Laboratory large-scale pullout investigation of a new reinforcement of composite geosynthetic strip

Abdelouhab, 2010, Physical and analytical modelling of geosynthetic strip pull-out behaviour, Geotext. Geomembranes, 28, 44, 10.1016/j.geotexmem.2009.09.018 Abdelouhab, 2011, Numerical analysis of the behaviour of mechanically stabilized earth walls reinforced with different types of strips, Geotext. Geomembranes, 29, 116, 10.1016/j.geotexmem.2010.10.011 Abdelouhab, 2012, Modélisation numérique bidimensionnelle de murs en Terre Armée, European Journal of Environmental and Civil Engineering, 16, 1, 10.1080/19648189.2012.666908 Abdi, 2011, Pullout tests conducted on clay reinforced with geogrid encapsulated in thin layers of sand, Geotext. Geomembranes, 29, 588, 10.1016/j.geotexmem.2011.04.004 Abdi, 2014, Experimental and numerical analysis of large scale pull out tests conducted on clays reinforced with geogrids encapsulated with coarse material, Geotext. Geomembranes, 42, 494, 10.1016/j.geotexmem.2014.07.008 Abichou, 2004, Behavior of a soil-tire shreds backfill for modular block-wall, 162 Alam, 2014, Pull-out behaviour of steel grid soil reinforcement embedded in silty sand, Comput. Geotech., 56, 216, 10.1016/j.compgeo.2013.12.004 Alfaro, 1995, Pullout interaction mechanism of geogrid strip reinforcement, Geosynth. Int., 2, 679, 10.1680/gein.2.0030 ASTM D2487–11, 2011 ASTM D3080M–11, 2011 ASTM D422–63, 2007 ASTM D4254–16, 2016 ASTM D6706-01, 2013 ASTM D698–07, 2007 ASTM D854–14, 2014 Balunaini, 2009, Interaction of ribbed-metal-strip reinforcement with tire shred–sand mixtures, Geotech. Geol. Eng., 28, 147, 10.1007/s10706-009-9288-6 Balunaini, 2014, Pullout response of uniaxial geogrid in tire shred–sand mixtures, Geotech. Geol. Eng., 32, 505, 10.1007/s10706-014-9731-1 Bandyopadhyay, 2015, Performance of sand and shredded rubber tire mixture as a natural base isolator for earthquake protection, Earthq. Eng. Eng. Vib., 14, 683, 10.1007/s11803-015-0053-y Bathurst, 2012, LRFD calibration of the ultimate pullout limit state for geogrid reinforced soil retaining walls, Int. J. GeoMech., 12, 399, 10.1061/(ASCE)GM.1943-5622.0000219 Berg, 2009 Bergado, 1987, Laboratory pull-out tests using bamboo and polymer geogrids including a case study, Geotext. Geomembranes, 5, 153, 10.1016/0266-1144(87)90015-X Bergado, 1996, Prediction of pullout resistance and pullout force-displacement relationship for inextensible grid reinforcements, Soils Found., 36, 11, 10.3208/sandf.36.4_11 Bergado, 1992, Pullout tests using steel grid reinforcements with low-quality backfill, Int. J. Geotech. Eng., 118, 1047, 10.1061/(ASCE)0733-9410(1992)118:7(1047) Bergado, 1993, Interaction behaviour of steel grid reinforcements in a clayey sand, Geotechnique, 43, 589, 10.1680/geot.1993.43.4.589 Bosscher, 1997, Design of highway embankments using tire chips, J. Geotech. Geoenviron., 123, 295, 10.1061/(ASCE)1090-0241(1997)123:4(295) Cardile, 2017, Modelling interference between the geogrid bearing members under pullout loading conditions, Geotext. Geomembranes, 45, 169, 10.1016/j.geotexmem.2017.01.008 Chegenizadeh, 2018, Influence of recycled tyre amendment on the mechanical behaviour of soil-bentonite cut-off walls, J. Clean. Prod., 177, 507, 10.1016/j.jclepro.2017.12.268 Cristelo, 2015, Monitoring and numerical modelling of an instrumented mechanically stabilised earth wall, Geosynth. Int., 23, 48, 10.1680/jgein.15.00032 Edeskär, 2006 Esfandiari, 2012, Laboratory investigation on the effect of transverse member on pull out capacity of metal strip reinforcement in sand, Geotext. Geomembranes, 