Investigation of a set procedure for the stability of pressure control in the newly developed flow-control system at KRISS

MAPAN - Tập 24 - Trang 89-94 - 2009
S. S. Hong1, Wakil Khan1,2, S. W. Kang1
1Vacuum Technology Center, KRISS, Daejeon, Republic of Korea
2University of Science & Technology (UST), Daejeon, Republic of Korea

Tóm tắt

Korea Research Institute of Standards and Science (KRISS) has assembled a new flow-control system (FCS-705) for the study of advanced applications and calibration of different types of vacuum gauges by comparison method. This report details the measurement of the outgassing rate of the main vacuum chamber by the pressure rate of rise method. Constant pressure was generated inside the vacuum chamber by employing a dynamic flow control method. Nitrogen gas flow data was recorded to demonstrate that constant pressure was controlled in the vacuum chamber. The measurements were performed in a sequence of increasing pressures.

Tài liệu tham khảo

I. Goleki and J. Rossel, Advanced Undergraduate Experiments in Vacuum Physics and Mass Spectrometry, J. Vac. Sci. Technol., 17 (1980) 66. N. S. Harris, A Laboratory Package for Training in Vacuum Technology, J. Vac. Sci. Technol., 20 (1982) 1408. J.M.F. Santos, Expanding the Experiments Performed with Undergraduate Comprehensive High-Vacuum System, Eur. J. Phys., 11 (1990) 130. J.M.F. Santos, J.F.C.A. Velose and C.M.B. Monteiro, Permeability Measurements in Undergraduate Vacuum Laboratories: A Simple Experiment Using a He Leak Detector, Eur. J. Phys., 25 (2004) L1–L3. S.S. Hong, Y.H. Shin, K.H. Chung and I. Arakawa, The Static Expansion System as a New Medium Vacuum Primary Standard in KRISS, Metrologia, 42 (2005) 173. S.S. Hong, Y.H. Shin and K.H. Chung, Measurement Uncertainties for Vacuum Standards at Korea Research Institute of Standards and Science, J. Vac. Sci. Technol., A24 (2006) 1831. S.S. Hong, J.T. Kim and Y.H. Shin, Development of an in situ Vacuum Gauge Calibration System, Meas. Sci. Technol., 19 (2008) 015102. Y. Yang, K. Saitoh and S. Tsukahara, An Improved Throughout Method for Measurement of Outgassing Rates of Materials, Vacuum, 46 (1995) 1371. S. Ichimura et al, Mesurement of Outgassing Characteristics from a Vacuum Chamber Fabricated for Pressure Calibration in UHV/XHV Region, Vacuum, 53 (1999) 291. J.M.F. Santos, Simple Vacuum Experiments for Undergraduate Student Laboratories, Vacuum, 80 (2005) 258.