LBM simulations of PEM fuel cells

Andisheh-Tadbir, 2016, Three-dimensional phase segregation of micro-porous layers for fuel cells by nano-scale X-ray computed tomography, J Power Sources, 310, 61, 10.1016/j.jpowsour.2016.02.001 Ashorynejad, 2016, Investigation of a waveform cathode channel on the performance of a PEM fuel cell by means of a pore-scale multi-component lattice Boltzmann method, J Taiwan Inst Chem Eng, 66, 126, 10.1016/j.jtice.2016.06.001 Ashorynejad, 2016, The effect of pulsating pressure on the performance of a PEM fuel cell with a wavy cathode surface, Int J Hydrogen Energy, 41, 14239, 10.1016/j.ijhydene.2016.05.291 Avcioglu, 2015, High performance PEM fuel cell catalyst layers with hydrophobic channels, Int J Hydrogen Energy, 40, 7720, 10.1016/j.ijhydene.2015.02.004 Barrat, 1999, Large slip effect at a nonwetting fluid-solid interface, Phys Rev Lett, 82, 4671, 10.1103/PhysRevLett.82.4671 Bednarek, 2017, Calculation of effective transport properties of partially saturated gas diffusion layers, J Power Sources, 340, 111, 10.1016/j.jpowsour.2016.10.098 Ben Amara, 2015, Numerical simulation of droplet dynamics in a proton exchange membrane (PEMFC) fuel cell micro-channel, Int J Hydrogen Energy, 40, 1333, 10.1016/j.ijhydene.2014.09.077 Ben Salah, 2012, Two phase flow simulation in a channel of a polymer electrolyte membrane fuel cell using the lattice Boltzmann method, J Power Sources, 199, 85, 10.1016/j.jpowsour.2011.10.053 Ben, 2012, Gas channel optimisation for PEM fuel cell using the lattice Boltzmann method, Energy Procedia, 28, 125, 10.1016/j.egypro.2012.08.046 Benzi, 2009, Mesoscopic lattice Boltzmann modeling of soft-glassy systems: theory and simulations, J Chem Phys, 131, 104903, 10.1063/1.3216105 Benzi, 2010, Herschel-Bulkley rheology from lattice kinetic theory of soft glassy materials, Europhys Lett, 91, 14003, 10.1209/0295-5075/91/14003 Bernardi, 1992, A mathematical model of the solid-polymer-electrolyte fuel cell, J Electrochem Soc, 139, 2477, 10.1149/1.2221251 Branco, 2016, New approaches towards novel composite and multilayer membranes for intermediate temperature-polymer electrolyte fuel cells and direct methanol fuel cells, J Power Sources, 316, 139, 10.1016/j.jpowsour.2016.03.052 Chen, 2016, Impact of PTFE content and distribution on liquid–gas flow in PEMFC carbon paper gas distribution layer: 3D lattice Boltzmann simulations, Int J Hydrogen Energy, 41, 8550, 10.1016/j.ijhydene.2016.02.159 Chen, 2007, Flow distribution in the manifold of PEM fuel cell stack, J Power Sources, 173, 249, 10.1016/j.jpowsour.2007.05.007 Chen, 2012, Pore-scale flow and mass transport in gas diffusion layer of proton exchange membrane fuel cell with interdigitated flow fields, Int J Therm Sci, 51, 132, 10.1016/j.ijthermalsci.2011.08.003 Chen, 2012, Coupling between finite volume method and lattice Boltzmann method and its application to fluid flow and mass transport in proton exchange membrane fuel cell, Int J Heat Mass Transf, 55, 3834, 10.1016/j.ijheatmasstransfer.2012.02.020 Chen, 2012, Numerical investigation of liquid water transport and distribution in porous gas diffusion layer of a proton exchange membrane fuel cell using lattice Boltzmann method, Russ J Electrochem, 48, 712, 10.1134/S1023193512070026 Chen, 2013, Multi-scale modeling of proton exchange