Investigation on mechanical, tribological and microstructural properties of Al–Mg–Si–T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications
Tóm tắt
Từ khóa
Tài liệu tham khảo
Macke, 2012, Metal matrix composites offer the automotive industry an opportunity to reduce vehicle weight, improve performance, Adv Mater Process, 170, 19
Narale, 2018, Experimental investigation and optimization of multiple performance characteristics of Al-Mica-B4C hybrid reinforced composite in drilling operation, Mater Today Proc, 5, 19763, 10.1016/j.matpr.2018.06.339
Deonath, 1981, Cast aluminium alloy composites containing copper-coated ground mica particles, J Mater Sci, 16, 1599, 10.1007/BF02396877
Pargunde, 2013, Fabrication of metal matrix composite by stir casting method, Int J Adv Eng Res Stud II, 49
Barekar, 2009, Processing of aluminum-graphite particulate metal matrix composites by advanced shear technology, J Mater Eng Perform, 18, 1230, 10.1007/s11665-009-9362-5
Na Guan, 2011, Effects of stirring parameters on microstructure and tensile properties of (ABOw+SiCp)/6061Al composites fabricated by semi-solid stirring technique, Trans Nonferrous Metals Soc China, 21, s274, 10.1016/S1003-6326(11)61590-2
Songmene, 1999, Machinability of graphitic metal matrix composites as a function of reinforcing particles, CIRP Ann, 48, 77, 10.1016/S0007-8506(07)63135-7
Lokesh, 2014, Evaluation of Al-4.5%Cu alloy reinforced fly ash and SiC by stir and squeeze casting with rolled composites, Int J Mech Eng Robot, 2, 6
Carvalho, 2015, Dry sliding wear behaviour of AlSi-CNTs-SiCp hybrid composites, Tribol Int, 90, 148, 10.1016/j.triboint.2015.04.031
Alidokht, 2011, Microstructure and tribological performance of an aluminium alloy-based hybrid composite produced by friction stir processing, Mater Des, 32, 2727, 10.1016/j.matdes.2011.01.021
Krishnamurthy, 2012, Characterization and solid particle erosion behavior of plasma sprayed alumina and calcia-stabilized zirconia coatings on Al-6061 substrate, Wear, 274–275, 15, 10.1016/j.wear.2011.08.003
Shin, 2010, Effect of temper, specimen orientation and test temperature on the tensile and fatigue properties of SiC particles reinforced PM 6061 Al alloy, Int J, 32, 1573
Aruri, 2013, Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing, J Mater Res Technol, 2, 362, 10.1016/j.jmrt.2013.10.004
Gopalakrishnan, 2012, Production and wear characterization of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method, Compos B Eng, 43, 302, 10.1016/j.compositesb.2011.08.049
Mittal, 2018, Wear behaviour of aluminium7075 based composites reinforced with SiC, Red mud and Al2O3, Int J Res Appl Sci Eng Technol, 6, 2802, 10.22214/ijraset.2018.4469
Özdemir, 2000, The effect of forging on the properties of particulate-SiC-reinforced aluminium-alloy composites, Compos Sci Technol, 60, 411, 10.1016/S0266-3538(99)00140-2
Singh, 2009, Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites, J Mater Process Technol, 209, 2104, 10.1016/j.jmatprotec.2008.05.002
Akbari, 2013, Nano-sized aluminum oxide reinforced commercial casting A356 alloy matrix: evaluation of hardness, wear resistance and compressive strength focusing on particle distribution in aluminum matrix, Compos B Eng, 52, 262, 10.1016/j.compositesb.2013.04.038
Zhang, 2003, The thermal expansion and mechanical properties of high reinforcement content SiCp/Al composites fabricated by squeeze casting technology, Compos A Appl Sci Manuf, 34, 1023, 10.1016/S1359-835X(03)00253-7
Kumar, 2012, Studies on mechanical and dry sliding wear of Al6061–SiC composites, Compos B Eng, 43, 1185, 10.1016/j.compositesb.2011.08.046
Yue, 2017, Effect of interfacial modifying on the microstructures, mechanical properties and abrasive wear properties of aluminum borate whiskers reinforced 6061Al composite, J Alloy Compd, 692, 395, 10.1016/j.jallcom.2016.09.082
Ma, 2018, Mechanical and wear performances of aluminum/sintered carbon composites produced by pressure infiltration for pantograph sliders, Powder Technol, 326, 54, 10.1016/j.powtec.2017.12.027
Suryakumari, 2018, Preparation and study the wear behaviour of aluminium hybrid composite, Mater Today Proc, 5, 8104, 10.1016/j.matpr.2017.11.497
