Investigation of the Influence of Powder Moisture on the Spreadability Using the Spreading Tester
Tóm tắt
Moisture is often regarded as one of the main reasons for poor processability of powders using Laser-powder bed fusion (L-PBF) processes. To determine the influence of moisture on the spreadability, a superalloy powder IN718 commonly used for L‑PBF processes has been conditioned in two different states: once in the as-received and dry condition and once in a moist condition obtained by storing the powder for four weeks in an atmosphere containing a relative humidity of 75%. Using a self-built spreading tester and a subsequent analysis method specially developed for testing the spreadability of a powder, the differently conditioned IN718 powder batches have been investigated regarding the surface roughness and flatness of the powder layers. Additionally, the formation of empty spots between the powder particles in the top layer has been studied.
Từ khóa
Tài liệu tham khảo
Raj, B. A.; Jappes, J. T. W.; Khan, M. A.; et al.: Direct Metal Laser Sintered (DMLS) process to develop Inconel 718 alloy for turbine engine components, Optik, 202 (2020), 163735
Pollock, T. M.; Tin, S.: Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties, Journal of Propulsion and Power, 22 (2006), pp 361–374
Patterson, R.; Cox, A.; Reuth, E. V.: Rapid Solidification Rate Processing and Application to Turbine Engine Materials, JOM, 32 (1980), pp 34–39
Prescott, J. K.; Barnum, R. A.: On powder flowability, Pharmaceutical Technology, 24 (2000), pp 60–84
Vock, S.; Klöden, B.; Kirchner, A.; et al.: Powders for powder bed fusion: a review, Progress in Additive Manufacturing, 4 (2019), pp 383–397
Lumay, G.; Boschini, F.; Traina, K.; et al.: Measuring the flowing properties of powders and grains, Powder Technology, 224 (2012), pp 19–27
Hare, C.; Zafar, U.; Ghadiri, M.; et al.: Analysis of the dynamics of the FT4 powder rheometer, Powder Technology, 285 (2015), pp 123–127
Microtrac Retsch GmbH: Ensuring High Quality in the Additive Manufacturing Process, https://www.microtrac.de/dltmp/www/5e396c14-fe94-4af0-83c0-7f30c3c9c754-49caf39811f8/tr_additive_manufacturing_vs_0519_en.pdf (01.07.2020)
Anton Paar GmbH: Methods for Powder and Granular Media Characterization with the Anton Paar Powder Cell, https://www.anton-paar.com/corp-en/services-sup-port/documentfinder/applicationreports/methods-for-powder-and-granular-media-characterization-with-the-anton-paar-powder-cell/ (17.05.2019)
Szemkus, S.; Jahn, S.; Matthes, S.; et al.: Avoiding Humidity Influences for Robust Powder Bed Fusion Processing, Proceedings of EuroPM2017 Congress & Exhibition, Milan, IT, European Powder Metallurgy Association (EPMA), Shrewsbury, UK, 2017, Paper number 3684646
Cordova, L.; Campos, M.; Tinga, T.: Assessment of moisture content and its influence on laser beam melting feedstock, Proceedings of Euro PM2017 Congress & Exhibition, Milan, IT, European Powder Metallurgy Association (EPMA), Shrewsbury, UK, 2017, Paper number 3684585
Olsson, E.; Sundin, S.; Karlsson, L.; et al.: Evaluation of Flowability Measurement Methods and Investigation of Influencing Factors for Flowability of Metal Powders for Additive Manufacturing, Proceedings of Euro PM2019 Congress & Exhibition, Maastricht, NL, European Powder Metallurgy Association (EPMA), Shrewsbury, UK, 2019, Paper number 4346392
Lefebvre, L.-P.; Bernier, F.; Orsoni-Wiemer, N.; et al.: Rheology of Powders: Assessing the Robustness and Impact of Humidity, Tribocharging, Particle Size and Composition, Proceedings of: Euro PM2019 Congress & Exhibition, Maastricht, NL, European Powder Metallurgy Association (EPMA), Shrewsbury, UK, 2019, Paper number 4342266
LPW Technology: Moisture Analysis of Metal Powder Samples by Karl Fischer Titration; Brochure, Runcorn, United Kingdom, 2017
Mellin, P.; Zavalis, T.; Tingö, L.; et al.: Moisture content analysis of metal powders using oven desorption followed by Karl Fischer titration, Metal Powder Report, 75 (2019), pp 34–39
Nan, W.; Pasha, M.; Bonakdar, T.; et al.: Jamming during particle spreading in additive manufacturing, Powder Technology, 338 (2018), pp 253–262
Mitterlehner, M.; Danninger, H.; Gierl-Mayer, C.; et al.: Study on The Influence of the Blade on Powder Layers Built in Powder Bed Fusion Processes for Additive Manufacturing, BHM Berg- und Hüttenmännische Monatshefte, 165 (2020), pp 157–163
Chang, H. C.; Wang, L.-C.: A Simple Proof of Thue’s Theorem on Circle Packing, 2010, arXiv:1009.4322
Mitterlehner, M.; Danninger, H.; Gierl-Mayer, C.: A New Method For Describing The Morphology Of Powder Layers In Direct Laser Melting, Proceedings of 3rd Metal Additive Manufacturing Conference 2018, Vienna, AT, Austrian Society for Metallurgy and Materials (ASMET), Leoben, AT, 2018, pp 31–40
Mitterlehner, M.; Danninger, H.; Gierl-Mayer, C.: Study On Segregation Effects in Powder Layers Built In Powder Bed Fusion Processes For Additive Manufacturing, Proceedings of Euro PM2019 Congress & Exhibition, Maastricht NL, European Powder Metallurgy Association (EPMA), Shrewsbury, UK, 2019, Paper number 4346412
Mitterlehner, M.; Danninger, H.; Gierl-Mayer, C.: Study on the layer building of powders in powder bed fusion processes for Additive Manufacturing, Proceedings of Euro PM2018 Congress & Exhibition, Bilbao ES, European Powder Metallurgy Association (EPMA), Shrewsbury UK, 2018, Paper number 3988826
Mitterlehner, M.; Danninger, H.; Gierl-Mayer, C.; et al.: Processability of Moist Superalloy Powder by SLM, BHM Berg- und Hüttenmännische Monatshefte, this issue