Is Loading a Significantly Influential Factor in the Development of Lithic Microwear? An Experimental Test Using LSCM on Basalt from Olduvai Gorge

Ackerly, N. W. (1978). Controlling pressure in experimental lithics research. American Antiquity, 43, 480–482. Adams, J. L. (2014). Ground stone use-wear analysis: a review of terminology and experimental methods. Journal of Archaeological Science, 48, 129–138. Álvarez, M., Fuentes, N. O., Favret, E. A., Dolce, M. V., & Forlano, A. (2012). Quantifying use-wear traces through RIMAPS and variogram analyses. Archaeological and Anthropological Sciences, 4, 91–101. Anderson, P. (1980). A testimony of prehistoric tasks: diagnostic residues on stone tool working edges. World Archaeology, 12, 181–193. Anderson, P., Astruc, L., Vargiolu, R., and Zahouani, H. (1998). Contribution of quantitative analysis of surface states to a multi-method approach for characterizing plant-processing traces on flint tools with gloss. In: Antoniazzi, A., Arsuaga Ferreres, J.L., Bermudez de Castro, J.M., Carbonell I Roura, E., Cavallini, E., Fontana, F., Gutiérrez Sàez, C., di Lernia, S., Longo, L., Manzi, G., Milliken, S., Oosterbeek, L., Pavukova, V., Peresani, M., Peretto, C., Pesce Delfino, V., Pizchelauri, K., Prati, L., and Sala I Ramos, R. (eds.) Functional analysis of lithic artefacts: current state of research. Proceedings of the XIII International Congress of the International Union of Prehistoric and Protohistoric Sciences. ABACO, Forli. Pp. 1121–1132 Anderson, P. C., Georges, J.-M., Vargiolu, R., & Zahouani, H. (2006). Insights from a tribological analysis of the tribulum. Journal of Archaeological Science, 33, 1559–1568. ASME B46.1. (2009). Surface texture (surface roughness, waviness, and lay). New York: An American National Standard. American Society of Mechanical Engineers. Astruc, L., Vargiolu, R., Ben Tkaya, M., Balkan-Atlı, N., Özbaşaran, M., & Zahouani, H. (2011). Multi-scale tribological analysis of the technique of manufacture of an obsidian bracelet from Aşıklı Höyük (Aceramic Neolithic, Central Anatolia). Journal of Archaeological Science, 38, 3415–3424. Atkins, T. (2009). The science and engineering of cutting: the mechanics and processes of separating, scratching and puncturing biomaterials, metals and non-metals. Oxford: Butterworth-Heinemann. Bamforth, D. B. (1988). Investigating microwear polishes with blind tests: the institute results in context. Journal of Archaeological Science, 15, 11–23. Beyries, S. (1982). Comparaison des traces d’utilisation sur différentes roches siliceuses. In D. Cahen (Ed.), Tailler! Pour Quoi Faire: Préhistoire et Technologie Lithique II. Studia Praehistorica Belgica 2 (pp. 235–240). Tervuren: Musée royal de l’Afrique centrale. Bradley, R., & Clayton, C. (1987). The influence of flint microstructure on the formation of microwear polishes. In G. de G Sieveking & M. Newcomer (Eds.), The human uses of flint and chert: papers from the fourth international flint symposium (pp. 81–89). Cambridge: Cambridge University Press. Brown, C. A. (2013). Chapter 6: Areal fractal methods. In R. Leach (Ed.), Characterisation of areal surface texture (pp. 129–153). Berlin: Springer. Brown, D. R. S., & Brown, C. A. (2010). Investigation of surface topography differences in native and exotic invertebrates in the St. Lawrence River. Scanning, 33, 250–255. Brown, C. A., & Savary, G. (1991). Describing ground surface texture using contact profilometry and fractal analysis. Wear, 141, 211–226. Brown, C. A., Johnsen, W. A., & Butland, R. M. (1996). Scale-sensitive fractal analysis of turned surfaces. Annual CIRP, 45, 515–518. Cantor, G. C., & Brown, C. A. (2009). Scale-based correlations of