Lithium-enhanced functionalized carbon nanofibers as a mixed electronic/ionic conductor for sulfide all solid-state batteries

Chen, 2020, Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces, Chem. Rev., 120, 6820, 10.1021/acs.chemrev.9b00268 Zhao, 2022, Connecting battery technologies for electric vehicles from battery materials to management, iScience, 25, 10.1016/j.isci.2022.103744 Kamaya, 2011, A lithium superionic conductor, Nat. Mater., 10, 682, 10.1038/nmat3066 Richards, 2016, Interface stability in solid-state batteries, Chem. Mater., 28, 266, 10.1021/acs.chemmater.5b04082 Minnmann, 2021, Editors’ choice—quantifying the impact of charge transport bottlenecks in composite cathodes of all-solid-state batteries, J. Electrochem. Soc., 168, 10.1149/1945-7111/abf8d7 Tan, 2019, Elucidating reversible electrochemical redox of Li6PS5Cl solid electrolyte, ACS Energy Lett., 4, 2418, 10.1021/acsenergylett.9b01693 Yoon, 2018, Author Correction: Investigation on the interface between Li10GeP2S12 electrolyte and carbon conductive agents in all-solid-state lithium battery, Sci. Rep., 8, 10366, 10.1038/s41598-018-28601-9 Cho, 2015, A comparative investigation of carbon black (Super-P) and vapor-grown carbon fibers (VGCFs) as conductive additives for lithium-ion battery cathodes, RSC Adv., 5, 95073, 10.1039/C5RA19056H Minnmann, 2022, Designing cathodes and cathode active materials for solid-state batteries, Adv. Energy Mater., 12, 2201425, 10.1002/aenm.202201425 Banerjee, 2020, Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes, Chem. Rev., 120, 6878, 10.1021/acs.chemrev.0c00101 Reddy, 2009, Coaxial MnO2/carbon nanotube array electrodes for high-performance lithium batteries, Nano Lett., 9, 1002, 10.1021/nl803081j Sangrós Giménez, 2020, Modeling the electrical conductive paths within all-solid-state battery electrodes, Chem. Eng. Technol., 43, 819, 10.1002/ceat.201900501 Guo, 2021, Functionalized carbon dots for advanced batteries, Energy Storage Mater., 37, 8, 10.1016/j.ensm.2021.01.020 Saneifar, 2019, Functionalization of the carbon additive of a high-voltage Li-ion cathode, J. Mater. Chem. A, 7, 1585, 10.1039/C8TA07236A Delaporte, 2020, Facile formulation and fabrication of the cathode using a self-lithiated carbon for all-solid-state batteries, Sci. Rep., 10, 11813, 10.1038/s41598-020-68865-8 Hwang, 2021, Highly conductive 3D structural carbon network-encapsulated Ni-rich LiNi0. 8Co0. 1Mn0. 1O2 as depolarized and passivated cathode for lithium-ion batteries, Chem. Eng. J., 406, 126813, 10.1016/j.cej.2020.126813 Ning, 2018, Efficient conducting networks constructed from ultra-low concentration carbon nanotube suspension for Li ion battery cathodes, Carbon, 132, 323, 10.1016/j.carbon.2018.02.056 Lau, 2008, The effect of functionalization on structure and electrical conductivity of multi-walled carbon nanotubes, J. Nanopart. Res., 10, 77, 10.1007/s11051-008-9376-1 Zeng, 2022, Promoting favorable interfacial properties in lithium-based batteries using chlorine-rich sulfide inorganic solid-state electrolytes, Nat. Commun., 13, 1, 10.1038/s41467-022-29596-8 Zhang, 2017, The detrimental effects of carbon additives in Li10GeP2S12-based solid-state batteries, ACS Appl. Mater. Interfaces, 9, 35888, 10.1021/acsami.7b11530 Abdo, 2021, A comprehensive review summarizing the recent biomedical applications of functionalized carbon nanofibers, J. Biomed. Mater. Res. Part B: Appl. Biomater., 109, 1893, 10.1002/jbm.b.34828 Said, 2018, Acid-functionalized carbon nanofibers for high stability, thermoelectrical and electrochemical properties of nanofluids, J. Colloid Interface Sci., 520, 50, 10.1016/j.jcis.2018.02.042 Nguyen Van, 2014, Characterization of carbon nanofibers treated with thermal nitrogen as a catalyst support using point-of-zero charge analysis, J. Nanomater., 2014, 10.1155/2014/631069 Li, 2013, Carbon nanowalls grown by microwave plasma enhanced chemical vapor deposition during the carbonization of polyacrylonitrile fibers, J. Appl. Phys., 113 Novak, 2021, Infrared spectra of hydrogen bond network in lamellar perfluorocarboxylic acid monohydrates, Spectrochim. Acta Part A Mol. Biomol. Spectrosc., 253, 119551, 10.1016/j.saa.2021.119551 Max, 2004, Infrared spectroscopy of aqueous carboxylic acids: comparison between different acids and their salts, J. Phys. Chem. A, 108, 3324, 10.1021/jp036401t Weng, 2019, An ultrathin