Cao, 2018, Fabrication of in situ carbon fiber/aluminum composites via friction stir processing: evaluation of microstructural, mechanical and tribological behaviors, Compos B Eng, 139, 97, 10.1016/j.compositesb.2017.12.001
Gireesh, 2018, Mechanical characterization of aluminium metal matrix composite reinforced with aloe vera powder, Mater Today Proc, 5, 3289, 10.1016/j.matpr.2017.11.571
Basavarajappa, 2007, Influence of sliding speed on the dry sliding wear behaviour and the sub surface deformation on hybrid metal matrix composite, Wear, 262, 1007, 10.1016/j.wear.2006.10.016
Alidokht, 2013, Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite, Wear, 305, 291, 10.1016/j.wear.2012.11.043
Corrochano, 2011, Dry sliding wear behaviour of powder metallurgy Al–Mg–Si alloy-MoSi2 composites and the relationship with the microstructure, Wear, 270, 658, 10.1016/j.wear.2011.01.029
Benal, 2007, Effects of reinforcements content and ageing durations on wear characteristics of Al (6061) based hybrid composites, Wear, 262, 759, 10.1016/j.wear.2006.08.022
Baradeswaran, 2013, Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites, Compos B Eng, 54, 146, 10.1016/j.compositesb.2013.05.012
Hamid, 2006, Influence of particle content and porosity on the wear behaviour of cast in situ Al(Mn)–Al2O3(MnO2) composite, Wear, 260, 368, 10.1016/j.wear.2005.02.120
Jha, 2011, Sliding wear behaviour of aluminum syntactic foam: a comparison with Al–10wt% SiC composites, Tribol Int, 44, 220, 10.1016/j.triboint.2010.10.004
Baradeswaran, 2014, Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites, Compos B Eng, 56, 464, 10.1016/j.compositesb.2013.08.013
Sharma, 2017, Effect of flyash particles with aluminium melt on the wear of aluminium metal matrix composites, Eng Sci Technol Int J, 20, 1318
Pramanik, 2016, Effects of reinforcement on wear resistance of aluminum matrix composites, Trans Nonferrous Metals Soc China, 26, 64125, 10.1016/S1003-6326(16)64125-0
Zhu, 2017, Fabrication of an A356/fly-ash-mullite interpenetrating composite and its wear properties, Ceram Int, 43, 12996, 10.1016/j.ceramint.2017.07.020
Phanibhushana, 2017, Study of wear characteristics of hematite reinforced aluminum metal matrix composites, Mater Today Proc, 4, 3484, 10.1016/j.matpr.2017.02.238
Eskandari, 2019, Preparation of a new magnetic and photo-catalyst CoFe2O4–SrTiO3 perovskite nanocomposite for photo-degradation of toxic dyes under short time visible irradiation, Compos B Eng, 176, 107343, 10.1016/j.compositesb.2019.107343
Etminan, 2018, Preparation of tin ferrite–tin oxide by hydrothermal, precipitation and auto-combustion: photo-catalyst and magnetic nanocomposites for degradation of toxic azo-dyes, J Mater Sci Mater Electron, 29, 1766, 10.1007/s10854-017-8085-x
Joulaei, 2019, Investigation of magnetic, mechanical and flame retardant properties of polymeric nanocomposites: green synthesis of MgFe2O4 by lime and orange extracts, Compos B Eng, 176, 107345, 10.1016/j.compositesb.2019.107345
Kiani, 2019, A novel magnetic MgFe2O4–MgTiO3 perovskite nanocomposite: rapid photo-degradation of toxic dyes under visible irradiation, Compos B Eng, 175, 107080, 10.1016/j.compositesb.2019.107080
Moradi, 2018, Rapid photo-degradation of toxic dye pollutants: green synthesis of mono-disperse Fe3O4–CeO2 nanocomposites in the presence of lemon extract, J Mater Sci Mater Electron, 29, 11065, 10.1007/s10854-018-9189-7
Naghikhani, 2018, Simple and green synthesis of CuFe2O4–CuO nanocomposite using some natural extracts: photo-degradation and magnetic study of nanoparticles, J Mater Sci Mater Electron, 29, 4689, 10.1007/s10854-017-8421-1
Korkmaz, 2020, FEM modelling of turning of AA6061-T6: investigation of chip morphology, chip thickness and shear angle, J Prod Syst Manuf Sci, 2, 50
Sahin, 2003, Preparation and some properties of SiC particle reinforced aluminium alloy composites, Mater Des, 24, 671, 10.1016/S0261-3069(03)00156-0
Chandla, 2020, Experimental analysis and mechanical characterization of Al 6061/alumina/bagasse ash hybrid reinforced metal matrix composite using vacuum-assisted stir casting method, J Compos Mater, 54, 4283, 10.1177/0021998320929417
Kumar, 2010, Studies on Al6061-SiC and Al7075-Al2O3 metal matrix composites, J Miner Mater Char Eng, 9, 43