Loading and unloading of a power-law hardening spherical contact under stick contact condition

Sorvari, 2014, Feeding in rolling contact of layered printing cylinders, Int J Mech Sci, 88, 82, 10.1016/j.ijmecsci.2014.07.008 Patil, 2014, Contact stress analysis of helical gear pairs, including frictional coefficients, Int J Mech Sci, 85, 205, 10.1016/j.ijmecsci.2014.05.013 Chen, 2010, Modeling elasto-plastic indentation on layered materials using the equivalent inclusion method, Int J Solids Struct, 47, 2841, 10.1016/j.ijsolstr.2010.06.011 Zhou, 2011, Multiple 3D inhomogeneous inclusions in a half space under contact loading, Mech Mater, 43, 444, 10.1016/j.mechmat.2011.02.001 Wang, 2013, Novel model for partial-slip contact involving a material with inhomogeneity, ASME J Tribol, 135, 041401, 10.1115/1.4024548 Johnson, 1985 Greenwood, 1966, Contact of nominally flat surfaces, Proc R Soc Lond Ser A, 295, 300, 10.1098/rspa.1966.0242 Chang, 1987, An elastic–plastic model for the contact of rough surfaces, ASME J Tribol, 109, 257, 10.1115/1.3261348 Zhao, 2000, An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow, ASME J Tribol, 122, 86, 10.1115/1.555332 Kogut, 2002, Elastic–plastic contact analysis of a sphere and a rigid flat, ASME J Appl Mech, 69, 657, 10.1115/1.1490373 Jackson, 2005, A finite element study of elasto-plastic hemispherical contact against a rigid flat, ASME J Tribol, 127, 343, 10.1115/1.1866166 Shankar, 2008, Effect of strain hardening in elastic–plastic transition behavior in a hemisphere in contact with a rigid flat, Int J Solids Struct, 45, 3009, 10.1016/j.ijsolstr.2008.01.017 Shankar, 2014, Effect of strain hardening during unloading for an elastic–plastic hemisphere in contact with a rigid flat, Mech Adv Mater Struct, 21, 139, 10.1080/15376494.2012.680666 Kadin, 2006, Unloading an elastic–plastic contact of rough surfaces, J Mech Phys Solids, 54, 2652, 10.1016/j.jmps.2006.04.013 Brake, 2012, An analytical elastic-perfectly plastic contact model, Int J Solids Struct, 49, 3129, 10.1016/j.ijsolstr.2012.06.013 Etsion, 2005, Unloading of an elastic–plastic loaded spherical contact, Int J Solids Struct, 42, 3716, 10.1016/j.ijsolstr.2004.12.006 Kadin, 2008, Loading–unloading of an elastic–plastic adhesive spherical microcontact, J Colloid Interface Sci, 321, 242, 10.1016/j.jcis.2007.12.046 Du, 2007, A finite element model of loading and unloading of an asperity contact with adhesion and plasticity, J Colloid Interface Sci, 312, 522, 10.1016/j.jcis.2007.03.040 McGuiggan, 2008, Stick slip contact mechanics between dissimilar materials: effect of charging and large friction, Langmuir, 24, 3970, 10.1021/la703882h Ovcharenko, 2008, In situ and real-time optical investigation of junction growth in spherical elastic–plastic contact, Wear, 264, 1043, 10.1016/j.wear.2007.08.009 Johnson, 1973, The effect of the indenter elasticity on the Hertzian fracture of brittle materials, Proc R Soc Lond Ser A, 334, 95, 10.1098/rspa.1973.0082 Goodman, 1962, Contact stress analysis of normally loaded rough spheres, ASME J Appl Mech, 29, 515, 10.1115/1.3640599 Brizmer, 2006, The effect of contact conditions and material properties on the elasticity terminus of a spherical contact, Int J Solids Struct, 43, 5736, 10.1016/j.ijsolstr.2005.07.034 Brizmer, 2006, The effect of contact conditions and material properties on elastic–plastic spherical contact, J Mech Mater Struct, 1, 865, 10.2140/jomms.2006.1.865 Ovcharenko, 2007, In situ investigation of the contact area in elastic–plastic spherical contact during loading–unloading, Tribol Lett, 25, 153, 10.1007/s11249-006-9164-y Zait, 2010, Unloading of an elastic–plastic spherical contact under stick contact condition, Int J Solids Struct, 47, 990, 10.1016/j.ijsolstr.2009.12.014 Ramberg, 1943, Description of stress–strain curves by three parameters, NACA, 902, 1 Olsson, 2013, On force–displacement relations at contact between elastic–plastic adhesive bodies, J Mech Phys Solids, 61, 1185, 10.1016/j.jmps.2013.01.004 Lan, 2014, On the relationships between hardness and the elastic and plastic properties of isotropic power-law hardening materials, Philos Mag, 94, 35, 10.1080/14786435.2013.839889 Zhao, 2012, Loading and unloading of a spherical contact: from elastic to elastic-perfectly plastic materials, Int J Mech Sci, 56, 70, 10.1016/j.ijmecsci.2012.01.006