Investigation of different flow parameters on air layer drag reduction (ALDR) performance using a hybrid stability analysis and numerical solution of the two-phase flow equations
Tài liệu tham khảo
Butterworth, 2015, Experimental analysis of an air cavity concept applied on a ship hull to improve the hull resistance, Ocean. Eng., 110, 2, 10.1016/j.oceaneng.2015.10.022
Daniello, 2009, Drag reduction in turbulent flows over superhydrophobic surfaces, Phys. Fluids, 8
Elbing, 2013, On the scaling of air layer drag reduction, J. Fluid Mech., 717, 484, 10.1017/jfm.2012.588
Elbing, 2008, Bubble-induced skin-friction drag reduction and the abrupt transition to air-layer drag reduction, J. Fluid Mech., 612, 201, 10.1017/S0022112008003029
Henoch, 2006
Jang, 2014, Experimental investigation of frictional resistance reduction with air layer on the hull bottom of a ship, Int. J. Nav. Archit. Ocean. Eng., 6, 363, 10.2478/IJNAOE-2013-0185
Kanai, 2001, Direct numerical simulation of wall turbulent flows with microbubbles, Int. J. Numer. Methods Fluids, 35, 595, 10.1002/1097-0363(20010315)35:5<593::AID-FLD105>3.0.CO;2-U
Kim, 2010
Kodama, 2000, Experimental study on microbubbles and their applicability to ships for skin friction reduction, Int. J. Heat Fluid Flow, 21, 582, 10.1016/S0142-727X(00)00048-5
Lee, 2008, Structured surfaces for a giant liquid slip, Phys. Rev. Lett., 101, 10.1103/PhysRevLett.101.064501
Lee, 2009, Maximizing the giant liquid slip on superhydrophobic microstructures by nanostructuring their sidewalls, Langmuir, 25, 12812, 10.1021/la901824d
Lee, 2011, Influence of surface hierarchy of superhydrophobic surfaces on liquid slip, Langmuir, 27, 4243, 10.1021/la104368v
Li, 2009, On the measurement of slip length for liquid flow over super-hydrophobic surface, Chin. Sci. Bull., 54, 4560
Maali, 2012, Measurement of slip length on superhydrophobic surfaces, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 370, 2304, 10.1098/rsta.2011.0505
Madavan, 1984, Reduction of turbulent skin friction by microbubbles, Phys. Fluids, 27, 356, 10.1063/1.864620
Makiharju, 2013, On the scaling of air entrainment from a ventilated partial cavity, J. Fluid Mech., 732, 47, 10.1017/jfm.2013.387
Maltzev, 1995, Jet methods of gas injection into fluid boundary layer for drag reduction, Appl. Sci. Res., 54, 281, 10.1007/BF00863514
McCormick, 1973, Drag reduction of a submersible hull by electrolysis, Nav. Eng. J., 85, 11, 10.1111/j.1559-3584.1973.tb04788.x
Merkle, 1990, Drag reduction in liquid boundary layers by gas injection, Viscous Drag Reduct. Bound. Layers, 123, 351
Montazeri, 2019, An efficient method for numerical modeling of thin air layer drag reduction on flat plate and prediction of flow instabilities, Ocean. Eng., 179, 22, 10.1016/j.oceaneng.2019.03.016
Murai, 2014, Frictional drag reduction by bubble injection, Exp. Fluid, 55, 1773, 10.1007/s00348-014-1773-x
Park, 2015, Drag reduction promoted by repetitive bubble injection in turbulent channel flows, Int. J. Multiph. Flow, 75, 12, 10.1016/j.ijmultiphaseflow.2015.05.003
Rotte, 2016, On the physical mechanisms for the numerical modelling of flows around air lubricated ships
Sanders, 2006, Bubble friction drag reduction in a high-Reynolds-number flat-plate turbulent boundary layer, J. Fluid Mech., 552, 353, 10.1017/S0022112006008688
Soderberg, 2003, Absolute and convective instability of a relaxational plane liquid jet, J. Fluid Mech., 493, 89, 10.1017/S0022112003005871
Song, 2014, Drag reduction using superhydrophobic sanded Teflon surfaces, Exp. Fluid, 55, 1783, 10.1007/s00348-014-1783-8
Verschoof, 2016, Bubble drag reduction requires large bubbles, Phys. Rev. Lett., 117, 104502, 10.1103/PhysRevLett.117.104502
Wang, 2014, Underwater drag reduction by gas, Friction, 2, 295, 10.1007/s40544-014-0070-2
Wang, 2010, 4276
Watanabe, 1998, Measurements of drag reduction by microbubbles using very long ship models, J. Soc. Nav. Archit. Jpn., 53, 10.2534/jjasnaoe1968.1998.53