Load distribution and damage evolution in bending and stretch dominated Ti-6Al-4V cellular structures processed by selective laser melting

Wohlers, 2015 Petrovic, 2011, Additive layered manufacturing: sectors of industrial application shown through case studies, Int J Production Res, 49, 1061, 10.1080/00207540903479786 Frazier, 2014, Metal additive manufacturing: a review, J Mater Eng Perform, 23, 1917, 10.1007/s11665-014-0958-z Rehme, 2010 Gibson, 2005, Biomechanics of cellular solids, J Biomech, 38, 377, 10.1016/j.jbiomech.2004.09.027 Davies, 1983, Review – metallic foams: their production, properties and applications, J Mater Sci, 1899, 10.1007/BF00554981 Evans, 1999, Multifunctionality of cellular metal systems, Prog Mater Sci, 171 Miyoshi, 2000, ALPORAS Aluminum foam: production process, properties, and applications, Adv Eng Mater, 2, 179, 10.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G Andrews, 1999, Compressive and tensile behaviour of aluminum foams, Mater Sci Eng, A, 270, 113, 10.1016/S0921-5093(99)00170-7 Maxwell, 1864, On the calculation of the equilibrium and stiffness of frames, Philosophical Magazine Series, 4, 294, 10.1080/14786446408643668 Ashby, 2006, The properties of foams and lattices, Philos Trans A, 364, 15, 10.1098/rsta.2005.1678 Suard, 2014, Towards stiffness prediction of cellular structures made by electron beam melting (EBM), Powder Metall, 57, 190, 10.1179/1743290114Y.0000000093 Suard, 2015, Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by electron beam melting, Addit Manuf, 8, 124, 10.1016/j.addma.2015.10.002 Zargarian, 2016, Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures, Mater Sci Eng, C, 60, 339, 10.1016/j.msec.2015.11.054 Gorny, 2011, In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting, Mater Sci Eng, A, 528, 7962, 10.1016/j.msea.2011.07.026 Robbins, 2016, An efficient and scalable approach for generating topologically optimized cellular structures for additive manufacturing, Addit Manuf, 12, 296, 10.1016/j.addma.2016.06.013 Kadkhodapour, 2015, Failure mechanisms of additively manufactured porous biomaterials: effects of porosity and type of unit cell, J Mech Behav Biomed Mater, 50, 180, 10.1016/j.jmbbm.2015.06.012 Mazur, 2015, Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM), Int J Adv Manufg Technol, 7, 1391 Niendorf, 2014, Lattice structures manufactured by SLM: on the effect of geometrical dimensions on microstructure evolution during processing, Metall Mater Trans B, 45, 1181, 10.1007/s11663-014-0086-z Brenne, 2013, Additively manufactured cellular structures: impact of microstructure and local strains on the monotonic and cyclic behavior under uniaxial and bending load, J Mater Process Technol, 213, 1558, 10.1016/j.jmatprotec.2013.03.013 Leuders, 2013, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance, Int J Fatigue, 48, 300, 10.1016/j.ijfatigue.2012.11.011 Vilaro, 2011, As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall Mater Trans A, 42, 3190, 10.1007/s11661-011-0731-y Turkowski, 1990, Filters for common resampling tasks, 147 Gibson, 1997 Heinl, 2008, Selective electron beam melting of cellular titanium – mechanical properties, Adv Eng Mater, 10, 882, 10.1002/adem.200800137 Ahmadi, 2015, Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells - the mechanical and morphological properties, Materials, 8, 1871, 10.3390/ma8041871 Cheng, 2012, Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting, J Mech Behav Biomed Mater, 16, 153, 10.1016/j.jmbbm.2012.10.005 Li, 2012, Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting, Acta Mater, 60, 793, 10.1016/j.actamat.2011.10.051 Li, 2014, Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method, Acta Biomater, 10, 4537, 10.1016/j.actbio.2014.06.010 Ushijima, 2011, Estimation of the compressive and shear responses of three-dimensional micro-lattice structures, Procedia Eng, 10, 2441, 10.1016/j.proeng.2011.04.402 Zhao, 2016, The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting, J Mech Behav Biomed Mater, 59, 251, 10.1016/j.jmbbm.2016.01.034 Liu, 2016, A study on the residual stress during selective laser melting (SLM) of metallic powder, Intl J Adv Manuf Technol, 87, 647, 10.1007/s00170-016-8466-y Shiomi, 2004, Residual stress within metallic model made by selective laser melting process, CIRP Annals – Manuf Technol, 53, 195, 10.1016/S0007-8506(07)60677-5 Hrabe, 2011, Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V), J Biomed Mater Res Part B, 99, 313, 10.1002/jbm.b.31901 Huang, 1996, Fatigue of cellular materials, Acta Mater, 1, 289, 10.1016/1359-6454(95)00170-4