Leakage failure in fibre-reinforced polymer composite tubular vessels at elevated temperature

Roberts, 2003, The effect of matrix microcracks on the stress-strain relationship in fibre composite tubes, J. Compos Mater., 37, 1509, 10.1177/0021998303034360

Soden, 2004, Recommendations for designers and researchers resulting from the world-wide failure exercise, Compos Sci. Technol., 64, 589, 10.1016/S0266-3538(03)00228-8

Hull, 1978, Failure of glass/polyester filament wound pipe, Composites, 9, 17, 10.1016/0010-4361(78)90513-X

Soden, 1989, Experimental failure stresses for ±55° filament wound glass fibre reinforced plastic tubes under biaxial loads, Composites, 20, 125, 10.1016/0010-4361(89)90640-X

Frost, 1994, Glass fibre-reinforced epoxy matrix filament-wound pipes for use in the oil industry, Compos. Manuf., 5, 73, 10.1016/0956-7143(94)90058-2

Carroll, 1995, Rate-dependent behaviour of ±55° filament-wound glass-fibre/epoxy tubes under biaxial loading, Compos. Sci. Technol., 55, 391, 10.1016/0266-3538(95)00119-0

Karayaka, 1995, Leakage damage and failure of glass-fibre reinforced composite tubular vessels under combined internal pressure and axial loading, 747

Ellyin, 1997, Behavior of multidirectional filament wound fibreglass/epoxy tubulars under biaxial loading, Compos. A, 28, 781, 10.1016/S1359-835X(97)00021-3

Mertiny, 2007, Quantification of leakage damage in high-pressure fibre-reinforced polymer composite tubular vessels, Polym. Test., 26, 172, 10.1016/j.polymertesting.2006.09.009

Mertiny, 2002, Influence of the filament winding tension on physical and mechanical properties of reinforced composites, Compos. A, 33, 1615, 10.1016/S1359-835X(02)00209-9

Legg, 1982, Effect of resin flexibility on the properties of filament wound tubes, Composites, 13, 369, 10.1016/0010-4361(82)90145-8