membrane fuel cell by coupling finite volume method and lattice Boltzmann method, Int J Heat Mass Transf, 63, 268, 10.1016/j.ijheatmasstransfer.2013.03.048 Chen, 2014, A critical review of the pseudopotential multiphase lattice Boltzmann model: methods and applications, Int J Heat Mass Transf, 76, 210, 10.1016/j.ijheatmasstransfer.2014.04.032 Chen, 2015, Lattice Boltzmann pore-scale investigation of coupled physical-electrochemical processes in C/Pt and non-precious metal cathode catalyst layers in proton exchange membrane fuel cells, Electrochim Acta, 158, 175, 10.1016/j.electacta.2015.01.121 Chibbaro, 2008, Lattice Boltzmann models for nonideal fluids with arrested phase-separation, Phys Rev E, 77, 36705, 10.1103/PhysRevE.77.036705 Cussler, 2009 Dicks, 2006, The role of carbon in fuel cells, J Power Sources, 156, 128, 10.1016/j.jpowsour.2006.02.054 Ding, 2007, Diffuse interface model for incompressible two-phase flows with large density ratios, J Comput Phys, 226, 2078, 10.1016/j.jcp.2007.06.028 Doi, 1991, Dynamics and rheology of complex interfaces. I, J Chem Phys, 95, 1242, 10.1063/1.461156 Doyle M, Rajendran G. Perfluorinated membranes. In Handbook of fuel cells—fundamentals, technology and applications, W. Vielstich, A. Lamm, and H.A. Gasteiger, Eds., Wiley, New York, 2003, pp. 351–395. El-kharouf, 2012, Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells, J Power Sources, 218, 393, 10.1016/j.jpowsour.2012.06.099 El-kharouf, 2012, Proton exchange membrane fuel cell degradation and testing: review, J Energy Inst, 85, 188, 10.1179/1743967112Z.00000000036 Espinoza, 2015, Compress effects on porosity, gas-phase tortuosity, and gas permeability in a simulated PEM gas diffusion layer, Int J Energy Res, 39, 1528, 10.1002/er.3348 Flipo, 2016, Clarification of the surface wettability effects on two-phase flow patterns in PEMFC gas channels, Int J Hydrogen Energy, 41, 15518, 10.1016/j.ijhydene.2016.04.008 Froning, 2013, 3D analysis, modeling and simulation of transport processes in compressed fibrous microstructures, using the Lattice Boltzmann method, Electrochim Acta, 110, 325, 10.1016/j.electacta.2013.04.071 Froning, 2016, Impact of compression on gas transport in non-woven gas diffusion layers of high temperature polymer electrolyte fuel cells, J Power Sources, 318, 26, 10.1016/j.jpowsour.2016.03.102 Gao, 2015, Using MRT lattice Boltzmann method to simulate gas flow in simplified catalyst layer for different inlet–outlet pressure ratio, Int J Heat Mass Transf, 88, 122, 10.1016/j.ijheatmasstransfer.2015.04.031 Gao, 2012, An improved MRT lattice Boltzmann model for calculating anisotropic permeability of compressed and uncompressed carbon cloth gas diffusion layers based on X-Ray computed micro-tomography, J Fuel Cell Sci Technol, 9, 41010, 10.1115/1.4006796 Gao, 2012, Calculating the anisotropic permeability of porous media using the lattice Boltzmann method and X-ray computed tomography, Transp Porous Media, 92, 457, 10.1007/s11242-011-9914-7 Gao, 2012, Modeling fluid flow in the gas diffusion layers in PEMFC using the multiple relaxation-time lattice Boltzmann method, Fuel Cells, 12, 365, 10.1002/fuce.201000074 Gao, 2013, Lattice Boltzmann simulation of water and gas flow in porous gas diffusion layers in fuel cells reconstructed from micro-tomography, Comput Math Appl, 65, 