Joining of stainless steel 304L with Zircaloy-4 by diffusion bonding technique using Ni and Ti interlayers

1993 Sun, 1996, The application of electron beam welding for the joining of dissimilar materials: an overview, J. Mater. Process. Tech., 59, 257, 10.1016/0924-0136(95)02150-7 Joseph, 2005, Evaluation of residual stresses in dissimilar weld joints, Int. J. Pres. Ves. Pip., 82, 700, 10.1016/j.ijpvp.2005.03.006 Murty, 2013 Ahmad, 2002, Hardness and microstructural studies of electron beam, J. Nucl. Mater., 301, 118, 10.1016/S0022-3115(01)00757-7 Perona, 1966, Study of Zircaloy-2-stainless steel diffusion bonds, J. Nucl. Mater., 18, 278, 10.1016/0022-3115(66)90169-3 Shabban, 1978, Investigation of diffusion-bonding between Zircaloy-4 and 304 stainless steel, J. Nucl. Mater., 71, 277, 10.1016/0022-3115(78)90425-7 Kazakov, 1985 Hairong, 1996 Ahmad, 2002, Hardness and microstructural studies of electron beam welded joints of Zircaloy-4 and stainless steel, J. Nucl. Mater., 301, 118, 10.1016/S0022-3115(01)00757-7 Brutto, 1966, Diffusion bonding of Zircaloy-2 to steel by swaging, Nucl. Eng. Des., 3, 365, 10.1016/0029-5493(66)90123-3 Ahmad, 2005, Formation of dendritic structure in the diffusion zone of the bonded Zircaloy-4 and stainless steel 316L in the presence of Ti interlayer, J. Alloy Compd., 399, 96 Bhanumurthy, 1994, Transition joints between Zircaloy-2 and stainless steel by diffusion bonding, J. Nucl. Mater., 217, 67, 10.1016/0022-3115(94)90305-0 Bhanumurthy, 1995, Tubular transition joint between Zircaloy-2 and stainless steel, J. Mater. Process. Tech., 54, 322, 10.1016/0924-0136(94)01782-4 Aboudi, 2017, Microstructure evolution of diffusion welded 304L SS/Zircaloy4 with copper interlayer, Mater. Des., 116, 386, 10.1016/j.matdes.2016.12.008 Shaaban, 1978, Diffusion bonding of stainless steel to Zircaloy-4 in the presence of an iron intermediate layer, J. Nucl. Mater., 78, 431, 10.1016/0022-3115(78)90467-1 Akther, 2003, Diffusion bonding of stainless steel to Zircaloy-4 in the presence of a Ta intermediate layer, J. Nucl. Mater., 317, 212 Chen, 2014, Effect of Ni interlayer on partial transient liquid phase bonding of Zr–Sn–Nb alloy and 304 stainless steel, Mater. Des., 60, 358, 10.1016/j.matdes.2014.03.055 Akhter, 2009, Diffusion bonding of Ti coated Zircaloy-4 and 316-L stainless steel, Mater. Charact., 60, 193, 10.1016/j.matchar.2008.08.009 Simoes, 2016, Joining of TiAl to steel by diffusion bonding with Ni/Ti reactive multilayers, Metals, 6, 96, 10.3390/met6050096 Kundu, 2005, Diffusion bonding of commercially pure Titanium to 304 stainless steel using copper interlayer, Mater. Sci. Eng. A, 407, 154, 10.1016/j.msea.2005.07.010 Elrefaey, 2009, Solid state diffusion bonding of Titanium to steel using a copper base alloy as interlayer, J. Mater. Process. Technol., 209, 2746, 10.1016/j.jmatprotec.2008.06.014 Li, 2012, Diffusion bonding Titanium to stainless steel using Nb/Cu/Ni multi-interlayer, Mater. Charact., 68, 82, 10.1016/j.matchar.2012.03.016 Li, 2009, Fracture characteristics of vacuum diffusion bonded TA2 Titanium to 1Cr18Ni9Ti stainless steel joint with Nb+Ni interlayers, Mater. Sci. Forum, 399 Gawde, 2010, Low temperature diffusion bonding of stainless steel, Trans. Indian Inst. Metals, 63, 853, 10.1007/s12666-010-0130-x Yang, 2014, Tungsten/steel diffusion bonding using Cu/W−Ni/Ni multi-interlayer, Trans. Nonferrous Met. Soc. China, 24, 2554, 10.1016/S1003-6326(14)63382-3 Wang, 2007, Interfacial microstructure and strength of diffusion brazed joint between Al2O3-TiC and 9Cr1MoV steel, Bull. Mater. Sci., 30, 415, 10.1007/s12034-007-0067-9 Cao, 2017, Reactive air brazing of YSZ-electrolyte and