Nghiên cứu ảnh hưởng của tải trọng đến hành vi ma sát của vật liệu composite Cu gia cường bằng hạt Ti2SnC

Industrial Lubrication and Tribology - Tập 73 Số 2 - Trang 207-214 - 2021
Fangfang Zhang1, Fengyun Yan2, Tijun Chen2, Xiaohong Li1, Zhen Wang1
1School of Materials Science and Engineering, State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, China
2School of Materials Science and Engineering, State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, China and Gansu Nonferrous and Composite Materials Engineering Technology Research Center, Lanzhou, China

Tóm tắt

Mục đích Bài báo này nhằm nghiên cứu ảnh hưởng của tải trọng đến hành vi ma sát của các vật liệu composite dựa trên Cu, nhằm xác định tải trọng áp dụng phù hợp cho những vật liệu này. Thiết kế/phương pháp tiếp cận Các vật liệu composite dựa trên Cu được chế tạo bằng phương pháp nung chảy bột với việc gia nhiệt bằng dòng điện một chiều và được thử nghiệm bằng Máy thử cơ học toàn diện-3 với phương pháp bi trên đĩa ở nhiệt độ phòng. Kết quả Kết quả cho thấy rằng các vật liệu composite dựa trên Cu có thể phù hợp để làm việc dưới tải trọng thấp. Chỉ có tổn thương nhẹ trên bề mặt dưới tải trọng 2 N. Trong khi đó, có sự xuất hiện của vi nứt và các dấu hiệu xói mòn ở một độ sâu nhất định với tải trọng 20 N và 50 N. Ngoài ra, rõ ràng có ba vùng trong mặt cắt ngang của nền matrix, cụ thể là: lớp trộn cơ học, lớp gốm và nền tảng, tương ứng. Tính mới/giá trị Có hai cơ chế mài mòn ở các tải trọng khác nhau, và sự tiến triển của các bề mặt mài mòn theo thời gian trượt cũng được đề cập. Do đó, vật liệu đã phát triển có thể được sử dụng cho ứng dụng vật liệu tiếp xúc điện trượt dưới tải trọng nhẹ.

Từ khóa


Tài liệu tham khảo

2013, MAX Phases: Properties of Machinable Ternary Carbides and Nitrides

2012, Tribological properties of the different materials of the skid board under dry friction and wear, Journal of Dalian Maritime University, 1, 105

2017, The effects of Sn content on the microstructure and the formation mechanism of Ti2SnC powder by pressureless synthesis, Journal of Alloys and Compounds, 695, 2850, 10.1016/j.jallcom.2016.11.398

2016, Effect of reinforcement content on the density, mechanical and tribological properties of Ti3SiC2/Al2O3 hybrid reinforced copper-matrix pantograph slide, Science and Engineering of Composite Materials, 24, 1

2018, Deformation microstructure and chemical composition of surface layers of Cu and Al under friction in lubricated conditions, Tribology Letters, 66, 1

2019, Fabrication of graphene oxide-Ti3AlC2 synergistically reinforced copper matrix composites with enhanced tribological performance, Ceramics International, 45, 18592, 10.1016/j.ceramint.2019.06.082

2014, Effect of counterface on the tribological behavior of Ti3AlC2 at ambient, Tribology Letters, 53, 311, 10.1007/s11249-013-0269-9

2020, The lubricating properties of spark plasma sintered (SPS) Ti3SiC2 MAX phase compound and composite, Tribology Transactions, 63, 38, 10.1080/10402004.2019.1657534

2018, Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy, Transactions of Nonferrous Metals Society of China, 28, 946, 10.1016/S1003-6326(18)64729-6

2013, Solid lubricants: a review, Journal of Materials Science, 48, 511, 10.1007/s10853-012-7038-2

1998, The solid particle erosion behavior of Al18B4O33 whisker-reinforced AC4C al alloy matrix composites, Wear, 223, 22

2018, High temperature tribological properties of Cu-2Ni-5Sn-Graphite-PbO self-lubricating composites, Tribology, 38, 84

2002, Dry sliding friction and wear behavior of Cu-Nanosized TiB2 in-situ composites, Tribology, 22, 414

2012, Principles of Tribology, 4th ed.

2006, Tribological behavior of Ti2SnC particulate reinforced copper matrix composites, Materials Science and Engineering: A), 422, 266

2014, Effect of sliding speed and applied load on dry sliding tribological performance of TiAl matrix self-lubricating composites, Tribology Letters, 55, 393, 10.1007/s11249-014-0367-3

2011, Materials Analysis Methods, 3rd ed

2000, Development of two-dimensional titanium tin carbide (Ti2SnC) plates based on the electronic structure investigation, Materials Research Innovations, 4, 36, 10.1007/s100190000065