relative areas with fracture of chocolate. Wear, 266, 609–612. Carbonell, E., García-Antón, M., Mallol, C., Mosquera, M., Ollé, A., Rodríguez, X. P., Sahnouni, M., Sala, R., & Vergès, J. M. (1999). The TD6 level lithic industry from Gran Dolina, Atapuerca (Burgos, Spain): production and use. Journal of Human Evolution, 37, 653–693. Chen, C., An, J., & Chen, H. (2010). Analysis of the Xiaonanhai lithic assemblage, excavated in 1978. Quaternary International, 211, 75–85. Christensen, M. (1998). Processus de formation et characterisation physico-chimique des polis d’utilisation des outils er silex. Applications à la technologie préhistorique de l’ivoire. Bulletin de la Société Préhistorique Française, 95, 183–201. Christensen, M., Walter, P., & Menu, M. (1992). Usewear characterisation of prehistoric flints with IBA. Nuclear Instruments and Methods in Physics Research B, 64, 488–493. Czichos, H. (1978). Tribology: a systems approach to the science and technology of friction, lubrication, and wear: a systems approach to the science and technology of friction, lubrication, and wear. Amsterdam: Elsevier. de la Torre, I., Benito-Calvo, A., Arroyo, A., Zupancich, A., & Proffitt, T. (2013). Experimental protocols for the study of battered stone anvils from Olduvai Gorge (Tanzania). Journal of Archaeological Science, 40, 313–332. Derndarsky, M., & Ocklind, G. (2001). Some preliminary observations on subsurface damage on experimental and archaeological quartz tools using CLSM and Dye. Journal of Archaeological Science, 28, 1149–1158. Donahue, R. E., Murphy, M. L., & Robbins, L. H. (2004). Lithic microwear analysis of middle stone age artifacts from white paintings rock shelter, Botswana. Journal of Field Archaeology, 29, 155–163. Evans, A. A. (2014). On the importance of blind testing in archaeological science: the example from lithic functional studies. Journal of Archaeological Science, 48, 5–14. Evans, A. A., & Donahue, R. E. (2005). The elemental chemistry of lithic microwear: an experiment. Journal of Archaeological Science, 32, 1733–1740. Evans, A. A., & Donahue, R. E. (2008). Laser scanning confocal microscopy: a potential technique for the study of lithic microwear. Journal of Archaeological Science, 35, 2223–2230. Evans, A. A., & Macdonald, D. A. (2011). Using metrology in early prehistoric stone tool research: further work and a brief instrument comparison. Scanning, 33, 294–303. Evans, A. A., Macdonald, D. A., Giusca, C. L., & Leach, R. K. (2014). New method development in prehistoric stone tool research: evaluating use duration and data analysis protocols. Micron, 65, 69–75. Faulks, N. R., Kimball, L. R., Hidjrati, N., & Coffey, T. S. (2011). Atomic force microscopy of microwear traces on Mousterian tools from Myshtylagty Lagat (Weasel Cave), Russia. Scanning, 33, 304–315. Fullagar, R. L. K. (1991). The role of silica in polish formation. Journal of Archaeological Science, 18, 1–24. González-Urquijo, J. E., & Ibáñez-Estévez, J. J. (2003). The quantification of use-wear polish using image analysis. First results. Journal of Archaeological Science, 30, 481–489. Grace, R. (1996). Use-wear analysis: the state of the art. Archaeometry, 38(2), 209–229. Grace, R., Graham, I. D. G., & Newcomer, M. H. (1985). The quantification of microwear polishes. World Archaeology, 17, 112–120. Hayden, B. (1979). Lithic use-wear analysis. New York: Academic. Homola, A. M., Israelachvili, J. N., McGuiggan, P. M., & Gee, M. L. (1990). Fundamental experimental studies in tribology: the transition from “interfacial” friction of undamaged molecularly smooth surfaces to “normal” friction with wear. Wear, 136, 65–83. Hurcombe, L. (1997). The contribution of obsidian