35, 41, 10.1016/j.geotexmem.2012.07.002 Fannin, 1993, On the pullout resistance of geosynthetics, Can. Geotech. J., 30, 409, 10.1139/t93-036 Farrag, 1993, Pull-out resistance of geogrid reinforcements, Geotext. Geomembranes, 12, 133, 10.1016/0266-1144(93)90003-7 Ghaaowd, 2020, Pullout of geogrids from tire-derived aggregate having large particle size, Geosynth. Int., 27, 671, 10.1680/jgein.20.00009 Gurung, 1999, Numerical simulation of pullout response for planar soil reinforcements, Can. Geotech. J., 36, 455, 10.1139/t99-006 Han, 2018, Laboratory investigation of particle size effects on the shear behavior of aggregate-geogrid interface, Construct. Build. Mater., 158, 1015, 10.1016/j.conbuildmat.2017.10.045 Hataf, 2006, Experimental investigation of bearing capacity of sand reinforced with randomly distributed tire shreds, Construct. Build. Mater., 20, 910, 10.1016/j.conbuildmat.2005.06.019 Hatami, 2013, Influence of in-isolation properties of geogrids on their pullout performance in a dense graded aggregate, Indian Geotech. J., 43, 303, 10.1007/s40098-013-0060-8 Horpibulsuk, 2010, Pullout resistance of bearing reinforcement embedded in sand, Soils Found., 50, 215, 10.3208/sandf.50.215 Jewell, 1984, 18 Jewell, 1987, Direct shear tests on reinforced sand, Geotechnique, 37, 53, 10.1680/geot.1987.37.1.53 Khedkar, 2009, Pullout behaviour of cellular reinforcements, Geotext. Geomembranes, 27, 262, 10.1016/j.geotexmem.2008.12.003 Lee, 1999, Shredded tires and rubber-sand as lightweight backfill, J. Geotech. Geoenviron., 125, 132, 10.1061/(ASCE)1090-0241(1999)125:2(132) Liu, 2009, Large scale direct shear tests of soil/PET-yarn geogrid interfaces, Geotext. Geomembranes, 27, 19, 10.1016/j.geotexmem.2008.03.002 Lo, 1998, Pull-out resistance of polyester straps at low overburden stress, Geosynth. Int., 5, 361, 10.1680/gein.5.0126 Lopes, 1996, Influence of the confinement, soil density and displacement rate on soil-geogrid interaction, Geotext. Geomembranes, 14, 543, 10.1016/S0266-1144(97)83184-6 Lopes, 1996, Role of specimen geometry, soil height, and sleeve length on the pull-out behaviour of geogrids, Geosynth. Int., 3, 701, 10.1680/gein.3.0081 Lopes, 1999, Soil-geosynthetic interaction-influence of soil particle size and geosynthetic structure, Geosynth. Int., 6, 261, 10.1680/gein.6.0153 Lupo, 1990, Defining material response with the uniaxial-biaxiai test. Rock Mechanics Contributions and Challenges Mirmoradi, 2016, Evaluation of the combined effect of toe resistance and facing inclination on the behavior of GRS walls, Geotext. Geomembranes, 44, 287, 10.1016/j.geotexmem.2015.12.003 Mohan, 2016, Pullout capacity of ladder-type metal reinforcements in tire shred-sand mixtures, Construct. Build. Mater., 113, 544, 10.1016/j.conbuildmat.2016.02.160 Moraci, 2006, A simple method to evaluate the pullout resistance of extruded geogrids embedded in a compacted granular soil, Geotext. Geomembranes, 24, 116, 10.1016/j.geotexmem.2005.11.001 Moraci, 2006, Factors affecting the pullout behaviour of extruded geogrids embedded in a compacted granular soil, Geotext. Geomembranes, 24, 220, 10.1016/j.geotexmem.2006.03.001 Mosallanezhad, 2016, Performance of the new reinforcement system in the increase of shear strength of typical geogrid interface with soil, Geotext. Geomembranes, 44, 457, 10.1016/j.geotexmem.2015.07.005 Mosallanezhad, 2015, Novel strip-anchor for pull-out resistance in cohesionless soils, Measurement, 62, 187, 10.1016/j.measurement.2014.10.046 Mosallanezhad, 2016, Experimental and numerical studies of the performance of the new reinforcement