891, 10.1016/j.camwa.2012.08.006 Gao, 2018, The impact of sample size on transport properties of carbon-paper and carbon-cloth GDLs: direct simulation using the lattice Boltzmann model, Int J Heat Mass Transf, 118, 1325, 10.1016/j.ijheatmasstransfer.2017.11.003 García-Salaberri, 2015, Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: effect of local saturation and application to macroscopic continuum models, J Power Sources, 296, 440, 10.1016/j.jpowsour.2015.07.034 Gasteiger, 2005, Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs, Appl. Catal. B Environ, 56, 9, 10.1016/j.apcatb.2004.06.021 Ginzburg, 2001, Two-phase flows on interface refined grids modeled with VOF, staggered finite volumes, and spline interpolants, J Comput Phys, 166, 302, 10.1006/jcph.2000.6655 Han, 2012, Lattice Boltzmann simulation of liquid water transport in turning regions of serpentine gas channels in proton exchange membrane fuel cells, J Power Sources, 217, 268, 10.1016/j.jpowsour.2012.06.010 Han, 2013, Numerical studies of interfacial phenomena in liquid water transport in polymer electrolyte membrane fuel cells using the lattice Boltzmann method, Int J Hydrogen Energy, 38, 5053, 10.1016/j.ijhydene.2013.02.055 Han, 2012, Lattice Boltzmann simulations of liquid droplets development and interaction in a gas channel of a proton exchange membrane fuel cell, J Power Sources, 202, 175, 10.1016/j.jpowsour.2011.11.071 Hao, 2009, Lattice Boltzmann simulations of anisotropic permeabilities in carbon paper gas diffusion layers, J Power Sources, 186, 104, 10.1016/j.jpowsour.2008.09.086 Hao, 2009, Lattice Boltzmann simulations of liquid droplet dynamic behavior on a hydrophobic surface of a gas flow channel, J Power Sources, 190, 435, 10.1016/j.jpowsour.2009.01.029 Hao, 2010, Lattice Boltzmann simulations of water transport in gas diffusion layer of a polymer electrolyte membrane fuel cell, J Power Sources, 195, 3870, 10.1016/j.jpowsour.2009.11.125 Hao, 2010, Pore-scale simulations on relative permeabilities of porous media by lattice Boltzmann method, Int J Heat Mass Transf, 53, 1908, 10.1016/j.ijheatmasstransfer.2009.12.066 Hao, 2012, Capillary pressures in carbon paper gas diffusion layers having hydrophilic and hydrophobic pores, Int J Heat Mass Transf, 55, 133, 10.1016/j.ijheatmasstransfer.2011.08.049 Huang, 2008, Water slippage versus contact angle: a quasiuniversal relationship, Phys Rev Lett, 101, 226101, 10.1103/PhysRevLett.101.226101 Inamuro, 2004, A lattice Boltzmann method for incompressible two-phase flows with large density differences, J Comput Phys, 198, 628, 10.1016/j.jcp.2004.01.019 Inoue, 2016, Theoretical examination of effective oxygen diffusion coefficient and electrical conductivity of polymer electrolyte fuel cell porous components, J Power Sources, 327, 610, 10.1016/j.jpowsour.2016.07.107 Iranzo, 2014, Liquid water preferential accumulation in channels of PEM fuel cells with multiple serpentine flow fields, Int J Hydrogen Energy, 39, 15687, 10.1016/j.ijhydene.2014.07.101 Iranzo, 2016, PEM fuel cell operation under air and O2 feed: analysis of cell performance and liquid water distributions, Fuel Cells, 16, 463, 10.1002/fuce.201500145 Jahnke, 2016, Performance and degradation of proton exchange membrane fuel cells: state of the art in modeling from atomistic to system scale, J Power