use-wear analysis to understanding the formation and alteration of wear. In A. Ramos-Millan & M. A. Bustillo (Eds.), Siliceous rocks and culture (pp. 487–497). Spain: Editorial Universidad de Granada. ISO 25178–2. (2012). Geometrical product specifications (GPS)—surface texture: areal—part 2: terms, definitions and surface texture parameters. Jobson, R. W. (1986). Stone tool morphology and rabbit butchering. Lithic Technology, 15, 9–20. Jones, P. R. (1980). Experimental butchery with modern stone tools and its relevance for Palaeolithic archaeology. World Archaeology, 12, 153–165. Jordan, S. E., & Brown, C. A. (2006). Comparing texture characterization parameters on their ability to differentiate ground polyethylene ski bases. Wear, 261, 398–409. Keeley, L. H. (1980). Experimental determination of stone tool uses: a microwear analysis. Chicago: University of Chicago Press. Keeley, L. H., & Toth, N. (1981). Microwear polishes on early stone tools from Koobi Fora, Kenya. Nature, 293, 464–465. Key, A. J. M. (2013). Applied force as a determining factor in lithic use-wear accrual: an experimental investigation of its validity as a method with which to infer hominin upper limb biomechanics. Lithic Technology, 38(1), 32–45. Key, A. J. M., & Lycett, S. J. (2011). Technology based evolution? A biometric test of the effects of handsize versus tool form in an experimental cutting task. Journal of Archaeological Science, 38, 1663–1670. Key, A. J. M., & Lycett, S. J. (2014a). Are bigger flakes always better? An experimental assessment of flake size variation on cutting efficiency and loading. Journal of Archaeological Science, 41, 140–146. Key, A. J. M., & Lycett, S. J. (2014b). Edge angle as a variably influential factor in flake cutting efficiency: an experimental investigation of its relationship with tool size and loading. Archaeometry. doi:10.1111/arcm.12140. Kimball, L. R., Kimball, J. F., & Allem, P. E. (1995). Microwear polishes as viewed through the atomic force microscope. Lithic Technology, 20, 6–28. Kimball, L., Allen, P., Kimball, J., Schlichting, B., and Phan, K. (1998). The analysis of microwear polishes with the atomic force microscope. In: Antoniazzi, A., Arsuaga Ferreres, J.L., Bermudez de Castro, J.M., Carbonell I Roura, E., Cavallini, E., Fontana, F., Gutiérrez Sàez, C., di Lernia, S., Longo, L., Manzi, G., Milliken, S., Oosterbeek, L., Pavukova, V., Peresani, M., Peretto, C., Pesce Delfino, V., Pizchelauri, K., Prati, L., and Sala I Ramos, R. (eds.) Functional analysis of lithic artefacts: current state of research. Proceedings of the XIII International Congress of the International Union of Prehistoric and Protohistoric Sciences. ABACO, Forli. Pp. 11121–1132 Leakey, M. D. (1971). Olduvai Gorge. Vol 3. Excavations in beds I and II, 1960–1963. Cambridge: Cambridge University Press. Lemorini, C., Stiner, M. C., Gopher, A., Shimelmitz, R., & Barkai, R. (2006). Use-wear analysis of an Amudian laminar assemblage from the Acheuleo-Yabrudian of Qesem Cave, Israel. Journal of Archaeological Science, 33, 921–934. Lerner, H. J. (2014). Intra-raw material variability and use-wear formation: an experimental examination of a Fossiliferous chert (SJF) and Silicified Wood (YSW) from NW New Mexico using clemex vision processing frame. Journal of Archaeological Science, 48, 34–45. Lerner, H., Du, X., Costopoulos, A., & Ostoja-Starzewski, M. (2007). Lithic raw material physical properties and use-wear accrual. Journal of Archaeological Science, 34, 711–722. Lerner, H. J., Dytchkowskyj, D., and Nielsen, C. (2010). Raw material variability, use-wear accrual rates and addressing the ambiguity of some use-wear traces: an example from northwestern New