Kinetics of various hydrocarbon groups formation in distillates obtained during the production of needle coke via the delayed coking of decantoil

Mochida, 1987, Evaluation of several petroleum residues as the needle coke feedstock using a tube bomb, Carbon N. Y., 25, 259, 10.1016/0008-6223(87)90124-2 Zhu, 2020, Preparation and Characterization of Coal Pitch-Based Needle Coke (Part II): The Effects of β Resin in Refined Coal Pitch, Energy Fuels, 34, 2126, 10.1021/acs.energyfuels.9b03406 Mochida, 1987, Semi-quantitative correlation between optical anisotropy and CTE of needle-like coke grains, Carbon N. Y., 25, 273, 10.1016/0008-6223(87)90126-6 Feshchenko, 2017, 48 Gorlanov, 2020, Electrolytic production of aluminium. Review. Part 1. Conventional areas of development, Tsvetnye Met, 36, 10.17580/tsm.2020.02.04 Gorlanov, 2020, Electrolytic production of aluminium. Review. Part 2. Development prospects, Tsvetnye Met, 42, 10.17580/tsm.2020.10.06 Litvinenko, 2022, Global guidelines and requirements for professional competencies of natural resource extraction engineers: Implications for ESG principles and sustainable development goals, Journal of Cleaner Production, 338, 1, 10.1016/j.jclepro.2022.130530 Litvinenko, 2020, Barriers to implementation of hydrogen initiatives in the context of global energy sustainable development, J. Min. Inst., 244, 421, 10.31897/pmi.2020.4.421 Sultanbekov, 2021, Research of the Influence of Marine Residual Fuel Composition on Sedimentation Due to Incompatibility, J. Mar. Sci. Eng., 9, 1067, 10.3390/jmse9101067 Kugatov, 2021, Investigation of the Dependence of the Softening Temperature on the Content of Mesophase in Petroleum Pitches Obtained from Heavy Pyrolysis Resin and Decant Oil, Chem. Technol. Fuels Oils., 57, 456, 10.1007/s10553-021-01265-4 Lou, 2020, Investigation on the development and orientation of mesophase microstructure during the two-stage pyrolysis of FCC decant oil, Fuel, 263, 10.1016/j.fuel.2019.116626 Zaporin, 2007, Decant-oil coking gasoils for production of industrial carbon, Chem. Technol. Fuels Oils., 43, 326, 10.1007/s10553-007-0058-y Predel, 2014, 1 Shibaev, 1993 Marsh, 1999, Semicokes from pitch pyrolysis: mechanisms and kinetics, Carbon, 37, 363, 10.1016/S0008-6223(98)00205-X Sawarkar, 2007, Petroleum Residue Upgrading Via Delayed Coking: A Review, Can. J. Chem. Eng., 85, 1, 10.1002/cjce.5450850101 Takatsuka, 1989, A practical model of thermal cracking of residual oil, J. Chem. Eng. JAPAN., 22, 304, 10.1252/jcej.22.304 Schabron, 2002, Residua coke formation predictability maps, Fuel., 81, 2227, 10.1016/S0016-2361(02)00153-9 Liu, 2020, The effect of accumulation of polycyclic aromatics in FCC decant oil on subsequent pyrolysis behaviors, Fuel., 270, 10.1016/j.fuel.2020.117529 Li, 2020, Quantitative Molecular Composition of Heavy Petroleum Fractions: A Case Study of Fluid Catalytic Cracking Decant Oil, Energy & Fuels., 34, 5307, 10.1021/acs.energyfuels.9b03425 Jiao, 2020, Effects of olefins on mesophase pitch prepared from fluidized catalytic cracking decant oil, Fuel., 262, 10.1016/j.fuel.2019.116671 Sirazitdinova, 2021, Selection of Raw Materials for High-Quality Needle Coke, Oil and Gas Technologies, 133, 16, 10.32935/1815-2600-2021-133-2-16-18 Mondal, 2021, Dissecting the cohesiveness among aromatics, saturates and structural features of aromatics towards needle coke generation in DCU from clarified oil by analytical techniques, Fuel., 304, 10.1016/j.fuel.2021.121459 Jiao, 2021, Sequential pretreatments of an FCC slurry oil sample for preparation of feedstocks for high-value solid carbon materials, Fuel., 285, 10.1016/j.fuel.2020.119169 Guo, 2020, Spinnable Mesophase Pitch Prepared via Co-carbonization of Fluid Catalytic Cracking Decant Oil and Synthetic Naphthalene Pitch, Energy & Fuels., 34, 2566, 10.1021/acs.energyfuels.9b03841 Zhang, 2021, The effect of heat pretreatment of heavy oil on the pyrolysis performance and structural evolution of needle coke, J. Anal. Appl. Pyrolysis., 157, 10.1016/j.jaap.2021.105172 Pysz, 1989, Terminology for the structural evaluation of coke via scanning electron microscopy, Carbon N. Y., 27, 935, 10.1016/0008-6223(89)90045-6 Kondrasheva, 2017, Study of Feasibility of Producing High-Quality Petroleum Coke from Heavy Yarega Oil, Chem. Technol. Fuels Oils., 52, 663, 10.1007/s10553-017-0758-x Cheremisina, 2017, Modern methods of analytical control of industrial gases, Journal of Mining Institute, 228, 726 Käfer, 2019, Detailed Chemical Characterization of Bunker Fuels by High-Resolution Time-of-Flight Mass Spectrometry Hyphenated to GC × GC and Thermal Analysis, Energy & Fuels., 33, 10745, 10.1021/acs.energyfuels.9b02626 Bai, 2018, Comparison of GC-VUV, GC-FID, and comprehensive two-dimensional GC–MS for the characterization of weathered and unweathered diesel fuels, Fuel., 214, 521, 10.1016/j.fuel.2017.11.053 Friedman, 1964, Kinetics of thermal degradation of char-forming plastics from thermogravimetry. Application to a phenolic plastic, J. Polym. Sci. Part C Polym. Symp., 6, 183, 10.1002/polc.5070060121 Aleksandrova, 2019, Assessment of Refractory Gold-bearing Ores Based on Interpretation of Thermal Analysis Data, J. Min. Inst., 235, 30, 10.31897/pmi.2019.1.30 Sultanbekov, 2021, Exploring of the incompatibility of marine residual fuel: A case study using machine learning methods, Energies, 14, 1, 10.3390/en14248422 O. Cheremisina, D. Lutsky, A. Fedorov, Comparison of extraction methods for extraction of iron, aluminum, manganese and titanium using carboxylic acids and natural vegetable oils from water-salt systems. International Multidisciplinary Scientific GeoConference: SGEM, 17(1.1) (2017), 803-809. doi:10.5593/sgem2017/11/S04.102 Anchita, 2017, HYDRO-IMP technology for heavy oil refining, J. Min. Inst., 224, 229 Boytsova, 2018, Pyrolysis Kinetics of Heavy Oil Asphaltenes under Steam Atmosphere at Different Pressures, Energy & Fuels., 32, 1132, 10.1021/acs.energyfuels.7b02716 Alvarez, 2011, Pyrolysis kinetics of atmospheric residue and its SARA fractions, Fuel., 90, 3602, 10.1016/j.fuel.2010.11.046