Investigation of physical and mechanical properties of mortars produced by polymer coated perlite aggregate

Journal of Building Engineering - Tập 38 - Trang 102182 - 2021
Veysel Akyuncu1, Firat Sanliturk1
1Tekirdag Namik Kemal University, Department of Civil Engineering, Corlu, 59860, Tekirdag, Turkey

Tài liệu tham khảo

Chandra, 2002 Kramar, 2011, Mechanical properties and size effects in lightweight mortars containing expanded perlite aggregate, Mater. Struct., 44, 735, 10.1617/s11527-010-9662-0 Topçu, 2007, Manufacture of high heat conductivity resistant clay bricks containing perlite, Build. Environ., 42, 3540, 10.1016/j.buildenv.2006.10.016 Diamanti, 2013, Effect of polymer modified cementitious coatings on water and chloride permeability in concrete, Construct. Build. Mater., 49, 720, 10.1016/j.conbuildmat.2013.08.050 Swamy, 1993, An external surface coating to protect concrete and steel from aggressive environments, Mater. Struct., 26, 465, 10.1007/BF02472806 Sengul, 2011, Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete, Energy Build., 43, 671, 10.1016/j.enbuild.2010.11.008 2009 2009 Lura, 2004, Pumice aggregates for internal water curing, 137 Gürsoy, 2016, Hydrophobic coating of expanded perlite particles by plasma polymerization, Chem. Eng. J., 284, 343, 10.1016/j.cej.2015.09.007 Ramakrishnan, 2015, A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites, Appl. Energy, 157, 85, 10.1016/j.apenergy.2015.08.019 Li, 2016, Development of granular expanded perlite/paraffin phase change material composites and prevention of leakage, Sol. Energy, 137, 179, 10.1016/j.solener.2016.08.012 Palomar, 2015, Lime-cement mortars for coating with improved thermal and acoustic performance, Construct. Build. Mater., 75, 206, 10.1016/j.conbuildmat.2014.11.012 Bideci, 2016, The effect of high temperature on lightweight concretes produced with colemanite coated pumice aggregates, Construct. Build. Mater., 113, 631, 10.1016/j.conbuildmat.2016.03.113 Kheradmand, 2015, Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems, Construct. Build. Mater., 89, 48, 10.1016/j.conbuildmat.2015.04.031 Zhang, 2004, Development of thermal energy storage concrete, Cement Concr. Res., 34, 927, 10.1016/j.cemconres.2003.10.022 Ye, 2015, Preparation, mechanical and thermal properties of cement board with expanded perlite based composite phase change material for improving buildings thermal behavior, Materials, 8, 7702, 10.3390/ma8115408 Sutcu, 2015, Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks, Ceram. Int., 41, 2819, 10.1016/j.ceramint.2014.10.102 Kizilkanat, 2008, Compressive strength-color change relationship in mortars subjected to high temperatures, Tek. Dergi, 19, 4381 Chan, 2000, Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800°C, Cement Concr. Res., 30, 247, 10.1016/S0008-8846(99)00240-9 Cülfik, 2002, Effect of elevated temperatures on the residual mechanical properties of high-performance mortar, Cement Concr. Res., 32, 809, 10.1016/S0008-8846(02)00709-3 Mo, 2018, Ling Incorporation of expanded vermiculite lightweight aggregate in cement mortar Constr, Build. Mater., 179, 302, 10.1016/j.conbuildmat.2018.05.219 Mohabbi Yadollahi, 2019, Investigation of elevated temperature on compressive strength and microstructure of alkali activated slag based cements, Eur. J. Environ. Civ. Eng., 1 Koksal, 2015, Combined effect of silica fume and expanded vermiculite on properties of lightweight mortars at ambient and elevated temperatures Constr, Build. Mater., 88, 175, 10.1016/j.conbuildmat.2015.04.021 Ts En 196-1, 2009 Ts En 1015-3, 2000 Cavusoglu, 2013 Nielsen, 1980 Ramakrishnan, 2015, A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites, Appl. Energy, 157, 85, 10.1016/j.apenergy.2015.08.019 2009 2013 2003 Karakoç, 2010 Keskin, 2013, Effect of presoaked expanded perlite aggregate on the dimensional stability and mechanical properties of engineered cementitious composites, J. Mater. Civ. Eng., 25, 763, 10.1061/(ASCE)MT.1943-5533.0000553 Deshpande, 2002, Kinetic aspects of the thermal degradation of poly(methyl siloxane) and poly(dimethyl diphenyl siloxane), Polym. Degrad. Stabil., 76, 17, 10.1016/S0141-3910(01)00261-0 Fares, 2009, Mechanical and physicochemical properties of lightweight self-consolidating concrete subjected to elevated temperatures, 63 Mehta, 1997 Lin, 1996, Microstructures of fire-damaged concrete, ACI Mater. J., 93, 199 Bentz, 2000, Fibers, percolation, and spalling of high-performance concrete, ACI Mater. J., 97, 351 Hammer, 1995 Zhang, 2002, Residual fracture toughness of normal and high strength gravel concrete after heating to 600°C, ACI Mater. J., 99, 217 Lin, 1996, Microstructures of fire-damaged concrete, ACI Mater. J., 93, 199 Xiao, 2004, Study on concrete at high temperature in China-an overview Fire Safety, Journal, 39, 89 Savva, 2005, Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates, Cement Concr. Compos., 27, 239, 10.1016/j.cemconcomp.2004.02.013