Mexico. Rivista di Scienze Preistoriche, 313–333. Lewenstein, S. (1987). Stone tool use at Cerros: the ethnoarchaeological use-wear analysis. Austin: University of Texas Press. Lipson, C., & Seth, N. J. (1973). Statistical design and analysis of engineering experiments. New York: McGraw-Hill. Macdonald, D. A. (2014). The application of focus variation microscopy for lithic use-wear quantification. Journal of Archaeological Science, 48, 26–33. Masson, A., Coqueugniot, E., & Roy, S. (1981). Silice et traces d’usage: le lustre des faucilles. Nouvelles Archives Museum d’Histoire Naturelle de Lyon, 19, 43–51. Mecholsky, J. J., & Mackin, T. J. (1988). Fractal analysis of fracture in Ocala chert. Journal of Material Science Letters, 7, 1145–1147. Meeks, N. D., de G Sieveking, G., Tite, M. S., & Cook, J. (1982). Gloss and use-wear traces on flint sickles and similar phenomena. Journal of Archaeological Science, 9, 317–340. Miller, G. L. (2013). Illuminating activities at Paleo Crossing (33ME274) through microwear analysis. Lithic Technology, 38, 97–108. Moller, G. F., & Swisher, C. C., III. (2012). The Ngorongoro Volcanic Highland and its relationships to volcanic deposits at Olduvai Gorge and East African Rift volcanism. Journal of Human Evolution, 63, 274–283. Myshkin, N. K., Petrokovets, M. I., & Kovalev, A. V. (2005). Tribology of polymers: adhesion, friction, wear, and mass-transfer. Tribology International, 38, 910–921. Newcomer, M., Grace, R., & Unger-Hamilton, R. (1986). Investigating microwear polishes with blind tests. Journal of Archaeological Science, 13, 203–217. Odell, G. H. (2001). Stone tool research at the end of the millennium: classification, function, and behaviour. Journal of Archaeological Research, 9, 45–100. Ollé, A., & Vergès, J. M. (2008). SEM functional analysis and the mechanism of microwear formation. Prehistoric Technology, 40, 39–49. Ollé, A., & Vergès, J. M. (2014). The use of sequential experiments and SEM in documenting stone tool microwear. Journal of Archaeological Science, 48, 60–72. Rees, D., Wilkinson, G. G., Grace, R., & Orton, C. R. (1991). An investigation into the fractal properties of flint microwear images. Journal of Archaeological Science, 18, 629–640. Rots, V. (2013). Insights into early Middle Palaeolithic tool use and hafting in Western Europe. The functional analysis of level 11a of the early Middle Palaeolithic site of Biache-Saint-Vaast (France). Journal of Archaeological Science, 40, 497–506. Sano, K. (2012). Functional variability in the Magdalenian of north-western Europe: a lithic microwear analysis of the Gönnersdorf K-11 assemblage. Quaternary International, 272–273, 264–274. Scott, R. S., Ungar, P. S., Bergstrom, T. S., Brown, C. A., Grine, F. E., Teaford, M. F., & Walker, A. (2005). Dental microwear texture analysis shows within-species diet variability in fossil hominins. Nature, 436, 693–695. Seeman, M. F., Loebel, T. J., Comstock, A., & Summers, G. L. (2013). Working with Wilmsen: Paleoindian End Scraper design and use at Nobles Pond. American Antiquity, 78, 407–432. Semenov, S. (1950). O protivostavenii bol’shogo pal’tsa ruki Neanderthal’skogo cheloveka. Sovetskaya Etnografya, 11, 70–82. Semenov, S. (1964). Prehistoric technology. London: Cory, Adams and Mackay. Shea, J. J. (1992). Lithic microwear analysis in archaeology. Evolutionary Anthropology, 1, 143–150. Sheppard, C. J. R., & Shotton, D. M. (1997). Confocal laser scanning microscopy. Oxford: BIOS. Smallwood, A.M. (2013). Building experimental use-wear analogues for Clovis biface functions. Archaeological and Anthropological Sciences, 1–14. Šmit, Z., Petru, S., Grime, G., Vidmar, T., Budnar, M., Zorko, B., & Ravnikar, M. (1998). Usewear-induced