Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Hàn laser các tổ hợp kim loại khác nhau
Tóm tắt
Khả năng sản xuất một sản phẩm bằng cách sử dụng nhiều kim loại và hợp kim khác nhau làm tăng tính linh hoạt trong thiết kế và sản xuất. Các tính chất như khả năng chịu nhiệt, chịu mòn và chống ăn mòn có thể được tối ưu hóa, và thường mang lại lợi ích về mặt kinh tế trong sản xuất. Tuy nhiên, việc kết nối các tổ hợp kim loại khác nhau lại là một nhiệm vụ thách thức do sự khác biệt lớn về các thuộc tính vật lý và hóa học có thể tồn tại. Hàn laser, một quá trình có mật độ công suất cao nhưng tiêu tốn năng lượng thấp, cung cấp giải pháp cho một số vấn đề thường gặp với các kỹ thuật kết nối thông thường. Việc định vị chính xác mối hàn, gia nhiệt và làm nguội nhanh chóng, độ biến dạng thấp, tính linh hoạt của quá trình và cơ hội cải tiến sản phẩm là những đặc điểm chính của nó. Bài đánh giá này mô tả các nguyên tắc cơ bản của hàn laser đối với các tổ hợp kim loại khác nhau và làm nổi bật các lợi ích trên trong một số ứng dụng thực tiễn. Kết luận cho thấy rằng có tiềm năng ứng dụng trong nhiều lĩnh vực công nghiệp.
Từ khóa
#hàn laser #kết nối kim loại khác nhau #hợp kim #chống ăn mòn #điện kinh tế #ứng dụng công nghiệpTài liệu tham khảo
M. N. Uddin, Ind. Laser Rev. 6 (2) (1991) p. 11.
C. A. Forbis-Parrott, Weld. J. 70 (7) (1991) 37.
C. Magnusson, Svetsaren 46 (2) (1992) 12.
S. T. Riches, Weld. Metal Fabric. 61 (2) (1993) 79.
H. Maruo, in “Proceedings of the Conference on Laser Advanced Materials Processing (LAMP'92)”, Niigata, June 1992, edited by S. Namba and A. Matsunawa (High Temperature Society of Japan, Osaka, 1992) p. 29.
D. A. Belforte, in “Proceedings of the 5th International Conference on Welding and Melting by Electron and Laser Beams”, La Baule, June 1993, edited by C. Charissoux (SDEM, Saclay, 1993), p. 1.
K. Nilsson and I. Sárdy, in “Proceedings of the 4th International Conference on Lasers in Manufacturing”, Birmingham, UK, edited by W. M. Steen (IFS Conferences, Bedford, UK, 1987) p. 183.
V. P. Kujanpää and T. J. I. Moisio, in “Proceedings of the Conference on Recent Trends in Welding Science and Technology”, Gatlinburg, May 1989, edited by S. A. David and J. M. Vitek (ASM International, Materials Park, Ohio, 1990) p. 333.
D. W. Moon and E. A. Metzbower, in “Proceedings of the 2nd International Conference on Application of Lasers in Materials Processing”, edited by E. A. Metzbower (ASM, Materials Park, Ohio, 1983) p. 248.
Z. Sun and T. J. I. Moisio, Mater. Sci. Technol. 9 (7) (1993) 603.
C. M. Smithells, “Metals Reference Book”, 5th edn (Butterworths, London, 1976) p. 940.
P. J. Blakeley and A. Sanderson, Weld. J. 65 (1) (1984) 42.
D. Belforte and M. Levitt “Industrial Laser Annual Handbook” (eds), (PennWell Books, Tulsa, 1989) p. 8.
J. C. Ion, K. E. Easterling and M. F. Ashby, Acta Metall. 32 (1984) 1949.
J. C. Ion, A.S. Salminen and Z. Sun, Weld. J. Submitted (1994).
A. L. Edwards, Report UCRL-50589, University of California Research Laboratory, February 1969.
J. Seretsky and E. R. Ryba, Weld. J. 55 (7) (1976) 208s.
U. Dilthey and X. Shu, Schweissen Schneiden 45 (6) (1993) E103.
I. Hrivňák, Weld. World 16 (7/8) (1978) 130.
A. L. Schaeffler, Metal Prog. 56 (1949) 680.
W. T. Delong, Weld. J. 53 (7) (1974) 273s.
D. J. Kotecki and T. A. Siewert, ibid. 71 (1992) 171s.
S. A. David, J. M. Vitek and T. L. Hebble, ibid. 68 (10) (1987) 289s.
Y. Nakao, Weld. Int. 3 (1989) 619.
A. Alto, L. M. Galantucci, L. Cento and G. Daurelio, in “Proceedings of the 1st International Conference on Power Beam Technology”, Brighton, September 1986 J. D. Russell (The Welding Institute, Abington, 1987) p. 243.
