Investigation of loops and paths as optimization tools for total annual cost in heat exchanger networks

B. U. Ogbonnaya1, O. S. Azeez1,2, H. F. Akande3, E. Muzenda2,4
1Department of Chemical Engineering, Federal University of Technology, Minna, Nigeria
2Chemical Engineering Department, Botswana International University of Science and Technology, Palapye, Botswana
3Department of Chemical Engineering, Kaduna Polytechnic, Kaduna, Nigeria
4Department of Chemical Engineering, University of Johannesburg, Johannesburg, South Africa

Tóm tắt

This research investigates the effectiveness of loops and paths as embedded in a modified pinch package (Aspen Energy Analyzer), that comprises a blend of traditional pinch technique with mathematical programming, in simultaneous optimization of total annual cost (TAC) in heat exchanger network synthesis (HENS). It uses composite curves, grand composites curves, supertargeting and looping system just as in pinch, as well as linear programming and mixed integer linear programming (MILP) in the design of HENs. The tool was adopted in solving some literature problems that had earlier been solved using pinch and mathematical programming techniques. The results obtained compared well with those of various authors that used different techniques as shown in the tables of cost comparison in this paper. The loop and path optimization technique adopted in this research obtained the least TAC in four out of five problems solved in this paper. This shows that loop and path optimization as available in a software-combining pinch and mathematical programming can be more effective than various other methods that have been adopted in the literature. It further demonstrated that no particular technique can return the lowest TAC for all HENS problems.