Sources, 304, 207, 10.1016/j.jpowsour.2015.11.041 James Larminie, 2003 Jaouen, 2011, Recent advances in non-precious metal catalysis for oxygen-reduction reaction in polymer electrolyte fuel cells, Energ Environ Sci, 4, 114, 10.1039/C0EE00011F Jeon, 2015, Effect of compression on water transport in gas diffusion layer of polymer electrolyte membrane fuel cell using lattice Boltzmann method, J Power Sources, 294, 393, 10.1016/j.jpowsour.2015.06.080 Jinuntuya, 2014, The impacts of image resolution on permeability simulation of gas diffusion layer using lattice Boltzmann method, ECS Trans, 48, 93, 10.1149/04801.0093ecst Kamali, 2012, A multi-component two-phase lattice Boltzmann method applied to a 1-D Fischer–Tropsch reactor, Chem Eng J, 207–208, 587, 10.1016/j.cej.2012.07.019 Khajeh-Hosseini-Dalasm, 2010, A parametric study of cathode catalyst layer structural parameters on the performance of a PEM fuel cell, Int J Hydrogen Energy, 35, 2417, 10.1016/j.ijhydene.2009.12.111 Khandelwal, 2006, Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials, J Power Sources, 161, 1106, 10.1016/j.jpowsour.2006.06.092 Kim, 2009, Reconstruction and effective transport properties of the catalyst layer in PEM fuel cells, J Electrochem Soc, 156, B673, 10.1149/1.3106136 Kim, 2015, Lattice Boltzmann simulation of liquid water transport in microporous and gas diffusion layers of polymer electrolyte membrane fuel cells, J Power Sources, 278, 703, 10.1016/j.jpowsour.2014.12.044 Koido, 2008, An approach to modeling two-phase transport in the gas diffusion layer of a proton exchange membrane fuel cell, J Power Sources, 175, 127, 10.1016/j.jpowsour.2007.09.029 Koresawa, 2015, Water control by employing microgrooves inside gas channel for performance improvement in polymer electrolyte fuel cells, Int J Hydrogen Energy, 40, 8172, 10.1016/j.ijhydene.2015.04.113 Kozakai, 2016, Improving gas diffusivity with bi-porous flow-field in polymer electrolyte membrane fuel cells, Int J Hydrogen Energy, 41, 13180, 10.1016/j.ijhydene.2016.05.131 Krüger, 2017, vol. 10, 973 Kumbur, 2006, Liquid droplet behavior and instability in a polymer electrolyte fuel cell flow channel, J Power Sources, 161, 333, 10.1016/j.jpowsour.2006.04.093 Kundu, 2006, Morphological features (defects) in fuel cell membrane electrode assemblies, J Power Sources, 157, 650, 10.1016/j.jpowsour.2005.12.027 Kupershtokh, 2009, On equations of state in a lattice Boltzmann method, Comput Math Appl, 58, 965, 10.1016/j.camwa.2009.02.024 Kurtz, 2019 Landau, 1987 Latorrata, 2014, Novel superhydrophobic microporous layers for enhanced performance and efficient water management in PEM fuel cells, Int J Hydrogen Energy, 39, 5350, 10.1016/j.ijhydene.2013.12.199 Li, 2013, Understanding the role of cathode structure and property on water management and electrochemical performance of a PEM fuel cell, Int J Hydrogen Energy, 38, 11988, 10.1016/j.ijhydene.2013.06.130 Li, 2008, A review of water flooding issues in the proton exchange membrane fuel cell, J Power Sources, 178, 103, 10.1016/j.jpowsour.2007.12.068 Litster, 2004, PEM fuel cell electrodes, J Power Sources, 130, 61, 10.1016/j.jpowsour.2003.12.055 Liu, 2016, Multiphase lattice Boltzmann simulations for porous media applications, Comput Geosci, 20, 777, 10.1007/s10596-015-9542-3 Liu, 2019, Interfacial transport