Z. Sun, Scripta Metall. Mater. 29 (1993) 633.
Z. Sun and T. J. I. Moisio, J. Mater. Sci. Lett. 13 (1994) 802.
N. Suutala, Acta Universitatis Ouluensis, Series C, Technica No. 23, Metalurgica No. 3, University of Oulu, Oulu, Finland (1982).
I. C. Lippold, Weld. J. 73 (6) (1994) 129s.
L. A. Weeter, C. E. Albright and W. H. Jones, ibid. 65 (3) (1986) 51s.
M. J. Cieslak, ibid. 66 (2) (1987) 57s.
M. Dell'erba, P. Sforza, G. Chita and L. Cento, in “Proceedings of the Conference on The Changing Frontiers of Laser Materials Processing”, Arlington, November 1986, edited by C. M. Banas and G. L. Whitney, (IFS, Bedford, 1987) p. 57.
G. F. Antonova, V. P. Sayapin, F. K. Kosyrev and V. A. Barsuk, Avtom. Svarka 4 (1989) 41 (in Russian).
R. C. Salo, in “Proceedings of the Conference The Laser versus The Electron Beam in Welding, Cutting and Surface Treatment-State of the Art 1987”. Reno, November 1987 (Bakish Materials Corporation, Englewood, 1987) p. 318.
A. C. Lingenfelter, C. N. Westrich, C. N. Anglin and J. R. Murchie, in “Proceedings of the 6th International Congress on Applications of Lasers and Electron Optics” (ICALEO '87), San Diego, November 1987 (IFS, Bedford, 1988) p. 69.
D. R. Andrews, Br. Weld. J. 9 (1962) 650.
G. J. Bruck, in “Proceedings of the Conference of The Changing Frontiers of Laser Materials Processing”, Arlington, November 1986, edited by C. M. Banas and G. L. Whitney (IFS, Bedford, 1987) p. 149.
Y. H. Han, J. Suh and Y. H. Hyun, in “Proceedings of the 2nd European Conference on Joining Technology EUROJOIN 2”, Florence, May 1994 (Instituto Italiano della Saldatura, Genova, 1994) p. 337.
J. P. Reynolds, H. W. Kerr, P. J. Fehrenbach, L. Bourque and R. D. Davidson, in “Proceedings of the Conference on Advances in Welding Science and Technology”, Gatlinburg, May 1986, edited by S. A. David (ASM International, Materials Park, OH, 1986) p. 325.
W. Golderer, R. Schwab and R. Stützle, Schweissen Schneiden 37 (12) (1985) E211.
M. G. Jones, in “Proceedings of the Materials Processing Conference ICALEO '82”, Boston, September 1982 (Laser Institute of America, Toledo, OH, 1982) p. 87.
C. Lampa, I. Sarady, J. Powell, J. Mattson and C. Magnusson, in “Proceedings of the 4th Conference on Laser Materials Processing Conference”, Sønderborg, August 1993, edited by F. O. Olsen and J. K. Kristensen, (Forces Inst., Brøndby, 1993) p. 215.
A. G. Grigoryants, I. N. Shiganov, A. V. Kudryavtsev and O.A. Parfenovskaya, Weld. Prod. 33 (8) (1986) 7.
S. Elliot, Weld. Inst. Res. Bull. 24 (4) (1983) 118.
E. Kappelsberger, Ind.-Anz. 111 (43–44) (1989) 36 (in German).
M. Turna, P. Kopca and B. Trefilova, Weld. Int. 3 (2) (1989) 173.
D. Cruciani and F. Linguiti, in “Proceedings of the Conference on CO2 Lasers and Applications II” edited by H. Opower (SPIE, Bellingham, 1990) p. 243.
S. Fukumoto, A. Hirose and K. F. Kobayashi, Mater. Sci. Technol. 9 (1993) 264.