Tài liệu tham khảo

Ogbonnaya, B.U.: Optimization of total annual cost of heat exchanger networks using modified B. Tech Thesis, chemical engineering department, federal university of technology, Minna. Nigeria (2018) Linnhoff, B.: Pinch analysis; a state of the art overview. Chem. Eng. Res. Des. 71, 503–522 (1993) Krishna, M.Y., Murty, C.V.S.: Synthesis of cost-optimal heat exchanger networks using differential evolution. Comput. Chem. Eng. 32, 1861–1876 (2008) Azeez, O.S., Isafiade, A.J., Fraser, D.M.: Supply-based Superstructure synthesis of heat and mass exchanger networks. Chem. Eng. Res. Des. 56, 184–201 (2013) Azeez, O.S., Isafiade, A.J., Fraser, D.M.: Supply and target based superstructure synthesis of heat and mass exchanger networks. Chem. Eng. Res. Des. 90, 266–287 (2012) Rezaei, E., Safiei, S.: An NLP approach for evolution of heat exchanger networks designed by pinch technology. Ir. J. Chem. Eng. 5(1), 13–21 (2008). (Winter) Smith, R.: Chemical Process Design and Integration. John Wiley and Sons Ltd, (2005) Pinch Technology: Basics for beginners extracted from the chemical engineers' resource page; www.cheresources.com (Accessed October, 2017) Yee, T.F., Grossmann, I.E.: Simultaneous optimization models for heat integration: II. Heat exchanger network synthesis. Comp. Chem. Eng. 14(10), 1165–1184 (1990) Isafiade, A.J., Fraser, D.M.: Interval–based MINLP superstructure synthesis of heat exchange networks. Chem. Eng. Res. Des. 86, 245–257 (2008) Storm, R.M., Price, K.: Differential evolution: a simple and efficient adaptive scheme for global optimization over continuous spaces. J. Global Optim. 23(1) (1995) Aspen Energy Analyzer, [Computer Software] Version 8.8 AspenTech: Aspen energy analyzer. Reference guide, Aspen Technology Inc, Burlington, USA (2008) Itoh, J., Shiroko, K., Umeda, T.: Extensive Application of the T-Q Diagram to Heat Integrated System Synthesis. Proceedings (Technical Sessions) International Symposium on Process System Engineering (PSE-82), 92–99, Kyoto, Japan (1982) Linnhoff, B., Ahmad, S.: SUPERTARGETING: Optimum synthesis of energy management systems. J. Energy Res. Technol. 111(3), 121–130 (1989) Linnhoff, B., Townsend, D.W., Boland, D., Hewitt, G.F., Thomas, B.E.A., Guy, A.R., Marsland, R.H.: A user guide on process integration for the efficient use of energy. The institute of chemical engineering, U.K. (1982) Shenoy, U.V., Sinha, A., Bandyopadhyay, S.: Multiple utilities targeting for heat exchanger networks. Trans. IChemE. Chem. Eng. Res. Des. 76, 259–272 (1998) Townsend, D.W., Linnhoff, B.: 1984. Surface area targets for heat exchanger networks, IChemE Annual Research Meeting, Bath, UK (1984) Ahmad, S., Smith, R.: Targets and design for minimum number of shells in heat exchanger networks. Trans. IChemE. ChERD. 67, 481 (1989) Linnhoff, B., Mason, D.R., Wardle, I.: Understanding heat exchanger networks. Comp. Chem. Eng. 3, 295 (1979) Kemp, I.C.: Pinch analysis and process integration: a user guide on process integration for the efficient use of energy. 2nd Edition, Butterworth-Heinemann. Linacre House, Jordan (2007) March, L.: Introduction to pinch technology, Targeting house, Cheshire, England, 30–38 (1998) Grossmann, I.E.: Magnets user guide. Carnegie Mellon University, Pittsburgh (1985) Zamora, J.M., Grossmann, I.E.: A global MINLP optimization for the synthesis of heat exchanger networks with no stream splits. Comput. Chem. Eng. 22(3), 367–384 (1998) Priyani, A., Gupta, A., Ghosh, P.: Design of heat exchanger networks using randomized algorithm. Comput. Chem. Eng. 30, 1046–1053 (2006) Lukman, Y., Suleiman, B. and Azeez, O.S.: Analysis of heat exchanger networks for minimum total annual cost (TAC) using pinch analysis, proceedings from the 1st international engineering conference (IEC), (2015) Papoulias, S.A., Grossmann, I.E.: A structural optimization approach in process synthesis-II Heat recovery networks. Comput. Chem. Eng. 7, 707 (1983) Linnhoff, B., Flower, J.R.: Synthesis of heat exchanger networks, I. Systematic generation of energy optimal networks. AICHE J. 24(4), 633–642 (1978) Lee, K.F., Masso, A.H., Rudd, D.F.: Branch and bound synthesis of integrated process designs. Ind. Eng. Chem. Fundamentals. 9(1), 48–58 (1970) Grossmann, I.E., Sargent, R.W.: Optimum design of heat exchanger networks. Comput. Chem. Eng. 2, 1–7 (1978) Bagajewicz, M.J., Pham, R., Manousiouthakis, V.: On the state space approach to mass/heat exchanger network design. Chem. Eng. Sci. 53(14), 2595–2621 (1998) Dolan, W.B., Cummings, P.T., and LeVan, M.D.: Heat exchanger network design by simulated annealing. In Proceedings of the first international conference on foundations of computer aided process operations (1987) Lewin, D.R.: A generalized method for HEN synthesis using stochastic optimization- II. The synthesis of cost-optimal networks. Comp. Chem. Eng. 22(10), 1387–1405 (1998) Lin, B., Miller, D.C.: Solving heat exchanger network problems with tabu search. Comput. Chem. Eng. 14(7), 729–750 (2004) Ahmad, S.: Heat exchanger networks: Cost tradeoffs in energy and capital. Ph.D. Thesis. UK: UMIST Manchester (1985) Ravagnani, M.A.S.S., Silva, A.P., Arroyo, P.A., Constantino, A.A.: Heat exchanger network synthesis and optimization using Genetic Algorithm. Appl. Therm. Eng. 25, 1003–1017 (2005) Zhu, X.X., O’Neil, B.K., Roach, J.R., Wood, R.M.: A method for automated heat exchanger synthesis using block decomposition and non-linear optimization. Chem. Eng. Res. Des. Part A. 73(11), 919–930 (1995) Linnhoff, B., Ahmad, S.: Cost optimum heat exchanger networks 1; Minimum energy and capital using simple models for capital cost. Comput. Chem. Eng. 14(7), 729–750 (1990) Pettersson, F.: Synthesis of large scale heat exchanger networks using a sequential match reduction approach. Comp. Chem. Eng. 29(5), 993–1007 (2005)