Investigation of gelatin enabled abrasive water slurry jet machining (AWSJM)

Nouraei, 2013, Characteristics of Abrasive Slurry Jet Micro-machining. A comparison With Abrasive Air Jet Micro-Machining, Journal of Materials Processing Technology, 213, 1711, 10.1016/j.jmatprotec.2013.03.024 Cheng, 2011, A Study on the Micro Tooling for Micro/Nano Milling, The International Journal of Advanced Manufacturing Technology, 53, 523, 10.1007/s00170-010-2856-3 Jeykrishna, 2019, Optimization of Process Parameters in Abrasive Water Jet Machining/Cutting (AWJM) of Nickel Alloy Using Traditional Analysis to Minimize Kerf Taper Angle, Material Today Proceedings, 16, 392, 10.1016/j.matpr.2019.05.106 Aswathy, 2015, Modeling of Abrasive Water Jet Machining Process, International Journal of Recent Advances in Mechanical Engineering, 4, 59, 10.14810/ijmech.2015.4305 Liu, 2003, Computational Fluid Dynamics (CFD) Simulation of Ultrahigh Velocity Abrasive Water Jet, Key Engineering Materials, 233–236, 477, 10.4028/www.scientific.net/KEM.233-236.477 Liu, 2004, A study of Abrasive Water Jet Characteristics by CFD Simulation, Journal of Material Processing Technology, 153-154, 488, 10.1016/j.jmatprotec.2004.04.037 Naser, 2015, Effect of Entrained Air in Abrasive Water Jet Micro-Machining: Reduction of Channel Width and Waviness Using Slurry Entrainment, Wear, 344–345, 99 Jafar, 2015, Erosion Modeling in Abrasive Slurry Jet Micro-Machining of Brittle Material, Journal of Manufacturing Processes, 17, 127, 10.1016/j.jmapro.2014.08.006 Patel, 2015, Experimental Investigations of Thermally Enhanced Abrasive Water Slurry Jet Machining of Hard To Machine Metals, CIRP Journal of Manufacturing Science and Technology, 10, 92, 10.1016/j.cirpj.2015.04.002 Patel, 2016, Experimental Investigations of Gelatin Enabled Abrasive Water Slurry Jet Machining, The International Journal of Advanced Manufacturing Technology, 89, 1193, 10.1007/s00170-016-9154-7 Radovanoic, 2020, Multi-Objective Optimization of Abrasive Water Jet Cutting Using MOGA, Procedia Manufacturing, 47, 781, 10.1016/j.promfg.2020.04.241 Yuvaraj, 2017, Study and Evaluation of Abrasive Water Jet Cutting Performance on AA5083-H32 Aluminum Alloy by Varying the Jet Impingement Angles With Different Abrasive Mesh Sizes, Machining Science and Technology, 21, 385, 10.1080/10910344.2017.1283958 Pang, 2012, Modeling of the Micro-Channeling Process on Glasses Using an Abrasive Slurry Jet, International Journal of Machine Tool and Manufacture, 53, 118, 10.1016/j.ijmachtools.2011.10.005 Ahmed, 2018, Improving Surface Roughness of Abrasive Water Jet Cutting Process by Using Statistical Modeling, CIRP Journal of Manufacturing Science and Technology, 22, 30, 10.1016/j.cirpj.2018.03.004 Sasikumar, 2016, A Study on Kerf Characteristics of Hybrid Aluminium 7075 Metal Matrix Composites Machined using Abrasive Water Jet Machining Technology, Proceeding Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232, 690, 10.1177/0954405416654085 Li, 2016, Radial-mode Abrasive Water Jet Turning of Short Carbon – Fiber – Reinforced Plastics, Machining Science and Technology, 20, 231, 10.1080/10910344.2016.1165836 Thongkaew, 2019, An Investigation of the Hole Machining Processes on Woven Carbon – Fibre Reinforced Polymers (CFRPS) using Abrasive Water Jets, Machining Science and Technology, 23, 19, 10.1080/10910344.2018.1449217 Momber, 1998, Principle of Abrasive Water Jet Machining, Springer-Verlag Landon Limited., 69, 3830 Pang, 2012, A Study of Micro-Channeling on Glasses Using an Abrasive Slurry Jet, Machining Science and Technology, 16, 547, 10.1080/10910344.2012.731947 Paul, 1998, Analytical Modeling of the Total Depth of Cut in the Abrasive Water Jet Machining of Polycrystalline Brittle Material, Journal of Materials Processing Technology, 73, 206, 10.1016/S0924-0136(97)00230-6 Guo, 1993, Surface Structure and Kerf Geometry in Abrasive Water Jet Cutting: Formation and Optimization, 515 Wang, 2017, Exploring Kerf cut by Abrasive Water Jet, The International Journal of Advanced Manufacturing Technology, 5-8, 2013, 10.1007/s00170-017-0467-y Bitter, 1963, A Study of Erosion Phenomena, Part 1, Wear, 6, 5, 10.1016/0043-1648(63)90003-6 Finnie, 1960, Erosion of Surfaces by Solid Particles Oberflächenerosion Durch Feste Teilchen, Wear, 3, 87, 10.1016/0043-1648(60)90055-7 Teti, 2019, Jet Properties and Mixing Chamber Flow in a High-pressure Abrasive Slurry Jet: Part II – Machining Rates and CFD Modeling, The International Journal of Advanced Manufacturing Technology, 101, 3021, 10.1007/s00170-018-3041-3 Eymard, 2002, 717 Zhang, 2020, Investigation on Particle Motions And Resultant Impact Erosion on Quartz Crystal by the Micro-Particle Laden Water Jet and Air Jet, Powder Technology, 360, 452, 10.1016/j.powtec.2019.10.032 He, 2020, Numerical Investigation of Surface Topography and Residual Stress after Abrasive Water Jet Sequential Peening (AWJSP), Machining Science and Technology, 24, 592, 10.1080/10910344.2020.1752233 Hashish, 1984, A Modeling Study of Metal Cutting with Abrasive Waterjets, Journal of Engineering Material and Technology, 106, 88, 10.1115/1.3225682