system under pull-out conditions, Geotext. Geomembranes, 44, 70, 10.1016/j.geotexmem.2015.07.006 Ochiai, 1992, Evaluation of pull-out resistance of geogrid reinforced soils, Proceedings of Earth Reinforcement Practice, 146 Palmeira, 2004, Bearing force mobilisation in pull-out tests on geogrids, Geotext. Geomembranes, 22, 481, 10.1016/j.geotexmem.2004.03.007 Palmeira, 2009, Soil–geosynthetic interaction: modelling and analysis, Geotext. Geomembranes, 27, 368, 10.1016/j.geotexmem.2009.03.003 Palmeria, 1989, Scale and other factors affecting the results of pull-out tests of grids buried in sand, Geotechnique, 39, 511, 10.1680/geot.1989.39.3.511 Peterson, 1980 Razzazan, 2018, Pullout behavior of polymeric strip in compacted dry granular soil under cyclic tensile load conditions, J. Rock Mech. Geotech. Eng., 10, 968, 10.1016/j.jrmge.2018.04.007 Razzazan, 2019, Large-scale pullout testing and numerical evaluation of U-shape polymeric straps, Geosynth. Int., 26, 1, 10.1680/jgein.19.00001 Reddy, 1998, Characterization and performance assessment of shredded scrap tires as leachate drainage material in landfills, 407 Sadat, 2018, Study of the behavior of mechanically stabilized earth (MSE) walls subjected to differential settlements, Geotext. Geomembranes, 46, 77, 10.1016/j.geotexmem.2017.10.006 Sadat-Taghavi, 2017, Experimental analysis of large-scale pullout tests conducted on polyester anchored geogrid reinforcement systems, Can. Geotech. J., 54, 621, 10.1139/cgj-2016-0365 Saghebfar, 2017, Performance monitoring of geosynthetic reinforced soil integrated bridge system (GRS-IBS) in Louisiana, Geotext. Geomembranes, 45, 34, 10.1016/j.geotexmem.2016.11.004 Senetakis, 2015, Effects of state of test sample, specimen geometry and sample preparation on dynamic properties of rubber–sand mixtures, Geosynth. Int., 22, 301, 10.1680/gein.15.00013 Shrestha, 2016, Design and analysis of retaining wall backfilled with shredded tire and subjected to earthquake shaking, Soil Dynam. Earthq. Eng., 90, 227, 10.1016/j.soildyn.2016.08.034 Suksiripattanapong, 2013, Pullout resistance of bearing reinforcement embedded in coarse-grained soils, Geotext. Geomembranes, 36, 44, 10.1016/j.geotexmem.2012.10.008 Tajabadipour, 2019, Laboratory pullout investigation for evaluate feasibility use of scrap tire as reinforcement element in mechanically stabilized earth walls, J. Clean. Prod., 237, 117726, 10.1016/j.jclepro.2019.117726 Tajabadipour, 2017, Effect of rubber tire chips-sand mixtures on performance of geosynthetic reinforced earth walls, Period. Polytech-Civ., 61, 322, 10.3311/PPci.9539 Teixeira, 2007, Pullout resistance of individual longitudinal and transverse geogrid ribs, J. Geotech. Geoenviron., 133, 37, 10.1061/(ASCE)1090-0241(2007)133:1(37) Tsang, 2008, Seismic isolation by rubber–soil mixtures for developing countries, Earthq. Eng. Struct. Dynam., 37, 283, 10.1002/eqe.756 Wang, 2015, Experimental study on seismic response of geogrid reinforced rigid retaining walls with saturated backfill sand, Geotext. Geomembranes, 43, 35, 10.1016/j.geotexmem.2014.11.006 Yazdandoust, 2017, Investigation on the seismic performance of steel-strip reinforced-soil retaining walls using shaking table test, Soil Dynam. Earthq. Eng., 97, 216, 10.1016/j.soildyn.2017.03.011 Yoon, 2004, Bearing capacity and settlement of tire-reinforced sands, Geotext. Geomembranes, 22, 439, 10.1016/j.geotexmem.2003.12.002 Yu, 2017, Influence of selection of soil and interface properties on numerical results of two soil-geosynthetic interaction problems, Int. J. GeoMech., 17, 10.1061/(ASCE)GM.1943-5622.0000847