Investigation and optimization of factors affecting the accuracy of strain measurement via digital image processing

Ivan Miskdjian1, Hossam Hodhod1, Mostafa A. M. Abdeen1, Mohamed Elshabrawy2
1Department of Engineering Mathematics and Physics, Faculty of Engineering, Cairo University, 1 Gamaa Street, Giza, Egypt
2Department of Mechanical Engineering, Faculty of Engineering, Nile University, 26Th of July Corridor, Sheikh Zayed City, Giza, Egypt

Tóm tắt

AbstractDigital image processing is used to create an optical extensometer to measure deformation in materials under quasi-static loading. The optical extensometer setup created in the present work is a single camera setup which is a two-dimensional system. The main objective of this work is to create an optical extensometer system by digital image processing to measure the deformation and strain in materials under tensile and compressive loading and to calculate the properties of these materials. Furthermore, the aim is to optimize the parameters used in digital image processing by studying the effect of different parameters on the quality of the digital images and performing statistical analysis in order to attain the best configuration of the camera setup. The setup is implemented by acquiring digital images of the tested specimens simultaneously with the load recorded by the load cell, and user-friendly software is developed to analyze the acquired images and measure deformation and strain. Subsequently, the loads can be inserted, and the mechanical properties of the materials tested can be calculated.

Từ khóa


Tài liệu tham khảo

Růžička J (2022) Strain gauge placement optimization methodology to measure multiaxial loads of complex structure. J Strain Anal Eng Des 57(7):614–628. https://doi.org/10.1177/03093247211063088

Shinoda M, Bathurst RJ (2004) Strain measurement of geogrids using a video-extensometer technique. Geotech Test J 27(5):456–463. https://doi.org/10.1520/gtj11940

Jachym R, Kwieciński K (2014) Using digital image analysis to measure surface deformation of structural objects. Weld Int 28(1):39–44. https://doi.org/10.1080/09507116.2012.753212

Pan B, Wang B (2016) Digital image correlation with enhanced accuracy and efficiency: a comparison of two subpixel registration algorithms. Exp Mech 56(8):1395–1409. https://doi.org/10.1007/s11340-016-0180-z

Dong B, Li C, Pan B (2019) Ultrasensitive video extensometer using single-camera dual field-of-view telecentric imaging system. Opt Lett 44(18):4499. https://doi.org/10.1364/ol.44.004499

Xing C, Xu H, Tan Y, Wang D, Zhai C (2020) Strain field distribution of asphalt mortar using digital image processing. Constr Build Mater 238:117624. https://doi.org/10.1016/j.conbuildmat.2019.117624

Goanta V (2020) Extensometer for determining strains on a tensile and torsion simultaneous load, Sensors (Switzerland) 20(2). https://doi.org/10.3390/s20020385

Hinge M, Johnson JA, Henriksen ML (2021) A low-cost tabletop tensile tester with optical extensometer. Mater Adv 2(19):6339–6343. https://doi.org/10.1039/d1ma00598g

Zhu F, Tao J, Lu R, Bai P, Lei D (2021) Advanced self-compensated, high-accuracy optical extensometer based on field-of-view splitting and dual-reflector imaging techniques. Meas J Int Meas Confed 2021(December 2020):109024. https://doi.org/10.1016/j.measurement.2021.109024

Hassan GM (2021) Deformation measurement in the presence of discontinuities with digital image correlation: a review. Opt Lasers Eng 137(September 2020):106394. https://doi.org/10.1016/j.optlaseng.2020.106394

Janeliukstis R, Chen X (2021) Review of digital image correlation application to large-scale composite structure testing. Compos Struct 271(April):114143. https://doi.org/10.1016/j.compstruct.2021.114143

Mata-Falcón J, Haefliger S, Lee M, Galkovski T, Gehri N (2020) Combined application of distributed fibre optical and digital image correlation measurements to structural concrete experiments. EngStruct 225(September). https://doi.org/10.1016/j.engstruct.2020.111309

Gehri N, Mata-Falcón J, Kaufmann W (2022) Refined extraction of crack characteristics in large-scale concrete experiments based on digital image correlation. Eng Struct 251(July 2021). https://doi.org/10.1016/j.engstruct.2021.113486

Tang Z, Li W, Peng Q, Tam VWY, Wang K (2022) Study on the failure mechanism of geopolymeric recycled concrete using digital image correlation method. J Sustain Cem Mater 11(2):161–180. https://doi.org/10.1080/21650373.2021.1897706

Merezhko MS, Merezhko DA, Rofman OV, Dikov AS, Maksimkin OP, Short MP (2022) Macro-Scale strain localization in highly irradiated stainless steel investigated using digital image correlation. Acta Mater 231:117858. https://doi.org/10.1016/j.actamat.2022.117858

