, 301–307 (2013).

Chen, C.-C. et al. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%. Adv. Mater. 26, 5670–5677 (2014).

Yusoff, A. R. M. et al. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%. Energy Environ. Sci. 8, 303–316 (2015).

You, J. B. et al. 10.2% power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells. Adv. Mater. 25, 3973–3978 (2013).

Yuan, J. et al. High efficiency all-polymer tandem solar cells. Sci. Rep. 6, 26459 (2016).

Liu, W. et al. Nonfullerene tandem organic solar cells with high open-circuit voltage of 1.97 V. Adv. Mater. 28, 9729–9734 (2016).

Luque, A. & Hegedus, S. Handbook of Photovoltaic Science and Engineering (Wiley, 2003).

Shah, A. Thin-film Silicon Solar Cells (EPFL, 2010).

Kim, T. et al. Organic–inorganic hybrid tandem multijunction photovoltaics with extended spectral response. Appl. Phys. Lett. 98, 183503 (2011).

Pattnaik, S., Xiao, T., Shinar, R., Shinar, J. & Dalal, V. L. Novel hybrid amorphous/organic tandem junction solar cell. IEEE J. Photovolt. 3, 295–299 (2013).

Albrecht, S. et al. Efficient hybrid inorganic/organic tandem solar cells with tailored recombination contacts. Sol. Energy Mater. Sol. Cells 127, 157–162 (2014).

Qin, W. et al. High efficiency organic/a-Si hybrid tandem solar cells with complementary light absorption. J. Mater. Chem. A. 2, 15303–15307 (2014).

Kim, J. et al. 10.5% efficient polymer and amorphous silicon hybrid tandem photovoltaic cell. Nat. Commun. 6, 6391 (2015).

Roland, S. et al. Hybrid organic/inorganic thin-film multijunction solar cells exceeding 11% power conversion efficiency. Adv. Mater. 27, 1262–1267 (2016).

Ameri, T., Dennler, G., Lungenschmided, C. & Brabec, C. J. Organic tandem solar cells: a review. Energy Environ. Sci. 2, 347–363 (2009).

Yang, M. Y. et al. High-performance multiple-donor bulk heterojunction solar cells. Nat. Photonics 9, 190–198 (2015).

Zhang, Y. et al. Synergistic effect of polymer and small molecules for high performance ternary organic solar cells. Adv. Mater. 27, 1071–1076 (2015).

Honda, S., Ohkita, H., Benten, H. & Ito, S. Multi-colored dye sensitization of polymer/fullerene bulk heterojunction solar cells. Chem. Commun. 46, 6596–6598 (2010).

Lu, L., Xu, T., Chen, W., Landry, E. S. & Yu, L. Ternary blend polymer solar cells with enhanced power conversion efficiency. Nat. Photonics 8, 716–722 (2014).

Itskos, G. et al. Optical properties of organic semiconductor blends with near-infrared quantum-dot sensitizers for light harvesting applications. Adv. Energy Mater. 1, 802–812 (2011).

Ameri, T., Khoram, P., Min, J. & Brabec, C. J. Organic ternary solar cells: a review. Adv. Mater. 25, 4245–4266 (2013).

Yang, L., Yan, L. & You, W. Organic solar cells beyond one pair of donor–acceptor: ternary blends and more. J. Phys. Chem. Lett. 4, 1802–1810 (2013).

Lu, L., Chen, W., Xu, T. & Yu, L. High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes. Nat. Commun. 6, 7327 (2015).

Li, G. et al. Combinatorial study of exciplex formation at the interface between two wide band gap organic semiconductors. Appl. Phys. Lett. 88, 253505 (2006).

Liu, S. et al. Enhanced efficiency of polymer solar cells by adding a high mobility conjugated polymer. Energy Environ. Sci. 8, 1463–1470 (2015).

Zhao, W. et al. Ternary polymer solar cells based on two acceptors and one donor for achieving 12.2% efficiency. Adv. Mater. 29, 1604059 (2017). Non-fullerene acceptors enable the fabrication of a polymer solar cell with over 12% PCE.

Baran, D. et al. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. Nat. Mater. 16, 363–370 (2016).

Liu, Y. et al. Integrated perovskite/bulk-heterojunction toward efficient solar cells. Nano Letter 15, 662–668 (2015).

Zuo, C. & Ding, L. Bulk heterojunctions push the photoresponse of perovskite solar cells to 970 nm. J. Mater. Chem. A 3, 9063–9066 (2015).

Kim, J. et al. High-performance integrated perovskite and organic solar cells with enhanced fill factors and near-infrared harvesting. Adv. Mater. 28, 3159–3165 (2016).

Li, X. et al. Dual plasmonic nanostructures for high performance inverted organic solar cells. Adv. Mater. 24, 3046–3052 (2012).

Liu, J. et al. Fast charge separation in a non-fullerene organic solar cell with a small driving force. Nat. Energy 1, 16089 (2016).

Hong, Z., Dou, L., Li, G. & Yang, Y. in Progress in High-Efficient Solution Process Organic Photovoltaic Devices Ch. 11 (eds Yang, Y. & Li, G. ) 315–346 (Springer, 2015).

Bae, S.-H. et al. Printable solar cells from advanced solution-processible materials. Chem 1, 197–219 (2016).