ionomer interphase for high efficiency lithium anode in carbonate based electrolyte, Nat. Commun., 10, 5824, 10.1038/s41467-019-13783-1 Ma, 2014, Post-metalation of porous aromatic frameworks for highly efficient carbon capture from CO2 + N2 and CH4 + N2 mixtures, Polym. Chem., 5, 144, 10.1039/C3PY00647F Cahyadi, 2018, Enhanced lithium storage capacity of a tetralithium 1, 2, 4, 5-benzenetetracarboxylate (Li4C10H2O8) salt through crystal structure transformation, ACS Appl. Mater. Interfaces, 10, 17183, 10.1021/acsami.8b03323 Tian, 2021, Significantly enhancing the lithium ionic conductivity of metal-organic frameworks via a postsynthetic modification strategy, Langmuir, 37, 3922, 10.1021/acs.langmuir.1c00156 Vadhva, 2021, Electrochemical impedance spectroscopy for all-solid-state batteries: theory, methods and future outlook, ChemElectroChem, 8, 1930, 10.1002/celc.202100108 Perez Beltran, 2020, Localized high concentration electrolytes for high voltage lithium-metal batteries: correlation between the electrolyte composition and its reductive/oxidative stability, Chem. Mater., 32, 5973, 10.1021/acs.chemmater.0c00987 Yu, 2018, A localized high-concentration electrolyte with optimized solvents and lithium difluoro(oxalate)borate additive for stable lithium metal batteries, ACS Energy Lett., 3, 2059, 10.1021/acsenergylett.8b00935 Hatz, 2021, Chemical stability and ionic conductivity of LGPS-type solid electrolyte tetra-Li7SiPS8 after solvent treatment, ACS Appl. Energy Mater., 4, 9932, 10.1021/acsaem.1c01917 Huang, 2021, Creating ionic pathways in solid-state polymer electrolyte by using PVA-coated carbon nanofibers, Compos. Sci. Technol., 207, 10.1016/j.compscitech.2021.108710 D. Pritzl, T. Teufl, A.T.S. Freiberg, B. Strehle, J. Sicklinger, H. Sommer, P. Hartmann, H.A. Gasteiger, Editors' choice—washing of nickel-rich cathode materials for lithium-ion batteries: towards a mechanistic understanding, J. Electrochem. Soc., 166 (2019) A4056-A4066. Ma, 2022, Enhancing the dendrite tolerance of NaSICON electrolytes by suppressing edge growth of Na electrode along ceramic surface, Adv. Energy Mater., 2201680, 10.1002/aenm.202201680 Ye, 2021, A review on Li+/H+ exchange in garnet solid electrolytes: from instability against humidity to sustainable processing in water, ChemSusChem, 14, 4397, 10.1002/cssc.202101178 Jiu, 2018, Effects of binary conductive additives on electrochemical performance of a sheet-type composite cathode with different weight ratios of LiNi0.6Co0.2Mn0.2O2 in all-solid-state lithium batteries, J. Ceram. Process. Res., 19 Byles, 2016, The role of electronic and ionic conductivities in the rate performance of tunnel structured manganese oxides in Li-ion batteries, APL Mater., 4, 10.1063/1.4948272 Strauss, 2020, Influence of electronically conductive additives on the cycling performance of argyrodite-based all-solid-state batteries, RSC Adv., 10, 1114, 10.1039/C9RA10253A Culver, 2019, On the functionality of coatings for cathode active materials in thiophosphate-based all-solid-state batteries, Adv. Energy Mater., 9, 1900626, 10.1002/aenm.201900626 Cronau, 2022, Ionic conductivity versus particle size of ball-milled sulfide-based solid electrolytes: strategy towards optimized composite cathode performance in all-solid-state batteries, Batteries & Supercaps, 5, e202200041, 10.1002/batt.202200041 Z. Zhang, Z. Wang, L. Zhang, D. Liu, C. Yu, X. Yan, J. Xie, J. Huang, Unraveling the conversion evolution on solid‐state Na–SeS2 battery via in situ TEM, Adv. Sci., (2022) 2200744. H. Li, N. Zhang, J. Li, J.R. Dahn, Updating the structure and electrochemistry of LixNiO2 for 0 ≤ x ≤ 1, J. Electrochem. Soc., 165 (2018) A2985-A2993. Zheng, 2019, Ni/Li disordering in layered transition metal oxide: electrochemical impact, origin, and control, Acc. Chem. Res., 52, 2201, 10.1021/acs.accounts.9b00033 Gao, 2020, Evolution of Ni/Li antisites under the phase transition of a layered LiNi1/3Co1/3Mn1/3O2 cathode, J. Mater. Chem. A, 8, 6337, 10.1039/D0TA01642J Wu, 2019, Improving the structure stability of LiNi0.8Co0.1Mn0.1O2 by surface perovskite-like La2Ni0.5Li0.5O4 self-assembling and subsurface La3+ doping, ACS Appl. Mater. Interfaces, 11, 36751, 10.1021/acsami.9b12595 Ou, 2022, Enabling high energy lithium metal batteries via single-crystal Ni-rich cathode material co-doping strategy, Nat. Commun., 13, 2319, 10.1038/s41467-022-30020-4