Life Cycle Analysis of Extruded Films Based on Poly(lactic acid)/Cellulose Nanocrystal/Limonene: A Comparative Study with ATBC Plasticized PLA/OMMT Systems

Journal of Polymers and the Environment - Tập 26 - Trang 1891-1902 - 2017
R. Petrucci1, E. Fortunati1, D. Puglia1, F. Luzi1, J. M. Kenny1, L. Torre1
1Civil and Environmental Engineering Department, UdR INSTM, University of Perugia, Terni, Italy

Tóm tắt

Life cycle analysis (LCA) of limonene plasticized poly(lactic acid) (PLA) films containing cellulose nanocrystals (CNC) extracted, by acid hydrolysis, from Phormium tenax leaf fibres, was assessed and compared with the results of acetyl tributyl citrate (ATBC) plasticized PLA films, having equivalent mechanical properties, containing organo-modified montmorillonite (OMMT). Eco-Indicator 99 tool has been adopted as the main method for life cycle assessment. Results indicated that, despite CNC are biobased fillers obtained by natural sources, the related chemical extraction leads to a large environmental footprint and a relatively relevant energy expense. LCA characterization of these films demonstrated that the environmental impact of PLA/limonene film reinforced with 1% in weight of CNC (PLA/CNC/limonene) is comparable to the environmental impact of polylactic acid films reinforced with OMMT and plasticized with a petroleum based plasticizer (ATBC) (PLA/OMTT/ATBC). A “cradle to gate” approach has been considered for both the film typologies.

Tài liệu tham khảo

Averous L (2004) Biodegradable multiphase systems based on plasticized starch: a review. J Macromol Sci Polym R C44(3), 231–274 Fortunati E, Armentano I, Iannoni A, Barbale M, Zaccheo S, Scavone M, Visai L, Kenny JM (2012) New multifunctional poly(lactide acid) composites: mechanical, antibacterial, and degradation properties. J Appl Polym Sci 124(1):87–98 Arrieta MP, Fortunati E, Dominici F, Rayon E, Lopez J, Kenny JM (2014) Multifunctional PLA-PHB/cellulose nanocrystal films processing, structural and thermal properties. Carbohydr Polym 107:16–24 Auras RA, Singh SP, Singh, JJ (2005) Evaluation of oriented poly(lactide) polymers vs. existing PET and oriented PS for fresh food service containers. Packag Technol Sci 18(4):207–216 De Rosa IM, Iannoni A, Kenny JM, Puglia D, Santulli C, Sarasini F, Terenzi A (2011) Poly(lactic acid)/phormium tenax composites: morphology and thermo-mechanical behavior. Polym Compos 32(9):1362–1368 Fortunati E, Puglia D, Santulli C, Sarasini F, Kenny JM (2012) Biodegradation of phormium tenax/poly(lactic acid) composites. J Appl Polym Sci 125:E562–E572 Sarasini F, Puglia D, Fortunati E, Kenny JM, Santulli C (2013) Effect of fiber surface treatments on thermo-mechanical behavior of poly (lactic acid)/phormium tenax composites. J Polym Environ 21(3):881–891 Petersen K, Nielsen PV, Olsen MB (2001) Physical and mechanical properties of biobased materials starch, polylactate and polyhydroxybutyrate. Starch-Stärke 53(8):356–361 Matos Ruiz M, Cavaillé JY, Dufresne A, Gérard JF, Graillat C (2000) Processing and characterization of new thermoset nanocomposites based on cellulose whiskers. Compos Interface 7(2):117–131 Fortunati E, Puglia D, Monti M, Peponi L, Santulli C, Kenny JM, Torre L (2013) Extraction of cellulose nanocrystals from phormium tenax fibres. J Polym Environ 21(2):319–328 Fortunati E, Puglia D, Monti M, Santulli C, Maniruzzaman M, Kenny JM (2013) Cellulose nanocrystals extracted from okra fibers in PVA nanocomposites. J Appl Polym Sci 128(5):3220–3230 Puglia D, Fortunati E, Torre L, Kenny JM, Monti M, Santulli C (2011) Bioplastic nano-reinforcement extracted from phormium leaf fibers. Society of Plastics Engineers Plastics Research Online. doi:10.1002/spepro.003937 Fleischer T, Grunwald A (2008) Making nanotechnology developments sustainable. A role for technology assessment? J Clean Prod 16(8):889–898 Frischknecht R, Jungbluth N, Althaus HJ, Bauer C, Doka G, Dones R, Hischier R, Hellweg S, Humbert S, Köllner T (2007) Implementation of life cycle impact assessment methods. Ecoinvent Report No. 3 St. Gallen, July 2010 Von Gleich A, Steinfeldt M, Petschow U (2008) A suggested three-tiered approach to assessing the implications of nanotechnology and influencing its development. J Clean Prod 16(8):899–909 Arvidsson R, Ngyen D, Svanstrom M (2015) Life cycle assessment of cellulose nanofibrils production by mechanical treatment and two different pretreatment processes. Environ Sci Technol 49:6881–6890 De Figueirêdo MCB, De Freitas Rosa M, Ugaya CML, De Souza MDSM, Da Silva Braid ACC, De Melo LFL (2012) Life cycle assessment of cellulose nanowhiskers. J Clean Prod 35:130–139 Li Q, McGinnis S, Sydnor C, Wong A, Renneckar S (2013) Nanocellulose life cycle assessment. ACS Sustain Chem Eng 1(8):919–928 Scatto M, Salmini E, Castiello S, Coltelli MB, Conzatti L, Stagnaro P, Andreotti L, Bronco S 2013. Plasticized and nanofilled poly (lactic acid) based cast films: effect of plasticizer and organoclay on processability and final properties. J Appl Polym Sci 127(6):4947–4956 Fortunati E, Armentano I, Zhou Q, Puglia D, Terenzi A, Berglund LA, Kenny JM (2012) Microstructure and nonisothermal cold crystallization of PLA composites based on silver nanoparticles and nanocrystalline cellulose. Polym Degrad Stab 97(10):2027–2036 Fortunati E, Luzi F, Puglia D, Dominici F, Santulli C, Kenny JM, Torre L (2014) Investigation of thermo-mechanical, chemical and degradative properties of PLA-limonene films reinforced with cellulose nanocrystals extracted from phormium tenax leaves. Eur Polym J 56(0):77–91 Pourbafrani M, McKechnie J, MacLean HL, Saville BA (2013) Life cycle greenhouse gas impacts of ethanol, biomethane and limonene production from citrus waste. Environ Res Lett 8:015007. doi:10.1088/1748-9326/8/1/015007