characteristics between heterogeneous porous composite media for effective mass transfer in fuel cells, Int J Energy Res, 43, 2990, 10.1002/er.4500 Luo, 2003, Theory of the lattice Boltzmann method: two-fluid model for binary mixtures, Phys Rev E, 67, 36302, 10.1103/PhysRevE.67.036302 Mancusi, 2014, Numerical study of two-phase flow patterns in the gas channel of PEM fuel cells with tapered flow field design, Int J Hydrogen Energy, 39, 2261, 10.1016/j.ijhydene.2013.11.106 Martys, 1996, Simulation of multicomponent fluids in complex three-dimensional geometries by the lattice Boltzmann method, Phys Rev E, 53, 743, 10.1103/PhysRevE.53.743 Mason, 1999, New fundamental concepts in emulsion rheology, Curr Opin Colloid Interface Sci, 4, 231, 10.1016/S1359-0294(99)00035-7 Mathias, 2003, Diffusion media materials and characterisation, vol. 3, 517 Mench, 2008 Molaeimanesh, 2014, A three-dimensional pore-scale model of the cathode electrode in polymer-electrolyte membrane fuel cell by lattice Boltzmann method, J Power Sources, 258, 89, 10.1016/j.jpowsour.2014.02.027 Molaeimanesh, 2014, Water droplet dynamic behavior during removal from a proton exchange membrane fuel cell gas diffusion layer by Lattice-Boltzmann method, Korean J Chem Eng, 31, 598, 10.1007/s11814-013-0282-6 Molaeimanesh, 2014, Impact of PTFE distribution on the removal of liquid water from a PEMFC electrode by lattice Boltzmann method, Int J Hydrogen Energy, 39, 8401, 10.1016/j.ijhydene.2014.03.089 Molaeimanesh, 2014, A three-dimensional pore-scale model of the cathode electrode in polymer-electrolyte membrane fuel cell by lattice Boltzmann method, J Power Sources, 258, 89, 10.1016/j.jpowsour.2014.02.027 Molaeimanesh, 2015, Agglomerate modeling of cathode catalyst layer of a PEM fuel cell by the lattice Boltzmann method, Int J Hydrogen Energy, 40, 5169, 10.1016/j.ijhydene.2015.02.097 Molaeimanesh, 2015, A pore-scale model for the cathode electrode of a proton exchange membrane fuel cell by lattice Boltzmann method, Korean J Chem Eng, 32, 397, 10.1007/s11814-014-0229-6 Molaeimanesh, 2015, Agglomerate modeling of cathode catalyst layer of a PEM fuel cell by the lattice Boltzmann method, Int J Hydrogen Energy, 40, 5169, 10.1016/j.ijhydene.2015.02.097 Molaeimanesh, 2016, Role of wettability and water droplet size during water removal from a PEMFC GDL by lattice Boltzmann method, Int J Hydrogen Energy, 41, 14872, 10.1016/j.ijhydene.2016.06.252 Molaeimanesh, 2017, Investigation of GDL compression effects on the performance of a PEM fuel cell cathode by lattice Boltzmann method, J Power Sources, 359, 494, 10.1016/j.jpowsour.2017.05.078 Molaeimanesh, 2016, Lattice Boltzmann simulation of proton exchange membrane fuel cells—a review on opportunities and challenges, Int J Hydrogen Energy, 41, 22221, 10.1016/j.ijhydene.2016.09.211 Molaeimanesh, 2018, Impact of catalyst layer morphology on the performance of PEM fuel cell cathode via lattice Boltzmann simulation, Int J Hydrogen Energy, 43, 20959, 10.1016/j.ijhydene.2018.09.076 Morimoto, 2012, 423 Mukherjee, 2009, Mesoscopic modeling of two-phase behavior and flooding phenomena in polymer electrolyte fuel cells, Electrochim Acta, 54, 6861, 10.1016/j.electacta.2009.06.066 Mukherjee, 2009, Mesoscopic modeling of two-phase behavior and flooding phenomena in polymer electrolyte fuel