Investigations on performance and failure mechanisms of high temperature thermoplastic polymers as adhesives

Forte, 2000, The influence of adhesive reinforcement on the Mode-I fracture toughness of a bonded joint, Compos Sci Technol, 60, 2389, 10.1016/S0266-3538(00)00034-8 Chian, 2005, Nano-reinforcement of Epoxy Adhesives with POSS, NSTI-Nanotech, 2, 107 Ratta, 1999, A melt-processable semicrystalline polyimide structural adhesive based on 1,3-bis(4-aminophenoxy) benzene and 3,3′,4,4′-biphenyltetracarboxylic dianhydride, Polym (Guildf), 40, 1889, 10.1016/S0032-3861(98)00399-1 Fowler, 1982, High temperature adhesives for structural applications – a review, Mater Des, 3, 602, 10.1016/0261-3069(82)90002-4 Petrie, 2000 Rabilloud, 2011 Ramani, 1996, Process-Induced effects in thin-film bonding of PEKEKK in metal-polymer joints, Polym Compos, 17, 879, 10.1002/pc.10681 Ramani, 1998, The evolution of residual stresses in thermoplastic bonding to metals, Int J Adhes Adhes, 17, 353, 10.1016/S0143-7496(97)00030-4 Saeed, 2007, Adhesive strength of nano-size particles filled thermoplastic polyimides. Part-II: aluminum nitride (AlN) nano-powder–polyimide composite films, Int J Adhes Adhes, 27, 319, 10.1016/j.ijadhadh.2006.06.002 Saeed, 2007, Adhesive strength of nano-size particles filled thermoplastic polyimides. Part-I: multi-walled carbon nano-tubes (MWNT)–polyimide composite films, Int J Adhes Adhes, 27, 306, 10.1016/j.ijadhadh.2006.06.001 Saldanha, 2013, Mechanical characterization of a high elongation and high toughness epoxy adhesive, Int J Adhes Adhes, 47, 91, 10.1016/j.ijadhadh.2013.08.001 Naito, 2012, The effect of adhesive thickness on tensile and shear strength of polyimide adhesive, Int J Adhes Adhes, 36, 77, 10.1016/j.ijadhadh.2012.03.007 Datla, 2011, The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint, Eng Fract Mech, 78, 1125, 10.1016/j.engfracmech.2011.01.028 Sugama, 1993, Polyphenyletherketone and polyphenylethersulfone adhesives for metal-to-metal joints, Int J Adhes Adhes, 13, 257, 10.1016/0143-7496(93)90029-9 Sugama, 1992, Adhesion of crystalline polyphenyletheretherketone (PEEK) in metal-to-metal joints, Int J Adhes Adhes, 12, 27, 10.1016/0143-7496(92)90005-G Sugama, 1991, Interfaces of polyphenylene sulphide-to-metal joints, Int J Adhes Adhes, 11, 97, 10.1016/0143-7496(91)90033-E Ramani, 1995, Thin-film thermoplastic-metal joining process for titanium to poly(etherketoneetherketoneketone), Polym Eng Sci, 35, 1972, 10.1002/pen.760352409 Ingram, 1997, The effect of sodium hydroxide anodization on the durability of poly(etherketonetherketoneke- tone) adhesive bonding of titanium, Int J Adhes Adhes, 17, 39, 10.1016/S0143-7496(96)00027-9 Shimizu, 2014, Durability of PEEK adhesive to stainless steel modified with aryldiazonium salts, Int J Adhes Adhes, 51, 1, 10.1016/j.ijadhadh.2014.02.002 Talyzin, 2006, Temperature dependence of C60 Raman spectra up to 840 K, Solid State Commun, 140, 178, 10.1016/j.ssc.2006.07.043 Brookes, 1997, The FT-Raman spectroscopic study of polymers at temperatures in excess of 200°C, Spectrochim Acta Part A Mol Biomol Spectrosc, 53, 2313, 10.1016/S1386-1425(97)00171-6 Liem, 2004, Glass transition temperatures of polymer thin films monitored by Raman scattering, J Phys Condens Matter, 16, 721, 10.1088/0953-8984/16/6/003 Briscoe, 1993, A Fourier transform Raman spectroscopy study of the crystallization behaviour of poly (ether ether ketone)/poly(ether imide) blends, Spectrochim Acta Part A Mol Biomol Spectrosc, 49, 753, 10.1016/0584-8539(93)80099-V Briscoe, 1991, A comparison of thermal- and solvent-induced relaxation of poly(ether ether ketone) using Fourier transform Raman spectroscopy, Spectrochim Acta Part A Mol Spectrosc, 47, 1299, 10.1016/0584-8539(91)80219-9 Kong, 2008, Molecular and crystal deformation in Poly(aryl ether ether ketone) fibers, Macromolecules, 41, 7519, 10.1021/ma801402w Eichhorn, 2001, Deformation mechanisms in cellulose fibres, paper and wood, J Mater Sci, 36, 3129, 10.1023/A:1017969916020 Yeh, 1999, Molecular deformation processes in aromatic high modulus polymer fibres, Polym (Guildf), 40, 857, 10.1016/S0032-3861(98)00308-5 Kim, 2001, Synthesis and properties of vinyl-terminated and silicon- containing polysulfones and polyketones, J Polym Sci Part A Polym Chem, 39, 2937, 10.1002/pola.1274 Rao, 1999, Polyether sulfones, J Macromol Sci Part C Polym Rev, 39, 655, 10.1081/MC-100101430 Brydson, 1999 Tregub, 1995, Deformation and thermoelastic behavior of poly(aryl ether ketones), Macromolecules, 28, 3890, 10.1021/ma00115a019 Richeton, 2006, Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: characterization and modeling of the compressive yield stress, Int J Solids Struct, 43, 2318, 10.1016/j.ijsolstr.2005.06.040 Adams, 1992, The effect of temperature on the strength of adhesive joints, Int J Adhes Adhes, 12, 185, 10.1016/0143-7496(92)90052-W Stuart, 1997, A Fourier transform Raman spectroscopy study of the crystallisation behaviour of a poly(ether ether ketone)/poly(ether sulphone) blend, Spectrochim Acta Part A Mol Biomol Spectrosc, 53, 107, 10.1016/S1386-1425(97)83014-4 Zhang, 1993, Effects of thermal treatment on poly(ether ether ketone), Polym (Guildf), 34, 3648, 10.1016/0032-3861(93)90049-G Blundell, 1992, The crystal lamellar morphology of an aromatic polyketone with unusual crystallization and melting behaviour, Polym (Guildf), 33, 2475, 10.1016/0032-3861(92)91127-N