Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling

Corrosion Science - Tập 69 - Trang 322-337 - 2013
S. Danaher1, T. Dudziak2, P.K. Datta1, R. Hasan1, P.S. Leung1
1Northumbria University, Computing, Engineering and Information Sciences, Newcastle upon Tyne, Tyne and Wear NE1 8ST, United Kingdom
2Cranfield University, Surface Engineering and Nanotechnology Institute, School of Applied Science, Cranfield, Bedfordshire MK43 0AL, United Kingdom

Tài liệu tham khảo

Du, 1994, Air oxidation behaviour of Ti–6Al–4V alloy between 650°C and 850°C, Corros. Sci., 36, 631, 10.1016/0010-938X(94)90069-8 Du, 1996, High temperature corrosion of Ti and Ti–6AI–4V alloy, Oxid. Met., 45, 507, 10.1007/BF01046849 Jiang, 2002, Effect of Nb on the high temperature oxidation of Ti–(0–50at.%)Al, Scripta Mater., 46, 639, 10.1016/S1359-6462(02)00042-8 Tang, 1999, The effects of several coatings on cyclic oxidation resistance of TiAl, Intermetallics, 7, 1271, 10.1016/S0966-9795(99)00044-8 Wang, 1997, Effect of chromium on the oxidation resistance of TiAl intermetallics, Oxid. Met., 48, 381, 10.1007/BF02153457 Wang, 1997, Effect of a sputtered TiAlCr coating on the oxidation resistance of TiAl intermetallic compound, Oxid. Met., 48, 511 Ehiasarian, 2007, Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion, J. Appl. Phys., 101, 054301, 10.1063/1.2697052 I.M. Ross, W.M. Rainforth, C. Strondl, F. Papa, R. Tietema, Structural and interface studies of a nono-scale TiAlYN/CrN/alumina coating, in: Proceedings of the 14th European Microscopy Congress S. Richter, A. Schwedt (Eds.), EMC Mater. Sci. 2, 2008, pp. 711–712. Leyens, 2002, Novel coating systems produced by the combined cathodic arc/unbalanced magnetron sputtering for environmental protection of titanium alloys, Surf. Coat. Technol., 155, 103, 10.1016/S0257-8972(02)00063-4 Perkins, 1987, Formation of alumina on Ti–Al alloy, Scripta Metal., 21, 1505, 10.1016/0036-9748(87)90291-2 Picton, 1994 Mihalakakou, 2000, The total solar radiation time series simulation in Athens, using neural networks, Theoret. Appl. Climatol., 66, 185, 10.1007/s007040070024 Lang, 1990, A time-delay neural network architecture for isolated word recognition, Neural Networks, 3, 23, 10.1016/0893-6080(90)90044-L Wong, 2007, Generalised NARX shunting neural network modelling of friction, Mech. Syst. Signal. Pr., 21, 553, 10.1016/j.ymssp.2005.08.029 Elman, 1990, Finding structure in time, Cognit. Sci., 14, 179, 10.1207/s15516709cog1402_1 Smelts, 1995, SCC susceptibility analysis of stainless steels in nuclear reactor water: a neural network and expert system approach, Fuzzy Sets Syst., 74, 153, 10.1016/0165-0114(95)00014-C Cheng, 1999, Artificial neural network technology for the data processing of on-line corrosion fatigue crack growth monitoring, Int. J. Press. Vessels Piping, 76, 113, 10.1016/S0308-0161(98)00136-7 Cai, 1999, Phenomenological modelling of atmospheric corrosion using an artificial neural network, Corros. Sci., 41, 2001, 10.1016/S0010-938X(99)00024-4 Pintos, 2000, Artificial neural network modelling of atmospheric corrosion in MICAT project, Corros. Sci., 42, 35, 10.1016/S0010-938X(99)00054-2 Birbilis, 2011, A combined neural network and mechanistic approach for the prediction of corrosion rate and yield strength of magnesium-rare earth alloys, Corros. Sci., 53, 168, 10.1016/j.corsci.2010.09.013 Cottis, 1999, Neural network methods for corrosion data reduction, Mater. Des., 20, 169, 10.1016/S0261-3069(99)00026-6 Nesic, 2001, Probabilistic modelling of CO2 corrosion laboratory data using neural networks, Corros. Sci., 43, 1373, 10.1016/S0010-938X(00)00157-8 Kamrunnahar, 2011, Prediction of corrosion behavior of alloy 22 using neural network as a data mining tool, Corros. Sci., 53, 961, 10.1016/j.corsci.2010.11.028 Barshilia, 2005, Structure, hardness and thermal stability of TiAlN and nanolayered TiAlN/CrN multilayer films, Vacuum, 77, 169, 10.1016/j.vacuum.2004.08.020 Kubashewski, 1967 I.M. Ross, W.M. Rainforth, Z. Zhou, J.C. Walker, C. Reinhard, A.P. Ehiasarian, P.Eh. Hovsepian, R. Braun, C. Leyens, Oxidation characteristics of –TiAl–8Nb coated with a CrAlYN/CrN nanoscale multilayer coating, TMS, 2008. Hovsepian, 2006, CrAlYN/CrN superlattice coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique, Surf. Coat. Technol., 201, 4105, 10.1016/j.surfcoat.2006.08.027 Hovsepian, 2010, Novel CrAlYN/CrN nanoscale multilayer PVD coatings produced by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique for environmental protection of γ-TiAl alloys, Surf. Coat. Technol., 204, 2702, 10.1016/j.surfcoat.2010.02.021 Ross, 2010, Electron energy loss spectroscopy of CrAlYN/CrN–CrAlY(O)N/Cr(O)N multilayers deposited by unbalanced magnetron sputtering, Thin Solid Films, 518, 5121, 10.1016/j.tsf.2010.03.012 Chim, 2009, Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc, Thin Solid Films, 517, 4845, 10.1016/j.tsf.2009.03.038 M. Beagle, M. Hagan, H. Demuth, Matlab Neural Network toolbox Users Guide, The Mathworks, 2010. Danaher, 2004, Erosion modelling using Bayesian regulated artificial neural networks, Wear, 256, 879, 10.1016/j.wear.2003.08.006