Investigation of non-uniform characteristics in a 300 MWth circulating fluidized bed with different coal feeding modes

Wei, 1998, Axial and lateral dispersion of fine particles in a binary-solid riser, The, Can. J. Chem. Eng., 76, 19, 10.1002/cjce.5450760104 Geng, 2016, Experiments on particles flow in a dual circulating fluidized bed with symmetrical structure, Powder Technol., 304, 81, 10.1016/j.powtec.2016.06.053 Alobaid, 2020, Dynamic process simulation for Polish lignite combustion in a 1 MWth circulating fluidized bed during load changes, Appl. Energy, 278, 10.1016/j.apenergy.2020.115662 Li, 2016, Influence of operating parameters on N2O emission in O2/CO2 combustion with high oxygen concentration in circulating fluidized bed, Appl. Energy, 173, 197, 10.1016/j.apenergy.2016.02.054 Ke, 2022, Prediction and minimization of NOx emission in a circulating fluidized bed combustor: A comprehensive mathematical model for CFB combustion, Fuel, 309, 10.1016/j.fuel.2021.122133 Li, 2017, The NETL MFiX suite of multiphase flow models: a brief review and recent applications of MFiX-TFM to fossil energy technologies, Chem. Eng. Sci., 169, 259, 10.1016/j.ces.2016.07.043 Chen, 2017, Modelling of coal/biomass co-gasification in internal circulating fluidized bed using kinetic theory of granular mixture, Energ. Conver. Manage., 148, 506, 10.1016/j.enconman.2017.05.080 Lin, 2022, Particle-scale study of coal-direct chemical looping combustion (CLC), Energy, 250, 10.1016/j.energy.2022.123859 Zhou, 2011, Two-dimensional computational fluid dynamics simulation of coal combustion in a circulating fluidized bed combustor, Chem. Eng. J., 166, 306, 10.1016/j.cej.2010.09.048 Golshan, 2020, Review and implementation of CFD-DEM applied to chemical process systems, Chem. Eng. Sci., 221, 10.1016/j.ces.2020.115646 Azmir, 2020, CFD-DEM study of the effects of food grain properties on drying and shrinkage in a fluidised bed, Powder Technol., 360, 33, 10.1016/j.powtec.2019.10.021 Hu, 2020, Influences of secondary gas injection pattern on fluidized bed combustion process: A CFD-DEM study, Fuel, 268, 10.1016/j.fuel.2020.117314 Wang, 2020, CFD-DEM coupled with thermochemical sub-models for biomass gasification: Validation and sensitivity analysis, Chem. Eng. Sci., 217, 10.1016/j.ces.2020.115550 Lin, 2022, Three-dimensional simulation of a gas-fueled chemical looping combustion system with dual circulating fluidized bed reactors, Energy, 246, 10.1016/j.energy.2022.123293 Wang, 2022, Particle-scale modelling of the pyrolysis of end-of-life solar panel particles in fluidized bed reactors, Resour. Conserv. Recycl., 183, 10.1016/j.resconrec.2022.106378 Zeneli, 2017, Simulation of the reacting flow within a pilot scale calciner by means of a three phase TFM model, Fuel Process. Technol., 162, 105, 10.1016/j.fuproc.2017.03.032 Kong, 2020, Three-dimensional full-loop numerical simulation of co-combustion of coal and refuse derived fuel in a pilot-scale circulating fluidized bed boiler, Chem. Eng. Sci., 220, 10.1016/j.ces.2020.115612 Gu, 2020, Study on oxy-fuel combustion behaviors in a S-CO2 CFB by 3D CFD simulation, Chem. Eng. Sci., 211, 10.1016/j.ces.2019.115262 Blaser, 2012, Validation and application of computational modeling to reduce erosion in a circulating fluidized bed boiler, Int. J. Chem. React. Eng., 10 Xie, 2017, Simulation of combustion of municipal solid waste and coal in an industrial-scale circulating fluidized bed boiler, Energy Fuel, 31, 14248, 10.1021/acs.energyfuels.7b02693 Snider, 2011, Eulerian-Lagrangian method for three-dimensional thermal reacting flow with application to coal gasifiers, Chem. Eng. Sci., 66, 1285, 10.1016/j.ces.2010.12.042 Rourke, 2010, An improved collision damping time for MP-PIC calculations of dense particle flows with applications to polydisperse sedimenting beds and colliding particle jets, Chem. Eng. Sci., 65, 6014, 10.1016/j.ces.2010.08.032 Smagorinsky, 1963, General circulation experiments with the primitive equations: I, The basic experiment, Monthly weather review., 91, 99, 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2 Rourke, 2009, A model for collisional exchange in gas/liquid/solid fluidized beds, Chem. Eng. Sci., 64, 1784, 10.1016/j.ces.2008.12.014 Xie, 2018, MP-PIC modeling of CFB risers with homogeneous and heterogeneous drag models, Adv. Powder Technol., 29, 2859, 10.1016/j.apt.2018.08.007 Wan, 2020, Distribution and particle-scale thermochemical property of biomass in the gasifier of a dual fluidized bed, Energ. Conver. Manage., 209, 10.1016/j.enconman.2020.112672 Kraft, 2017, CPFD simulations of an industrial-sized dual fluidized bed steam gasification system of biomass with 8MW fuel input, Appl. Energy, 190, 408, 10.1016/j.apenergy.2016.12.113 