Laboratory evaluation of waterborne epoxy bitumen emulsion for pavement preventative maintenance application

Cuadri, 2016, Formulation and processing of recycled-low-density-polyethylene-modified bitumen emulsions for reduced-temperature asphalt technologies, Chem. Eng. Sci., 156, 197, 10.1016/j.ces.2016.09.018

Mamlouk, 2014, Verification of effectiveness of chip seal as a pavement preventive maintenance treatment using LTPP data, Int. J. Pavement Eng., 15, 879, 10.1080/10298436.2014.893318

Gingras, 2005, Effect of process parameters on bitumen emulsions, Chem. Eng. Process. Process Intensif., 44, 979, 10.1016/j.cep.2005.01.003

Khattak, 2013, Performance of preventive maintenance treatments of flexible pavements, Int. J. Pavement Res. Technol., 6, 184

Al Nageim, 2012, A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials, Constr. Build. Mater., 36, 743, 10.1016/j.conbuildmat.2012.06.032

Lesueur, 2011, 25

McNally, 2011

Forbes, 2001, Studies of the microstructure of polymer-modified bitumen emulsions using confocal laser scanning microscopy, J. Microsc., 204, 252, 10.1046/j.1365-2818.2001.00955.x

Khadivar, 2013, Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures, Constr. Build. Mater., 47, 1099, 10.1016/j.conbuildmat.2013.05.093

Abedini, 2017, Low-temperature adhesion performance of polymer-modified Bitumen emulsion in chip seals using different SBR latexes, Pet. Sci. Technol., 35, 59, 10.1080/10916466.2016.1238932

Li, 2012, A study on the preparation and storage stability of modified emulsified asphalt, Pet. Sci. Technol., 30, 699, 10.1080/10916466.2010.490812

Samanos, 2003, Method for preparing a bitumen emulsion, corresponding bitumen emulsion and use thereof, Google Patents

Abedini, 2016, The rheological properties of a bitumen emulsion modified with two types of SBR latex, Pet. Sci. Technol., 34, 1589, 10.1080/10916466.2016.1214600

Xia, 2017, Modification of bitumen emulsion via heterocoagulation with SIS triblock copolymer latex, J. Appl. Polym. Sci., 134, 10.1002/app.45510

Wu, 2017, Long-term durability of epoxy-modified open-graded porous asphalt wearing course, Int. J. Pavement Eng., 1

Qian, 2015, Design and laboratory evaluation of small particle porous epoxy asphalt surface mixture for roadway pavements, Constr. Build. Mater., 77, 110, 10.1016/j.conbuildmat.2014.12.056

Yin, 2015, Performance of hot mix epoxy asphalt binder and its concrete, Mater. Struct., 48, 3825, 10.1617/s11527-014-0442-0

Kang, 2015, Rheological behaviors of epoxy asphalt binder in comparison of base asphalt binder and SBS modified asphalt binder, Constr. Build. Mater., 76, 343, 10.1016/j.conbuildmat.2014.12.020

Wang, 2013, Influence of freeze–thaw cycles on properties of asphalt-modified epoxy repair materials, Constr. Build. Mater., 41, 580, 10.1016/j.conbuildmat.2012.12.056

Polacco, 2015, A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility, Adv. Colloid Interface Sci., 224, 72, 10.1016/j.cis.2015.07.010

Hsieh, 2010, The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles, Polymer, 51, 6284, 10.1016/j.polymer.2010.10.048

Zhang, 2015, Influence of aggregate mineralogical composition on water resistance of aggregate–bitumen adhesion, Int. J. Adhes. Adhes., 62, 45, 10.1016/j.ijadhadh.2015.06.012