Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads

Abedini M, Mutalib A A, Raman S N, Alipour R, Akhlaghi E. Pressure-impulse (P-I) diagrams for reinforced concrete (RC) structures: A review. Archives of Computational Methods in Engineering, 2019, 26: 733–767

Fertal M, Leone K. Applications of Blast/FX, an explosive effects analysis software tool. In: Proceedings IEEE 34th Annual 2000 International Carnahan Conference. Ottawa: IEEE, 2000, 218–221

Conrath E J. Structural design for physical security: State of the practice. American Society of Civil Engineers, 1999

Federal Emergency Management Agency (FEMA428). Explosive Blast. Washington: US department of Homeland Security, 2004

Morrill K, Malvar L, Crawford J, Ferritto J. Blast resistant design and retrofit of reinforced concrete columns and walls. In: Proceedings of the 2004 Structures Congress—Building on the Past: Securing the Future. Nashville: American Society of Civil Engineers, 2004, 1–8

Xu J, Wu C, Xiang H, Su Y, Li Z X, Fang Q, Hao H, Liu Z, Zhang Y, Li J. Behaviour of ultra high performance fibre reinforced concrete columns subjected to blast loading. Engineering Structures, 2016, 118: 97–107

Al-Thairy H. A modified single degree of freedom method for the analysis of building steel columns subjected to explosion induced blast load. International Journal of Impact Engineering, 2016, 94: 120–133

Zhang F, Wu C, Zhao X L, Heidarpour A, Li Z. Experimental and numerical study of blast resistance of square CFDST columns with steel-fibre reinforced concrete. Engineering Structures, 2017, 149: 50–63

Karlos V, Solomos G. Calculation of Blast Loads for Application to Structural Components. Luxembourg: Publications Office of the European Union, 2013

Alipour R, Izman S, Tamin M N. Estimation of Charge Mass for High Speed Forming of Circular Plates Using Energy Method. Advanced Materials Research, 2014, 845: 803–808

Abedini M, Mutalib A A. Investigation into damage criterion and failure modes of RC structures when subjected to extreme dynamic loads. Archives of Computational Methods in Engineering, 2020, 27: 501–515

Ngo T, Mendis P, Gupta A, Ramsay J. Blast loading and blast effects on structures—An overview. Electronic Journal of Structural Engineering, 2007, 7: 76–91

Almusallam T H, Elsanadedy H, Abbas H, Ngo T, Mendis P. Numerical analysis for progressive collapse potential of a typical framed concrete building. International Journal of Civil & Environmental Engineer, 2010, 10: 40–46

Remennikov A M. A review of methods for predicting bomb blast effects on buildings. Journal of Battlefield Technology, 2003, 6(3): 5–10

UFC-3-340-02. Design of structures to resist the effects of accidental explosions. US Army Corps of Engineers, Naval Facilities Engineering Command. Washington, D.C.: Air Force Civil Engineer Support Agency, Dept of the Army and Defense Special Weapons Agency, 2008.

Baylot J T, Bevins T L. Effect of responding and failing structural components on the airblast pressures and loads on and inside of the structure. Computers & Structures, 2007, 85(11–14): 891–910

Abedini M, Mutalib A A, Raman S N, Akhlaghi E, Mussa M H, Ansari M. Numerical investigation on the non-linear response of reinforced concrete (RC) columns subjected to extreme dynamic loads. Journal of Asian Scientific Research, 2017, 7(3): 86–98

LS-DYNA. Keyword User’s Manual V971, CA: Livermore Software Technology Corporation (LSTC). Livermore, CA: LS-DYNA, 2015

Mussa M H, Mutalib A A, Hamid R, Naidu S R, Radzi N A M, Abedini M. Assessment of damage to an underground box tunnel by a surface explosion. Tunnelling and Underground Space Technology, 2017, 66: 64–76

Mutalib A A, Hao H. Development of P-I diagrams for FRP strengthened RC columns. International Journal of Impact Engineering, 2011, 38: 290–304

Malvar L J, Crawford J E, Wesevich J W, Simons D. A plasticity concrete material model for DYNA3D. International Journal of Impact Engineering, 1997, 19(9–10): 847–873

Soden P, Hinton M, Kaddour A. Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates. Composites Science and Technology, 1998, 58(7): 1011–1022

Mutalib A A, Hao H. Numerical analysis of FRP-composite-strengthened RC panels with anchorages against blast loads. Journal of Performance of Constructed Facilities, 2011, 25(5): 360–372

Bobaru F, Mehrmashadi J, Chen Z, Niazi S. Intraply fracture in fiber-reinforced composites: A peridynamic analysis. In: The ASC 33rd Annual Technical Conference & 18th US-Japan Conference on Composite Materials. Seattle, 2018

