Investigation of Special Misorientations in Lath Martensite of Low-Carbon Steel Using the Method of Orientation Microscopy

N. Yu. Zolotarevskii, E. V. Nesterova, A. S. Rubtsov, and V. V. Rybin, “High-angle boundaries arising upon phase transformations,” Poverkhnost: Fiz., Khim., Mekh., No. 5, 30–35 (1982).

Y. Adachi, M. Wakita, H. Beladi, and P. D. Hodgson, “The formation of ultrafine ferrite through static transformation in low carbon steels,” Acta Mater. 55, 4925–4934 (2007).

R. Shukla, S. K. Ghosh, D. Chakrabarti, and S. Chatterjee, “Microstructure, texture, property relationship in thermo-mechanically processed ultra-low carbon micro alloyed steel for pipe line application,” Mater. Sci. Eng., A 587, 201–208 (2013).

W. Gong, Y. Tomota, Y. Adachi, A. M. Paradowska, J. F. Kelleher, and S. Y. Zhang, “Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel,” Acta Mater. 61, 4142–4154 (2013).

K. D. Zilnyk, V. B. Oliveira, H. R. Z. Sandim, A. Moslang, and D. Raabe, “Martensitic transformation in eurofer-97 and ODS-eurofer steels: A comparative study,” J. Nucl. Mater. 462, 360–367 (2015).

V. M. Schastlivtsev, D. P. Rodionov, V. D. Sadovskii, and L. V. Smirnov, “Some structural features of quenched melt-grown single crystals of structural steels,” Fiz. Met. Metalloved. 30, 1238–1244 (1970).

V. M. Schastlivtsev, L. B. Blind, D. P. Rodionov, and I. L. Yakovleva, “Structure of martensite packets in engineering steels,” Fiz. Met. Metalloved. 66, 759–769 (1988).

Yu. G. Andreev, E. I. Zarkova, and M. A. Shtremel’, “Boundaries and subboundaries in packet martensite. I. Boundaries between crystals in packet,” Fiz. Met. Metalloved. No. 3, 161–167 (1990).

M. A. Shtremel’, Yu. G. Andreev, and D. A. Kozlov, “Structure and strength of lath martensite,” Metal Sci. Heat Treat. 41, 140–145 (1999).

V. M. Schastlivtsev, “Structure and crystallography of the lath martensite of structural steels,” Russ. Metall. (Metally) 2001, 467–475 (2001).

S. Zaefferer, P. Romano, and F. Friedel, “EBSD as a tool to identify and quantify bainite and ferrite in low-alloyed Al-TRIP steels,” J. Microsc. 230, 499–508 (2008).

S. Zaefferer, “A critical review of orientation microscopy in SEM and TEM,” Crystal Res. Technol. 46, 607–628 (2011).

A. Kobler, A. Kashiwar, H. Hahn, and C. Kubel, “Combination of in situ straining and ACOM TEM: A novel method for analysis of plastic deformation of nanocrystalline metals,” Ultramicroscopy 128, 68–81 (2013).

A. Albou, M. Galceran, K. Renard, S. Godet, and P. J. Jacques, “Nanoscale characterization of the evolution of the twin-matrix orientation in Fe–Mn–C twinning-induced plasticity steel by means of transmission electron microscopy orientation mapping,” Scr. Mater. 68, 400–403 (2013).

A. I. Stepanov, I. N. Ashikhmina, K. I. Sergeeva, S. V. Belikov, S. A. Musikhin, M. S. Karabanalov, and A. A. Al’-Katavi, “Structure and properties of low-alloy Cr–Mo–V steel after austenitization in the intercritical temperature range,” Steel Transl. 44, 469–473 (2014).

G. M. Rusakov, M. L. Lobanov, A. A. Redikul’tsev, and A. S. Belyaevskikh, “Special misorientations and textural heredity in the commercial alloy Fe–3% Si,” Phys. Met. Metallogr. 115, 775–785 (2014).

Ehab El-Danaf, Muneer Baig, Abdulhakim Almajid, Waleed Alshalfan, Marawan Al-Mojil, and Saeed Al-Shahrani, “Mechanical, microstructure and texture characterization of API X65 steel,” Mater. Des. 47, 529–538 (2013).

Xiaolong Yang, Yun-bo Xu, Xiao-dong Tan, and Di Wu, “Influences of crystallography and delamination on anisotropy of charpy impact toughness in API X100 pipeline steel,” Mater. Sci. Eng., A 607, 53–62 (2014).

I. Pyshmintsev, A. Gervasyev, R. H. Petrov, V. Carretero Olalla, and L. Kestens, “Crystallographic texture as a factor enabling ductile fracture arrest in high strength pipeline steel,” Mater. Sci. Forum 702–703, 770–773 (2012).