Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Lớp phủ Fe-Al-Cr bằng phương pháp hàn laser với tính chất cơ học được cải thiện
Tóm tắt
Các lớp phủ Fe-Al-Cr dày khoảng 50 μm đã được chế tạo thành công trên các nền thép carbon 1045 thông qua quá trình hàn laser. Hàm lượng Cr thích hợp (5 at% Cr) sẽ dẫn đến việc giảm nhiệt độ nóng chảy và cải thiện độ nhớt của lõi lỏng và tốc độ hình thành tinh thể trong lò lỏng, dẫn đến việc tinh chế các hạt trong cấu trúc đông đặc. Kết quả là, lớp hàn laser Fe-29Al-5Cr thể hiện độ cứng, tính dẻo và khả năng chống mài mòn tốt nhất ở nhiệt độ 400 °C. Hàm lượng Cr quá mức cho lớp phủ Fe-29Al-7.5Cr dẫn đến việc hình thành Cr2Al trong các ranh giới hạt và lỗ hổng nhiệt trong quá trình đông đặc, dẫn đến các tính chất cơ học kém và hành vi ma sát kém.
Từ khóa
#Lớp phủ Fe-Al-Cr #hàn laser #tính chất cơ học #cấu trúc đông đặc #khả năng chống mài mònTài liệu tham khảo
Chen SJ, Chen Y, Li S, et al. Bulk Synthesis of Fe3Al Intermetallic Compound Nanoparticles by Flow-Levitation Method[J]. Nano, 2015, 10(01): 1 550 002
Farrokhi A, Samadi A, Asadi Asadabad M, et al. Characterization of Mechanically Alloyed Nano Structured Fe3Al Intermetallic Compound by X-ray Diffractometry[J]. Adv. Powder Technol., 2015, 26(3): 797–801
Le XW, Ji D, Zhong QD, et al. The Infuence of Prepared Methods on Electrochemical Corrosion Behavior of Fe3Al Intermetallic[J]. Adv. Mater. Res., 2014, 1033-1034: 1 258–1 262
Łyszkowski R, Czujko T, Varin RA. Multi-Axial Forging of Fe-3Al-Base Intermetallic Alloy and Its Mechanical Properties[J]. J. Mater. Sci., 2017, 52(5): 2 902–2 914
Enayati MH, Salehi M. Formation Mechanism of Fe3Al and FeAl Intermetallic Compounds During Mechanical Alloying[J]. J. Mater. Sci., 2005, 40(15): 3 933–3 938
Luo X, Yao Z, Zhang P, et al. Tribological Behavior of Al-Cr Coating Obtained by DGPSM and IIP Composite Technology[J]. Surf. Rev. Lett., 2017, 24(7): 1 750 091
Amiriyan M, Blais C, Savoie S, et al. Tribo-Mechanical Properties of HVOF Deposited Fe3Al Coatings Reinforced with TiB2 Particles for Wear-Resistant Applications[J]. Materials, 2016, 9(2): 117
Mohammadkhani S, Jajarmi E, Nasiri H, et al. Applying FeAl Coating on the Low Carbon Steel Substrate Through Self-Propagation High Temperature Synthesis (SHS) Process[J]. Surf. Coat. Technol., 2016, 286: 383–387
Goto T. A Review: Structural Oxide Coatings by Laser Chemical Vapor Deposition[J]. J. Wuhan University of Technology-Mater. Sci. Ed., 2016, 31(1): 1–5
Zamanzade M, Vehoff H, Barnoush A. Cr Effect on Hydrogen Embrittlement of Fe3Al-Based Iron Aluminide Intermetallics: Surface or Bulk Effect[J]. Acta Mater., 2014, 69: 210–223
Mao TC, Chen JC, Hu CC. Effect of the Pulling Rate on the Quality of Cerium-Substituted YIG Single-Crystal Fibers by LHPG[J]. J. Cryst. Growth, 2006, 296(1): 110–116
Yao C, Xu B, Zhang X, et al. Interface Microstructure and Mechanical Properties of Laser Welding Copper–Steel Dissimilar Joint[J]. Opt. Lasers Eng., 2009, 47(7-8): 807–814
Yao C, Huang J, Zhang P, et al. Toughening of Fe-Based Laser-Clad Alloy Coating[J]. Appl. Surf. Sci., 2011, 257(6): 2 184–2 192
Li JN, Gong SL, Liu H, et al. Physical Properties and Microstructures of Fe3Al Matrix Laser Amorphous–Nanocrystals Reinforced Coating[J]. Mater. Lett., 2013, 92: 235–238
Hadef F. Solid-State Reactions During Mechanical Alloying of Ternary Fe–Al–X (X=Ni, Mn, Cu, Ti, Cr, B, Si) Systems: A Review[J]. J. Magn. Magn. Mater., 2016, 419: 105–118
Kan Q, Yan W, Kang G, et al. Oliver–Pharr Indentation Method in Determining Elastic Moduli of Shape Memory Alloys—A Phase Transformable Material[J]. J. Mech. Phys. Solids, 2013, 61(10): 2 015–2 033
Niu Xl, Wang Lj. Effect of Transition-Metal Substitution on Electronic and Mechanical Properties of Fe3Al: First-Principles Calculations[J]. Comput. Mater. Sci., 2012, 53(1): 128–132
Chen Y, Yao ZJ, Zhang PZ, et al. First-Principles Study on Effects of Cr, Mo and W on the Electronic Structure and Mechanical Properties of FeAl Intermetallic Compounds[J]. Rare Met. Mater. Eng., 2014, 43(9): 2 112–2 117
Ortega Y, de Diego N, Plazaola F, et al. Infuence of Cr Addition on the Defect Structure of Fe–Al Alloys[J]. Intermetallics, 2007, 15(2): 177–180
Chen Y, Yao ZJ, Zhang PZ, et al. Effect of Alloying Elements V, Cr and Ni on the Electronic Structure and Mechanical Properties of FeAl from First-Principles Calculation[J]. Adv. Mater. Res., 2014, 887-888: 378–383