Harris, 1994, Solitons, solitary waves, and voidage disturbances in gas-fluidized beds, J. Fluid Mech., 266, 243, 10.1017/S0022112094000996 Beetstra, 2007, Numerical study of segregation using a new drag force correlation for polydisperse systems derived from lattice-Boltzmann simulations, Chem. Eng. Sci., 62, 246, 10.1016/j.ces.2006.08.054 Beetstra, 2007, Drag force of intermediate Reynolds number flow past mono-and bidisperse arrays of spheres, AIChE J, 53, 489, 10.1002/aic.11065 Gungor, 2008, Two-dimensional coal combustion modeling of CFB, Int. J. Therm. Sci., 47, 157, 10.1016/j.ijthermalsci.2007.01.017 Yoon, 1978, A model for moving-bed coal gasification reactors, AIChE J, 24, 885, 10.1002/aic.690240515 R. Loison, Pyrolyse rapide du charbon, 1964. Wu, 2018, Three-dimensional CFD simulation of oxy-fuel combustion in a circulating fluidized bed with warm flue gas recycle, Fuel, 216, 596, 10.1016/j.fuel.2017.12.042 Ku, 2015, CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor, Chem. Eng. Sci., 122, 270, 10.1016/j.ces.2014.08.045 Wang, 2021, Particle-scale study of heat and mass transfer in a bubbling fluidised bed, Chem. Eng. Sci., 240, 10.1016/j.ces.2021.116655 Li, 2018, Numerical simulation research on gas-solid flow and combustion process of 300 MW circulated fluidized bed and related engineering applications, Guangdong Electric, Power, 31, 56 Wang, 2017, CFD-DEM study of the effect of cyclone arrangements on the gas-solid flow dynamics in the full-loop circulating fluidized bed, Chem. Eng. Sci., 172, 199, 10.1016/j.ces.2017.05.052 Lu, 2013, 3-D full-loop simulation of an industrial-scale circulating fluidized-bed boiler, AIChE J, 59, 1108, 10.1002/aic.13917 Bai, 2012, Experimental investigation on co-firing of coal and refuse-derived fuel in a pilot-scale circulating fluidized bed combustor, Zhongguo Dianji Gongcheng Xuebao(Proceedings of the Chinese Society of Electrical Engineering), Chinese Society for, Electr. Eng., 36 Bruchmüller, 2012, Modeling the thermochemical degradation of biomass inside a fast pyrolysis fluidized bed reactor, AIChE J, 58, 3030, 10.1002/aic.13705 Hu, 2018, Computational fluid dynamics/discrete element method investigation on the biomass fast pyrolysis: The influences of shrinkage patterns and operating parameters, Ind. Eng. Chem. Res., 58, 1404, 10.1021/acs.iecr.8b05279 Hayhurst, 1998, Does solid carbon burn in oxygen to give the gaseous intermediate CO or produce CO2 directly?, Some experiments in a hot bed of sand fluidized by air, Chemical Engineering Science., 53, 427 Hayhurst, 2002, Measurement of the mass transfer coefficient and Sherwood number for carbon spheres burning in a bubbling fluidized bed, Combust. Flame, 130, 361, 10.1016/S0010-2180(02)00387-5 Geng, 2011, An extended DEM–CFD model for char combustion in a bubbling fluidized bed combustor of inert sand, Chem. Eng. Sci., 66, 207, 10.1016/j.ces.2010.10.011 Yang, 2020, Numerical study of biomass gasification in a 0.3 MWth full-loop circulating fluidized bed gasifier, Energ. Conver. Manage., 223, 10.1016/j.enconman.2020.113439 Derksen, 2008, Two-way coupled large-eddy simulations of the gas-solid flow in cyclone separators, AIChE J, 54, 872, 10.1002/aic.11418 Wang, 2018, Particle-scale investigation of heat transfer and erosion characteristics in a three-dimensional circulating fluidized bed, Ind. Eng. Chem. Res., 57, 6774, 10.1021/acs.iecr.8b00353 Zhou, 2012, Non-uniform distribution of gas–solid flow through six parallel cyclones in a CFB system: An experimental study, Particuology., 10, 170, 10.1016/j.partic.2011.10.006 Ergun, 1949, Fluid flow through randomly packed columns and fluidized beds, Ind. Eng. Chem., 41, 1179, 10.1021/ie50474a011 Lacey, 1954, Developments in the theory of particle mixing, J. Appl. Chem., 4, 257, 10.1002/jctb.5010040504 Andreux, 2008, Hydrodynamic and solid residence time distribution in a circulating fluidized bed: experimental and 3D computational study, Chem. Eng. Process., 47, 463, 10.1016/j.cep.2007.01.023 Hua, 2018, Residence time distribution of particles in circulating fluidized bed risers, Chem. Eng. Sci., 186, 168, 10.1016/j.ces.2018.04.027 Wang, 2018, Effect of superficial gas velocity on solid behaviors in a full-loop CFB, Powder Technol., 333, 91, 10.1016/j.powtec.2018.04.011 Harris, 2003, Particle residence time distributions in circulating fluidised beds, Chem. Eng. Sci., 58, 2181, 10.1016/S0009-2509(03)00082-4 Hu, 2019, Influences of operating parameters on the fluidized bed coal gasification process: A coarse-grained CFD-DEM study, Chem. Eng. Sci., 195, 693, 10.1016/j.ces.2018.10.015 Zhou, 2020, Numerical investigation of biomass co-combustion with methane for NOx reduction, Energy, 194, 10.1016/j.energy.2019.116868