Barkavi T, Natarajan C (2019) Processing digital image for measurement of crack dimensions in concrete. Civ Eng Infrastructures J 52(1):11–22. https://doi.org/10.22059/ceij.2019.246397.1444

Jiang SD et al (2020) Effect of strain rate on tensile behavior in amorphous fibers by an in-situ video extensometer system. Mater Sci Eng A 782(January):139252. https://doi.org/10.1016/j.msea.2020.139252

Xia DH et al (2020) Review-material degradation assessed by digital image processing: fundamentals, progresses, and challenges. J Mater Sci Technol 53:146–162. https://doi.org/10.1016/j.jmst.2020.04.033

Shunmugam MS, Kanthababu M (2018) Advances in simulation, product design and development

Mohan A, Poobal S (2018) Crack detection using image processing: a critical review and analysis. Alexandria Eng J 57(2):787–798. https://doi.org/10.1016/j.aej.2017.01.020

Hoang ND (2018) Detection of surface crack in building structures using image processing technique with an improved Otsu method for image thresholding. Adv Civ Eng 2018. https://doi.org/10.1155/2018/3924120

Shahrokhinasab E, Hosseinzadeh N, MonirAbbasi A, Torkaman S (2020) Performance of image-based crack detection systems in concrete structures. J Soft Comput Civ Eng. 4(1):127–139. https://doi.org/10.22115/SCCE.2020.218984.1174

Zhu F, Lu R, Gu J, Tao J, Bai P, Lei D (2020) High-resolution and high-accuracy optical extensometer based on a reflective imaging technique. Opt Lasers Eng 132(May):106136. https://doi.org/10.1016/j.optlaseng.2020.106136

Wang R (2018) Research on image processing based on improved particle swarm optimization. https://doi.org/10.1109/ICMTMA.2018.00135

Pitas I, Venetsanopoulos AN (1992) Order statistics in digital image processing. Proc IEEE 80(12):1893–1921

Ravi RV, Subramaniam K, Sundar TVR, Balaji P (2019) Optimization algorithms, an effective tool for the design of digital filters ; a review. J Ambient Intell Humaniz Comput. no. Singh 2014. https://doi.org/10.1007/s12652-019-01431-x

Poling J, Desai N, Fischer G, Georgakis C (2018) Effect of out-of-plane specimen movement on strain measurement using digital-image-correlation-based video measurement in 2D and 3D. J Civ Struct Heal Monit 8(2):331–352. https://doi.org/10.1007/s13349-018-0277-4

Yoneyama S (2006) Lens distortion correction for digital image correlation by measuring rigid body displacement. Opt Eng 45(2):023602. https://doi.org/10.1117/1.2168411

Mihai LA, Goriely A (2017) How to characterize a nonlinear elastic material? A review on nonlinear constitutive parameters in isotropic finite elasticity. Proc Math Phys Eng Sci 473(2207):20170607

Guedes R (2009) Assessing mechanical properties of a polymer, no. September. pp 7–11

Chen B, Chen W, Pan B (2020) High-precision video extensometer based on a simple dual field-of-view telecentric imaging system. Meas J Int Meas Confed 166:108209. https://doi.org/10.1016/j.measurement.2020.108209

Yu L, Lubineau G (2019) Modeling of systematic errors in stereo-digital image correlation due to camera self-heating. Sci Rep 9(1):1–15. https://doi.org/10.1038/s41598-019-43019-7

Patidar P, Gupta M, Srivastava S, Nagawat AK (2010) Image de-noising by various filters for different noise. Int J Comput Appl 9(4):45–50. https://doi.org/10.5120/1370-1846

G. To and T. H. E. Eurocodes (1993) Designers ’ guides to the eurocodes designers ’ guide to EN 1993–1–1 EUROCODE 3 : design of steel structures general rules and rules for Eurocode Designers ’ Guide Series

Feng L, Li S, Feng S (2017) Preparation and characterization of silicone rubber with high modulus via tension spring-type crosslinking. RSC Adv 7(22):13130–13137. https://doi.org/10.1039/c7ra00293a

Murrey Y (2007) Manual for LS-DYNA Wood Material Model 143. U S Dep Transp. no. August. Available: https://www.fhwa.dot.gov/publications/research/safety/04097/04097.pdf

Verma A, Mishra P (2008) Comparison of ductility of M20 and M25 concrete in elevated tank staging. Int Res J Eng Technol. 3714(June):3714–3716. Available: www.irjet.net)

Peng H, Yang Z, Li D, Wu L (2016) Experimental study on effect of focal length on quality of computational ghost imaging. Hongwai yu Jiguang Gongcheng/Infrared Laser Eng 45(8):1–6. https://doi.org/10.3788/IRLA201645.0824003

Xiao F, Farrell JE, Catrysse PB, Wandell B (2009) Mobile Imaging: the big challenge of the small pixel. Digit Photogr V 7250:72500K. https://doi.org/10.1117/12.806616