deposition on prehistoric flint tools. Nuclear Instruments and Methods in Physics Research B, 140, 209–216. Šmit, Z., Grime, G. W., Petru, S., & Rajta, I. (1999). Microdistribution and composition of usewear polish on prehistoric stone tools. Nuclear Instruments and Methods in Physics Research B, 150, 565–570. Stemp, W. J. (2014). A review of quantification of lithic use-wear using laser profilometry: a method based on metrology and fractal analysis. Journal of Archaeological Science, 48, 15–25. Stemp, W. J., & Chung, S. (2011). Discrimination of surface wear on obsidian tools using LSCM and RelA: pilot study results (area-scale analysis of obsidian tool surfaces). Scanning, 33, 279–293. Stemp, W. J., & Stemp, M. (2001). UBM laser profilometry and lithic use-wear analysis: a variable length scale investigation of surface topography. Journal of Archaeological Science, 28, 81–88. Stemp, W. J., & Stemp, M. (2003). Documenting stages of polish development on experimental stone tools: surface characterization by fractal geometry using UBM laser profilometry. Journal of Archaeological Science, 30(3), 287–296. Stemp, W. J., Childs, B. E., Vionnet, S., & Brown, C. A. (2008). The quantification of microwear on chipped stone tools: assessing the effectiveness of root mean square roughness (Rq). Lithic Technology, 33, 173–189. Stemp, W. J., Childs, B. E., Vionnet, S., & Brown, C. A. (2009). Quantification and discrimination of lithic use-wear: surface profile measurements and length-scale fractal analysis. Archaeometry, 51, 366–382. Stemp, W. J., Childs, B. E., & Vionnet, S. (2010). Laser profilometry and length-scale analysis of stone tools: second series experiment results. Scanning, 32, 233–243. Stemp, W.J., Evans, A.A. and Lerner, H.J. (2012). Reaping the rewards: the potential of well designed methodology, a comment on Vardi et al. (Journal of Archeological Science 37 (2010) 1716–1724) and Goodale et al. (Journal of Archeological Science 37 (2010) 1192–1201). Journal of Archeological Science, 39, 1901–1904 Stemp, W. J., Lerner, H. J., & Kristant, E. H. (2013). Quantifying microwear on experimental Mistassini quartzite scrapers: preliminary results of exploratory research using LSCM and scale-sensitive fractal analysis. Scanning, 35, 28–39. Stemp, W. J., Andruskiewicz, M. D., Gleason, M. A., & Rashid, Y. H. (2014). Experiments in ancient maya blood-letting: quantification of surface wear on obsidian blades. Archaeological and Anthropological Sciences. doi:10.1007/s12520-014-0204-5. Stevens, N. E., Harro, D. R., & Hicklin, A. (2010). Practical quantitative lithic use-wear analysis using multiple classifiers. Journal of Archaeological Science, 37, 2671–2678. Tringham, R., Cooper, G., Odell, G. H., Voytek, B., & Whitman, A. (1974). Experimentation in the formation of edge-damage: a new approach to lithic analysis. Journal of Field Archaeology, 1, 171–196. Unger, P. S., Brown, C. A., Bergstrom, T. S., & Walker, A. (2003). Quantification of dental microwear by tandem scanning confocal microscopy and scale-sensitive fractal analyses. Scanning, 25, 185–193. Unger-Hamilton, R. (1984). The formation of use-wear polish on flint: beyond the “deposit versus abrasion” controversy. Journal of Archaeological Science, 11, 91–98. Vaughan, P. (1985). Use wear analysis of flaked stone tools. Arizona: University of Arizona Press. Yamada, S. (1993). The formation process of “use-wear polishes”. In P. Amderson, S. Beyries, M. Otte, & H. Plisson (Eds.), Traces et Function: Les Gestes Retrouvés (pp. 447–457). Liege: Eraul. Zang, B., Liu, X., Brown, C. A., & Bergstrom, T. S. (2002). Micro-grinding of nanostructured material coatings. Annual CIRP, 51, 251–254.