Investigation of the degradation and stability of acrylamide-based polymers in acid solution: Functional monomer modified polyacrylamide

Johansen, 1979 Rabiee, 2015, A survey on cationic polyelectrolytes and their applications: acrylamide derivatives, Rev. Chem. Eng., 31, 239, 10.1515/revce-2014-0056 Unsal, 1978, Comparison of solution properties of mobility control polymers, Am. Chem. Soc. Div. Pet. Chem. Prepr. (United States), 23 Taylor, 1993, Spectrophotometric determination of acrylamide polymers by flow injection analysis, SPE Adv. Technol. Ser., 1, 130, 10.2118/21007-PA Taylor, 1998, Development of a flow injection analysis method for the determination of acrylamide copolymers in brines, J. Pet. Sci. Eng., 21, 129, 10.1016/S0920-4105(98)00042-4 Gaillard, 2010, Improved oil recovery using thermally and chemically protected compositions based on co-and ter-polymers containing acrylamide Kot, 2012, Novel drag-reducing agents for fracturing treatments based on polyacrylamide containing weak labile links in the polymer backbone, SPE J., 17, 924, 10.2118/141257-PA Thomas, 2013, Novel associative acrylamide-based polymers for proppant transport in hydraulic fracturing fluids Bai, 2015, A comprehensive review of polyacrylamide polymer gels for conformance control, Pet. Explor. Dev., 42, 525, 10.1016/S1876-3804(15)30045-8 Swiecinski, 2016, The thermal stability of polyacrylamides in EOR applications Guo, 2015, Flow behavior through porous media and microdisplacement performances of hydrophobically modified partially hydrolyzed polyacrylamide, SPE J. Muecke, 1982, Principles of acid stimulation McLeod, 1984, Matrix acidizing, J. Petroleum Technol., 36, 2 Hill, 1994, Fluid placement and diversion in matrix acidizing Kalfayan, 2009, The Art and practice of acid placement and diversion: history, present state, and future Zhang, 2008, Thickened mud acid DXGY-1 for blockage removal in heterogeneous sandstone reservoirs, Oilfield Chem., 3, 003 LIU, 2013, Synthesis and performance evaluation of acid thickening agent BC-13, Appl. Chem. Ind., 11, 029 Kriegel, 2013 Ogle, 2014 Al-Taq, 2007, Effective acid diversion and water control in carbonate reservoirs using an associative polymer treatment: case histories from Saudi Arabia Al-Taq, 2007, Simultaneous acid diversion and water control in carbonate reservoirs: a case history from Saudi Arabia Nunez Garcia, 2009, Multi-layered reservoir stimulation: case study of effective acid diversion achieved using the associative polymer treatment diverting agent in khuff carbonate reservoir wells in Saudi Arabia's ghawar field Garcia, 2008, Novel acid-diversion technique increases production in the cantarell field, offshore Mexico Al-Harbi, 2010, Associative polymer usage as stimulation diversion system for multilayered reservoirs: case study of its effectiveness for stimulating tight layers in khuff carbonate formation from Saudi Arabia's ghawar field Solares, 2011, Optimized HP/HT acid blends and associative polymer diversion proven to be successful in acid fracturing a multilayered reservoir: a case history from south ghawar gas field in Saudi Arabia K. Kritsanaphak, J.E. Vasquez. Novel acid-diversion technique for matrix acidizing in production and injection wells: case histories of Alger, in: International Petroleum Technology Conference. International Petroleum Technology Conference (2011, January). Kosztin, 2012, Joint stimulation-water shutoff technology leads to extra oil from mature fields Vasquez, 2013, Field implementation of a relative permeability modifier during stimulation treatments: case histories and lessons learned after more than 3,000 treatments Rafie, 2014, The first successful multistage acid frac of an oil producer in Saudi Arabia Scheirs, 2000 Muller, 1980, High molecular weight hydrolyzed polyacrylamides. III. Effect of temperature on chemical stability, J. Appl. Polym. Sci., 25, 627, 10.1002/app.1980.070250409 Thomas, 1985, vol. 169 Caulfield, 2002, Some aspects of the properties and degradation of polyacrylamides, Chem. Rev., 102, 3067, 10.1021/cr010439p Choi, 2008 Al-Anazi, 2002, Use of a pH sensitive polymer for conformance control Lalehrokh, 2009, Application of pH-triggered polymers for deep conformance control in fractured reservoirs Ramsden, 1986, Degradation of polyacrylamide in aqueous solution induced by chemically generated hydroxyl radicals: Part I—Fenton's reagent, Polym. Degrad. Stab., 14, 217, 10.1016/0141-3910(86)90045-5 Ramsden, 1986, The degradation of polyacrylamide in aqueous solution induced by chemically generated hydroxyl radicals: Part II—Autoxidation of Fe2+, Polym. Degrad. Stab., 15, 15, 10.1016/0141-3910(86)90003-0 Ellis, 1984, Kinetic and mechanistic studies of the thermal stabilization of polyacrylamide by metal ions, Polym. Degrad. Stab., 8, 229, 10.1016/0141-3910(84)90020-X Maurer, 1987, Thermal degradation characteristics of poly (acrylamide-co-acrylic acid) and poly (acrylamide-co-sodium acrylate) copolymers, Thermochim. Acta, 121, 295, 10.1016/0040-6031(87)80180-6 Limparyoon, 2011, Acrylamide/2-acrylamido-2-methylpropane sulfonic acid and associated sodium salt superabsorbent copolymer nanocomposites with mica as fire retardants, Polym. Degrad. Stab., 96, 1054, 10.1016/j.polymdegradstab.2011.03.012 Choi, 2014, Temperature-dependent viscosity model of HPAM polymer through high-temperature reservoirs, Polym. Degrad. Stab., 110, 225, 10.1016/j.polymdegradstab.2014.09.006 Vijayalakshmi, 2005, Pulsed laser degradation of polyethylene oxide and polyacrylamide in aqueous solution, Polym. Degrad. Stab., 87, 521, 10.1016/j.polymdegradstab.2004.10.009 Gröllmann, 1982, Free radical-induced oxidative degradation of polyacrylamide in aqueous solution, Polym. Degrad. Stab., 4, 203, 10.1016/0141-3910(82)90027-1