Rabczuk T, Belytschko T. A three-dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 2007, 196: 2777–2799

Rabczuk T, Belytschko T. Cracking particles: A simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 2004, 61(13): 2316–2343

Wang B L, Guo Y B, Zhang C W. Cracking and thermal shock resistance of a Bi2Te3 based thermoelectric material. Engineering Fracture Mechanics, 2016, 152: 1–9

Zhang C W, Li L Y, Ou J P. Swinging motion control of suspended structures: Principles and applications. Structural Control and Health Monitoring, 2010, 17(5): 549–562

Behzadinasab M, Vogler T J, Peterson A M, Rahman R, Foster J T. Peridynamics modeling of a shock wave perturbation decay experiment in granular materials with intra-granular fracture. Journal of Dynamic Behavior of Materials, 2018, 4(4): 529–542

Mehrmashhadi J, Tang Y, Zhao X, Xu Z, Pan J J, Le Q V, Bobaru F. The effect of solder joint microstructure on the drop test failure—A peridynamic analysis. IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2019, 9(1): 58–71

Watstein D. Effect of straining rate on the compressive strength and elastic properties of concrete. Journal Proceedings, 1953, 49(4): 729–744

Jones P G, Richart F. The effect of testing speed on strength and elastic properties of concrete. Proceedings, 1936, 36: 380–392

Glanville W H, Grime G, Fox E N, Davies W W. An Investigation of the Stresses in Reinforced Concrete Piles During Driving. HM Stationery Office, 1938

Comit Euro-International du Beton (CEB). CEB-FIP model code 1990: Design code. Telford, 1993

Abedini M, Mutalib A A, Raman S N, Akhlaghi E. Modeling the effects of high strain rate loading on RC columns using Arbitrary Lagrangian Eulerian (ALE) technique. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 2018, 34: 1–23

Abedini M, Mutalib A, Raman S, Baharom S, Nouri J. Prediction of residual axial load carrying capacity of reinforced concrete (RC) columns subjected to extreme dynamic loads. American Journal of Engineering and Applied Sciences, 2017, 10(2): 431–448

Mutalib A A, Mohd Tawil N, Baharom S, Abedini M. Failure probabilities of FRP strengthened RC column to blast loads. Jurnal Teknologi, 2013, 65(2): 135–141

Marsh K, Campbell J. The effect of strain rate on the post-yield flow of mild steel. Journal of the Mechanics and Physics of Solids, 1963, 11(1): 49–63

Alipour R, Frokhi Nejad A, Izman S, Tamin M. Computer aided design and analysis of conical forming dies subjected to blast load. Applied Mechanics and Materials, 2015, 735: 50–56

Malvar L J. Review of static and dynamic properties of steel reinforcing bars. ACI Materials Journal, 1998, 95(5): 609–616

Abedini M, Mutalib A A, Raman S N. PI diagram generation for reinforced concrete (RC) columns under high impulsive loads using ALE method. Journal of Asian Scientific Research, 2017, 7(7): 253–262

Spacone E, Limkatanyu S. Responses of reinforced concrete members including bond-slip effects. Structural Journal, 2000, 97: 831–839

Luccioni B M, López D E, Danesi R F. Bond-slip in reinforced concrete elements. Journal of Structural Engineering, 2005, 131(11): 1690–1698

Fanning P. Nonlinear models of reinforced and post-tensioned concrete beams. Electronic Journal of Structural Engineering, 2001, 1: 111–119

Tavárez F A. Simulation of Behavior of Composite Grid Reinforced Concrete Beams Using Explicit Finite Element Methods. Madison: University of Wisconsin-Madison, 2001

Abedini M, Mutalib A A, Baharom S, Hao H. Reliability analysis of PI diagram formula for RC column subjected to blast load. In: Proceedings of World Academy of Science, Engineering and Technology. Kuala Lumpur, 2013, 665

Mutalib A A, Abedini M, Baharom S, Hao H. Derivation of empirical formulae to predict pressure and impulsive asymptotes for PI diagrams of one-way RC panels. In: Proceedings of World Academy of Science, Engineering and Technology. Kuala Lumpur, 2013, 661

Mutalib A A, Hao H. The effect of anchorages on FRP strengthening of RC walls to resist blast loads. Applied Mechanics and Materials, 2011, 82: 497–502

TM5-1300. Structures to Resist the Effects of the Accidental Explosions. New Jersey: US Department of Army, Picatinny Arsenal, 1990

Smith S J, McCann D M, Kamara M E. Blast Resistant Design Guide for Reinforced Concrete Structures. Skokie: Portland Cement Association, 2009