cells, Electrochim Acta, 54, 6861, 10.1016/j.electacta.2009.06.066 Nabovati, 2014, Effect of porosity heterogeneity on the permeability and tortuosity of gas diffusion layers in polymer electrolyte membrane fuel cells, J Power Sources, 248, 83, 10.1016/j.jpowsour.2013.09.061 Nam, 2003, Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium, Int J Heat Mass Transf, 46, 4595, 10.1016/S0017-9310(03)00305-3 Niu, 2007, An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model, J Power Sources, 172, 542, 10.1016/j.jpowsour.2007.05.081 O’hayre, 2016 Ogumi, 1984, Gas permeation in SPE method I. Oxygen permeation through Nafion and NEOSEPTA, J Electrochem Soc, 131, 769, 10.1149/1.2115696 Ogumi, 1985, Gas permeation in SPE method II. Oxygen and hydrogen permeation through Nafion, J Electrochem Soc, 132, 2601, 10.1149/1.2113631 Ohser, 2000 Ossiander, 2016, Influence of membrane type and molecular weight distribution on the degradation of PBI-based HTPEM fuel cells, J Membr Sci, 509, 27, 10.1016/j.memsci.2016.02.037 Ostadi, 2010, Influence of threshold variation on determining the properties of a polymer electrolyte fuel cell gas diffusion layer in X-ray nano-tomography, Chem Eng Sci, 65, 2213, 10.1016/j.ces.2009.12.019 Ostadi, 2010, Nanotomography based study of gas diffusion layers, Microelectron Eng, 87, 1640, 10.1016/j.mee.2009.10.027 Ostadi, 2010, 3D reconstruction of a gas diffusion layer and a microporous layer, J Membr Sci, 351, 69, 10.1016/j.memsci.2010.01.031 Ozden, 2016, Proton exchange membrane fuel cell degradation: a parametric analysis using computational fluid dynamics, J Power Sources, 304, 64, 10.1016/j.jpowsour.2015.11.042 Pan, 2006, An evaluation of lattice Boltzmann schemes for porous medium flow simulation, Comput Fluids, 35, 898, 10.1016/j.compfluid.2005.03.008 Park, 2008, Multi-phase micro-scale flow simulation in the electrodes of a PEM fuel cell by lattice Boltzmann method, J Power Sources, 178, 248, 10.1016/j.jpowsour.2007.12.008 Park, 2007, Application of lattice Boltzmann method to a micro-scale flow simulation in the porous electrode of a PEM fuel cell, J Power Sources, 173, 404, 10.1016/j.jpowsour.2007.04.021 Park, 2012, A review of gas diffusion layer in PEM fuel cells: materials and designs, Int J Hydrogen Energy, 37, 5850, 10.1016/j.ijhydene.2011.12.148 Parthasarathy, 1992, Temperature dependence of the electrode kinetics of oxygen reduction at the platinum/Nafion® interface—a microelectrode investigation, J Electrochem Soc, 139, 2530, 10.1149/1.2221258 Pekula, 2005, Study of water distribution and transport in a polymer electrolyte fuel cell using neutron imaging, Nucl. Instrum. Methods Phys. Res. Sect. A, 542, 134, 10.1016/j.nima.2005.01.090 Pestrak, 2010, The effect of mechanical fatigue on the lifetimes of membrane electrode assemblies, J Fuel Cell Sci Technol, 7, 41009, 10.1115/1.4000629 Pukrushpan, 2004 Rahimi-Esbo, 2016, Improving PEM fuel cell performance and effective water removal by using a novel gas flow field, Int J Hydrogen Energy, 41, 3023, 10.1016/j.ijhydene.2015.11.001 Rama, 2010, An X-Ray tomography based lattice Boltzmann simulation study on gas diffusion layers of polymer electrolyte fuel cells, J Fuel Cell Sci Technol, 7, 31012, 10.1115/1.3211096 Rama, 2010, Multiscale simulation of single-phase multicomponent transport in the cathode