Investigation on the evolution characteristics of bed porous structure during iron ore sintering

Boigné, 2021, Simultaneous in-situ measurements of gas temperature and pyrolysis of biomass smoldering via X-ray computed tomography, Proceedings of the Combustion Institute, 38, 3899, 10.1016/j.proci.2020.06.070 Braaten, 2020, Studying Pt-based fuel cell electrode degradation with nanoscale X-ray computed tomography, Journal of Power Sources, 478, 10.1016/j.jpowsour.2020.229049 Chirol, 2021, Pore, live root and necromass quantification in complex heterogeneous wetland soils using X-ray computed tomography, Geoderma, 387, 10.1016/j.geoderma.2020.114898 Choudhary, 2007, Evolution of sinter structure along bed height of quenched test pot, ISIJ International, 47, 516, 10.2355/isijinternational.47.516 Debrincat, 2004, Effect of iron ore particle assimilation on Sinter structure, ISIJ International, 44, 1308, 10.2355/isijinternational.44.1308 Dunnmon, 2017, An investigation of internal flame structure in porous media combustion via X-ray Computed Tomography, Proceedings of the Combustion Institute, 36, 4399, 10.1016/j.proci.2016.06.188 Gu, 2021, Three-dimensional visualization and quantification of microporosity in aluminum castings by X-ray micro-computed tomography, Journal of Materials Science & Technology, 65, 99, 10.1016/j.jmst.2020.03.088 Guo, 2021, Analysis of foamed concrete pore structure of railway roadbed based on X-ray computed tomography, Construction and Building Materials, 273, 10.1016/j.conbuildmat.2020.121773 Hack, 2020, Use of X-ray computed tomography for understanding localised, along-the-channel degradation of polymer electrolyte fuel cells, Electrochimica Acta, 352, 10.1016/j.electacta.2020.136464 Hao, 2021, Tracking lithium penetration in solid electrolytes in 3D by in-situ synchrotron X-ray computed tomography, Nano Energy, 82, 10.1016/j.nanoen.2021.105744 He, 2021, 3D characterization of the SiC nanoparticle distribution in ZrB2–SiC ceramics with synchrotron X-ray nanoscale computed tomography, Ceramics International, 47, 12780, 10.1016/j.ceramint.2021.01.138 Hosotani, 1996, Reduction properties of sinter with fine dispersed pores at high temperatures of 1273K and above, ISIJ International, 36, 1439, 10.2355/isijinternational.36.1439 Kasai, 1989, An analysis of the structure of iron-ore sinter cake, ISIJ International, 29, 635, 10.2355/isijinternational.29.635 Kasama, 1994, New analysis method of sinter cake pore structure for permeability evaluation, ISIJ International, 34, 562, 10.2355/isijinternational.34.562 Kodama, 2020, High-pressure in situ X-ray computed tomography and numerical simulation of sulfide solid electrolyte, Journal of Power Sources, 462, 10.1016/j.jpowsour.2020.228160 Liu, 2021, Investigation on micro-structure of self-compacting concrete modified by recycled grinded tire rubber based on X-ray computed tomography technology, Journal of Cleaner Production, 290, 10.1016/j.jclepro.2021.125838 Liu, 2018, Iron ore sinter structure development under realistic thermal conditions, Chemical Engineering Research and Design, 130, 129, 10.1016/j.cherd.2017.09.025 Loo, 2012, Structural transformation of beds during iron ore sintering, ISIJ International, 52, 2158, 10.2355/isijinternational.52.2158 Loo, 2003, Factors influencing the bonding phase structure of iron ore sinters, ISIJ International, 43, 1393, 10.2355/isijinternational.43.1393 Nakano, 1997, Analysis of three dimensional structure of iron-ore sintercake, ISIJ International, 37, 339, 10.2355/isijinternational.37.339 Nushiro, 1999, Analysis of Pore Combination in Sintering by hot stage X-ray computerized tomograohic scanner, ISIJ International, 39, 1239, 10.2355/isijinternational.39.1239 