Al2O3-substrate for gas sensor sealing: Interfacial microstructure and mechanical properties, Int. J. Hydrogen Energy Lin, 2017, High-strength and thermal stable Cu-to-Cu joint fabricated with transient molten Ga and Ni under-bump-metallurgy, J. Alloy. Compd., 702, 561, 10.1016/j.jallcom.2016.12.444 Singh, 2016, Optimization of the diffusion bonding parameters for SS316L/CuCrZr with and without Nickel interlayer, Fusion Eng. Des., 112, 274, 10.1016/j.fusengdes.2016.09.004 Guo, 2016, Rapid diffusion bonding of WC-Co cemented carbide to 40Cr steel with Ni interlayer: effect of surface roughness and interlayer thickness, Ceram. Int., 42, 16729, 10.1016/j.ceramint.2016.07.145 Gr, 1981, Microstructural features of hot pressure bonding between stainless steel type AISI-304 L and Zircaloy-2, J. Nucl. Mater., 99, 154, 10.1016/0022-3115(81)90184-7 Hinotani, 1988, The microstructure of diffusion-bonded Ti/Ni interface, Trans. Jpn. Inst. Metals, 29, 116, 10.2320/matertrans1960.29.116 Kundu, 2006, Interfacial microstructure and mechanical properties of diffusion-bonded Titanium–stainless steel joints using a Nickel interlayer, Mater. Sci. Eng. A, 425, 107, 10.1016/j.msea.2006.03.034 Cavaleiro, 2017, The effect of heating rate on the phase transformation of Ni/Ti multilayer thin films, Vacuum, 139, 23, 10.1016/j.vacuum.2017.02.004 Cavaleiro, 2015, Phase transformations in Ni/Ti multilayers investigated by synchrotron radiation-based X-ray diffraction, J. Alloy Compd., 646, 1165, 10.1016/j.jallcom.2015.06.037 Gupta, 1999, The Ni-Ti-Zr system, J. Phase Equilib., 20, 441, 10.1361/105497199770335604 Bhanumurthy, 1990, Solid-state diffusion reaction and formation of intermetallic compounds in the Nickel-Zirconium System, Metall. Mater. Trans. A, 2, 2897, 10.1007/BF02647210 Hammad, 1979, Interdiffusion of Zircaloy-4 and Nickel, J. Nucl. Mater., 80, 152, 10.1016/0022-3115(79)90231-9 Mazar Atabaki, 2012, Partial transient liquid phase diffusion bonding of Zirconium alloy (Zr–2.5Nb) to stainless steel 321, Mater. Des., 42, 172, 10.1016/j.matdes.2012.05.040 Bajgholi, 2012, Vacuum brazing of Zirconium based alloy and 321 Stainless steel using Ti based filler metal, J. Adv. Mater. Process., 1, 51 Waterstrat, 1992, New ternary laves phases, J. Alloy. Compd., 179, L1 Lejaeghere, 2014, Error estimates for solid-state density-functional theory predictions: an overview by means of the ground-state elemental crystals, Crit. Rev. Solid State Mater. Sci., 39, 1, 10.1080/10408436.2013.772503 Sridharan, 1983, Investigations within the quaternary system Titanium-Nickel-Aluminium-Carbon, Monatsheftefuer Chemie, 114, 127, 10.1007/BF00798317 Mayo, 1999 Thirunavukarasu, 2014, Effect of bonding time on interfacial reaction and mechanical properties of diffusion bonded joint between Ti-6Al-4V and 304 stainless steel using Nickel as an intermediate material, Metall. Mater. Trans. A, 45A, 2078, 10.1007/s11661-013-2135-7 Dheenadayalan, 2015, Effect of diffusion bonding temperature on mechanical and microstructure characteristics of CP-Titanium and high strength Aluminium dissimilar joints, Appl. Mech. Mater., 787, 495, 10.4028/www.scientific.net/AMM.787.495 Reuven, 2017, Ni interlayer to improve low pressure diffusion bonding of 316L SS pressfit tube-to-tubesheet joints for coiled tube gas heaters, ASME J. of Nuclear Rad. Sci., 10.1115/1.4035725 Yeh, 2000, Diffusion bonding of a superplastic Inconel 718SPFsuperalloy by electroless Nickel plating, J. Mater. Eng. Perform., 9, 51, 10.1361/105994900770346277 Ghosh, 2003, Diffusion bonded transition joints of Titanium to stainless steel with improved properties, Mater. Sci. Eng. A, 358, 152, 10.1016/S0921-5093(03)00298-3