gas diffusion layer of a polymer electrolyte fuel cell, ECS Trans, 28, 103, 10.1149/1.3496618 Rama, 2011, Determination of the anisotropic permeability of a carbon cloth gas diffusion layer through X-ray computer micro-tomography and single-phase lattice Boltzmann simulation, Int J Numer Methods Fluids, 67, 518, 10.1002/fld.2378 Rama, 2011, A numerical study of structural change and anisotropic permeability in compressed carbon cloth polymer electrolyte fuel cell gas diffusion layers, Fuel Cells, 11, 274, 10.1002/fuce.201000037 Rofaiel, 2012, Heterogeneous through-plane distributions of polytetrafluoroethylene in polymer electrolyte membrane fuel cell gas diffusion layers, J Power Sources, 201, 219, 10.1016/j.jpowsour.2011.11.005 Rosén, 2012, Saturation dependent effective transport properties of PEFC gas diffusion layers, J Electrochem Soc, 159, F536, 10.1149/2.005209jes Salari, 2018, Direct measurement and modeling relative gas diffusivity of PEMFC catalyst layers: the effect of ionomer to carbon ratio, operating temperature, porosity, and pore size distribution, Int J Hydrogen Energy, 43, 16704, 10.1016/j.ijhydene.2018.07.035 Salomov, 2014, Pore-scale modeling of fluid flow through gas diffusion and catalyst layers for high temperature proton exchange membrane (HT-PEM) fuel cells, Comput Math Appl, 67, 393, 10.1016/j.camwa.2013.08.006 Sbragaglia, 2007, Generalized lattice Boltzmann method with multirange pseudopotential, Phys Rev E, 75, 26702, 10.1103/PhysRevE.75.026702 Schladitz, 2006, Design of acoustic trim based on geometric modeling and flow simulation for non-woven, Comput Mater Sci, 38, 56, 10.1016/j.commatsci.2006.01.018 Schulz, 2007, Modeling of two-phase behavior in the gas diffusion medium of PEFCs via full morphology approach, J Electrochem Soc, 154, B419, 10.1149/1.2472547 Shah, 2011, Recent trends and developments in polymer electrolyte membrane fuel cell modelling, Electrochim Acta, 56, 3731, 10.1016/j.electacta.2010.10.046 Shan, 1993, Lattice Boltzmann model for simulating flows with multiple phases and components, Phys Rev E, 47, 1815, 10.1103/PhysRevE.47.1815 Shan, 1994, Simulation of nonideal gases and liquid-gas phase transitions by the lattice Boltzmann equation, Phys Rev E, 49, 2941, 10.1103/PhysRevE.49.2941 Shan, 1995, Multicomponent lattice-Boltzmann model with interparticle interaction, J Stat Phys, 81, 379, 10.1007/BF02179985 Shojaeefard, 2016, A review on microstructure reconstruction of PEM fuel cells porous electrodes for pore scale simulation, Int J Hydrogen Energy, 41, 20276, 10.1016/j.ijhydene.2016.08.179 Sompalli, 2007, Membrane degradation at catalyst layer edges in PEMFC MEAs, J Electrochem Soc, 154, B1349, 10.1149/1.2789791 Soto R: Kinetic theory and transport phenomena, Oxford University Press, 2016:269. Springer, 1991, Polymer electrolyte fuel cell model, J Electrochem Soc, 138, 2334, 10.1149/1.2085971 Stiles, 2012, Lattice Boltzmann simulation of transport phenomena in nanostructured cathode catalyst layer for proton exchange membrane fuel cells, MRS Proc, 1384, 10.1557/opl.2012.322 Stoyan, 1980, Formulas for stationary planar fibre processes II—partially oriented-fibre systems, Stat J Theor Appl Stat, 11, 281 Sukop, 2007 Sukop, 2006 Swift, 1995, Lattice Boltzmann simulation of nonideal fluids, Phys Rev Lett, 75, 830, 10.1103/PhysRevLett.75.830 