Nushiro, 1997, Analysis of flow behavior of fluid during sintering process with large amounts of pisolitic ore by hot stage X-ray CT scanner, Tetsu To Hagane-Journal of the Iron and Steel Institute of Japan, 83, 1 Pegoraro, 2020, Spheroidal graphite coalescence during thermal cycling in the ferritic domain of a high-silicon cast iron studied by optical microscopy and X-ray computed tomography, Materials Today Communications, 25, 10.1016/j.mtcomm.2020.101422 Pena Fernandez, 2020, Low-cycle full-field residual strains in cortical bone and their influence on tissue fracture evaluated via in situ stepwise and continuous X-ray computed tomography, Journal of Biomechanics, 113, 10.1016/j.jbiomech.2020.110105 Shatokha, 2013, Application of 3D X-ray tomography to investigation of structure of sinter mixture granules, Ironmaking and Steelmaking, 36, 416, 10.1179/174328109X443347 Shatokha, 2013, Iron ore sinter porosity characterisation with application of 3D X-ray tomography, Ironmaking and Steelmaking, 37, 313, 10.1179/030192310X12683045805865 Skarżyński, 2021, Shear fracture of longitudinally reinforced concrete beams under bending using Digital Image Correlation and FE simulations with concrete micro-structure based on X-ray micro-computed tomography images, Construction and Building Materials, 274, 10.1016/j.conbuildmat.2020.122116 Tonin, 2020, Operando investigation of the lithium/sulfur battery system by coupled X-ray absorption tomography and X-ray diffraction computed tomography, Journal of Power Sources, 468, 10.1016/j.jpowsour.2020.228287 Wang, 2020, Study of stand-support sintering to achieve high oxygen potential in iron ore sintering to enhance productivity and reduce CO content in exhaust gas, Journal of Cleaner Production, 252, 10.1016/j.jclepro.2019.119855 Wu, 2021, Multi-length scale characterization of compression on metal foam flow-field based fuel cells using X-ray computed tomography and neutron radiography, Energy Conversion and Management, 230, 10.1016/j.enconman.2020.113785 Xu, 2020, In situ visualization by X-Ray computed tomography on sulfur stabilization and lithium polysulfides immobilization in S@HCS/MnO cathode, Energy Storage Materials, 31, 164, 10.1016/j.ensm.2020.06.011 Zhao, 2015, Modelling fuel combustion in iron ore sintering, Combustion and Flame, 162, 1019, 10.1016/j.combustflame.2014.09.026 Zhou, 2015, Effect of flame-front speed on the pisolite-ore sintering process, Applied Thermal Engineering, 75, 307, 10.1016/j.applthermaleng.2014.09.050 Zhou, 2015, Influence of coke combustion on NOx emission during iron ore sintering, Energy & Fuels, 29, 974, 10.1021/ef502524y Zhou, 2017, Experimental study and X-ray microtomography based CFD simulation for the characterization of pressure drop in sinter bed, Applied Thermal Engineering, 112, 811, 10.1016/j.applthermaleng.2016.10.123 Zhou, 2017, High resolution X-ray microtomography for the characterization of pore structure and effective thermal conductivity of iron ore sinter, Applied Thermal Engineering, 127, 508, 10.1016/j.applthermaleng.2017.08.051 Zhou, 2019, Experimental investigation on the flame front resistance of gas channel growth with melt formation in iron ore sinter beds, Proceedings of the Combustion Institute, 37, 4607, 10.1016/j.proci.2018.09.027 Zhou, 2019, Effect of coke rate and basicity on computed tomography-measured pore parameters and effective thermal conductivity of iron ore sinter, Journal of Materials Research and Technology, 8, 6191, 10.1016/j.jmrt.2019.10.013 Zhou, 2016, Influence of binder dosage on granule structure and packed bed properties in iron ore sintering process, ISIJ International, 56, 1920, 10.2355/isijinternational.ISIJINT-2016-298