Swift, 1996, Lattice Boltzmann simulations of liquid-gas and binary fluid systems, Phys Rev E, 54, 5041, 10.1103/PhysRevE.54.5041 Tabe, 2009, Numerical simulation of liquid water and gas flow in a channel and a simplified gas diffusion layer model of polymer electrolyte membrane fuel cells using the lattice Boltzmann method, J Power Sources, 193, 24, 10.1016/j.jpowsour.2009.01.068 Tseng, 2016, Application of metal foams to high temperature PEM fuel cells, Int J Hydrogen Energy, 41, 16196, 10.1016/j.ijhydene.2016.06.149 VanSant, 1983 Vielstich, 2003, vol. 2 von Helmolt, 2007, Fuel cell vehicles: status 2007, J Power Sources, 165, 833, 10.1016/j.jpowsour.2006.12.073 Wang, 2015, Theory and practice of flow field designs for fuel cell scaling-up: a critical review, Appl Energy, 157, 640, 10.1016/j.apenergy.2015.01.032 Wang, 2017, System integration, durability and reliability of fuel cells: Challenges and solutions, Appl Energy, 189, 460, 10.1016/j.apenergy.2016.12.083 Wang, 2012, Discrete approach for flow field designs of parallel channel configurations in fuel cells, Int J Hydrogen Energy, 37, 10881, 10.1016/j.ijhydene.2012.04.034 Wang, 2012, Flow-field designs of bipolar plates in PEM fuel cells: theory and applications, Fuel Cells, 12, 989, 10.1002/fuce.201200074 Wang, 2018, Techno-economic challenges of fuel cell commercialization, Engineering, 4, 352, 10.1016/j.eng.2018.05.007 Wipke, 2012 Wong, 2011, A theoretical study of inlet relative humidity control in PEM fuel cell, Int J Hydrogen Energy, 36, 11871, 10.1016/j.ijhydene.2011.06.017 Wu, 2015, Dynamic behaviors of liquid droplets on a gas diffusion layer surface: hybrid lattice Boltzmann investigation, J Appl Phys, 118, 44902, 10.1063/1.4927422 Wu, 2014, Microstructure reconstruction and characterization of PEMFC electrodes, Int J Hydrogen Energy, 39, 15894, 10.1016/j.ijhydene.2014.03.074 Yablecki, 2012, Effect of liquid water presence on PEMFC GDL effective thermal conductivity, J Electrochem Soc, 159, F805, 10.1149/2.014212jes Yablecki, 2012, Modeling the effective thermal conductivity of an anisotropic gas diffusion layer in a polymer electrolyte membrane fuel cell, J Electrochem Soc, 159, B647, 10.1149/2.013206jes Yin, 2016, Non-uniform agglomerate cathode catalyst layer model on the performance of PEMFC with consideration of water effect, Renew Energy, 95, 191, 10.1016/j.renene.2016.04.015 Zamel, 2016, The catalyst layer and its dimensionality—a look into its ingredients and how to characterize their effects, J Power Sources, 309, 141, 10.1016/j.jpowsour.2016.01.091 Zawodzinski, 1991, Determination of water diffusion coefficients in perfluorosulfonate ionomeric membranes, J Phys Chem, 95, 6040, 10.1021/j100168a060 Zhang, 2016, Impact of liquid water on oxygen reaction in cathode catalyst layer of proton exchange membrane fuel cell: a simple and physically sound model, J Power Sources, 318, 251, 10.1016/j.jpowsour.2016.04.024 Zhang, 2008, A bottom-up approach to non-ideal fluids in the lattice Boltzmann method, Europhys Lett, 81, 66005, 10.1209/0295-5075/81/66005 Zhang, 2006, Liquid water removal from a polymer electrolyte fuel cell, J Electrochem Soc, 153, A225, 10.1149/1.2138675 Zhou, 2010, Liquid water transport mechanism in the gas diffusion layer, J Power Sources, 195, 1408, 10.1016/j.jpowsour.2009.09.019